Re: Problem with ioremap which returns NULL in 2.6 kernel
From: Markus Lidel
Date: Wed Jun 02 2004 - 03:49:44 EST
Hello,
Jeff Garzik wrote:
could someone help me with a ioremap problem. If there are two
controllers plugged in, the ioremap request for the first controller
is successfull, but the second returns NULL. Here is the output of
the driver:
i2o: Checking for PCI I2O controllers...
i2o: I2O controller on bus 0 at 72.
i2o: PCI I2O controller at 0xD0000000 size=134217728
I2O: MTRR workaround for Intel i960 processor
i2o/iop0: Installed at IRQ17
i2o: I2O controller on bus 0 at 96.
i2o: PCI I2O controller at 0xD8000000 size=134217728
i2o: Unable to map controller.
probably too large an area to be remapping. Try remapping only the
memory area needed, and not the entire area.
Is there a way, to increase the size, which could be remapped, or is
there a way, to find out what is the maximum size which could be
remapped?
My preferred approach would be: consider that the hardware does not
need the entire 0x8000000-byte area mapped. Plain and simple.
This is a "don't do that" situation, and that renders the other
questions moot :) You should only be mapping what you need to map.
Okay, i'll let try it out with only 64MB.
Thanks again for your help!
Best regards,
Markus Lidel
------------------------------------------
Markus Lidel (Senior IT Consultant)
Shadow Connect GmbH
Carl-Reisch-Weg 12
D-86381 Krumbach
Germany
Phone: +49 82 82/99 51-0
Fax: +49 82 82/99 51-11
E-Mail: Markus.Lidel@xxxxxxxxxxxxxxxxx
URL: http://www.shadowconnect.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/