Re: Network routing issue

[Richard B. Johnson]

On Tue, 10 Aug 2004, Luesley, William wrote:

>
> I have two devices setup as follows:
>
>
>           A --------------- B
> 192.168.1.1                 192.168.1.2
>
>
> The machines open a number of TCP and UDP ports with which to communicate.
> In order to help testing, I have been asked to place a third machine between
> these two which will be capable of intercepting and modifying any messages.
> My initial plan was to have a device which could mimic both ends of the
> connection (as I already have code to do this); with each connection being
> on a separate NIC, leading to a setup as shown below:
>
>           A ------------ C  C  ---------- B
> 192.168.1.1    192.168.1.2  192.168.1.1   192.168.1.2
>                     (eth0)  (eth1)
>
> The obvious problem with this is that as C implements both ends of the
> interface, any messages it sends are routed internally, rather than being
> sent to the correct host.
>
> I thought it would be possible to correct this by specifying the host routes
> using the route command, i.e. setting a route to 192.168.1.1 via device eth0
> and to 192.168.1.2 via eth1, therefore stopping the internal routing from
> occurring. Even with these routes setup, the messages are still routed
> internally.
>
>
>
> Can the route somehow be forced?
>
> If not, is there a way to stop the internal routing, preferably without a
> code change to the kernel (if it is a code change - can someone point me
> towards the file)?
>
> Can I use IP Tables, how?
>
> Or, am I on totally the wrong track?
>
>
> Thanks for peoples time spent reading and looking into this.
>
>
>
>
>

`ifconfig lo down` should force your stuff to go through the
ethernet for testing.

Cheers,
Dick Johnson
Penguin : Linux version 2.4.26 on an i686 machine (5570.56 BogoMips).
            Note 96.31% of all statistics are fiction.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/