Re: [patch] voluntary-preempt-2.6.8-rc2-O2

[Shane Shrybman]

I was unable to boot -O2. It seemed to hang up when it got to the
aic7xxx(29160) scsi controller.

Boot messages copied by hand:

IRQ #16 thread started up.
delay 5 -10 secs
IRQ #19 thread started up.
delay 5 -10 secs
ahc_intr: HOST_MSG_LOOP bad phase 0x0
(repeats every 10-20 secs)
Waited a few minutes here before giving up and hitting reset.

Here is /proc/interrupts in 2.6.7-mm7
           CPU0       
  0:     740456    IO-APIC-edge  timer
  1:       1417    IO-APIC-edge  i8042
  8:          4    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 14:         14    IO-APIC-edge  ide0
 15:         14    IO-APIC-edge  ide1
 16:        178   IO-APIC-level  ide3, EMU10K1
 17:       2491   IO-APIC-level  eth0
 19:      10335   IO-APIC-level  aic7xxx, bttv0, Bt87x audio
 21:      29074   IO-APIC-level  uhci_hcd, uhci_hcd, uhci_hcd, uhci_hcd
 22:          0   IO-APIC-level  VIA8233
NMI:          0 
LOC:     740415 
ERR:          0
MIS:          0

Also, had to turn of parport in the config to get it to compile.

drivers/parport/share.c:77: unknown field `generic_enable_irq' specified
in initializer
drivers/parport/share.c:78: unknown field `generic_disable_irq'
specified in initializer

Regards,

Shane

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/