Re: problems with SATA: 2.6.7 working, -bk12/13/-mm4 not

From: Jeff Garzik
Date: Wed Jun 30 2004 - 18:21:59 EST

Next message: Jamie Lokier: "Re: A question about PROT_NONE on ARM and ARM26"
Previous message: Paul Mackerras: "Re: [PATCH] PPC64: (resend) Janitor signature of rtas_call() routine"
In reply to: Danny ter Haar: "problems with SATA: 2.6.7 working, -bk12/13/-mm4 not"
Next in thread: Danny ter Haar: "Re: problems with SATA: 2.6.7 working, -bk12/13/-mm4 not"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Danny ter Haar wrote:

1U 19" server supermicro with ICH5 & P4.

runs 2.6.7 vanilla without problems.

tried -bk12/-bk13/-mm4 which won't work
Machine is on serial console and captures output looks like
this:

Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2595.0172 MHz. ..... host bus clock speed is 199.0628 MHz. checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb1b0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 *12 14 15) SCSI subsystem initialized PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22 ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23 testing the IO APIC....................... .................................... done. Starting balanced_irq Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@xxxxxxxxxxxxx) devfs: boot_options: 0x0 SGI XFS with ACLs, security attributes, no debug enabled SGI XFS Quota Management subsystem SELinux: Registering netfilter hooks Initializing Cryptographic API Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.2.52-k4 Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection netconsole: not configured, aborting ata_piix: combined mode detected ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata1: dev 1 ATA, max UDMA/100, 488397168 sectors: lba48 ata1: dev 0 configured for UDMA/100 ata1: dev 1 configured for UDMA/100 scsi0 : ata_piix Using anticipatory io scheduler Vendor: ATA Model: Maxtor 6Y200M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15 ata2: dev 0 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0:<3>ata1: command 0x25 timeout, stat 0xd0 hos4
scsi0: ERROR on channel 0, id 0, lun 0, CDB: Read (10) 00 00 00 00 00 00 00 08 Current sda: sense key Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sda, sector 0 ATA: abnormal status 0xD0 on port 0x1F7 ATA: abnormal status 0xD0 on port 0x1F7 ATA: abnormal status 0xD0 on port 0x1F7

Can you try:

* disabling combined mode in BIOS
* finding which -bk snapshot breaks your system
* acpi=off (disabling ACPI)
* noapic
* copying the following files verbatim into your 2.6.7-{bk12,bk13,mm4} tree:
drivers/scsi/libata*.[ch]
drivers/scsi/ata_*.c
drivers/scsi/sata_*.[ch]
include/linux/libata.h
include/linux/ata.h

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Jamie Lokier: "Re: A question about PROT_NONE on ARM and ARM26"
Previous message: Paul Mackerras: "Re: [PATCH] PPC64: (resend) Janitor signature of rtas_call() routine"
In reply to: Danny ter Haar: "problems with SATA: 2.6.7 working, -bk12/13/-mm4 not"
Next in thread: Danny ter Haar: "Re: problems with SATA: 2.6.7 working, -bk12/13/-mm4 not"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]