[PATCH 2.6.8.1] sata_nv.c

[achew]

This patch fixes a problem introduced when CK804 support was added.  mmio_base can only be set in the CK804 case,
else libata will attempt to iounmap mmio_base, which isn't iomapped for the non-CK804 case.  Still need the bar 5
address, so steal from host_set->ports[0]->ioaddr.scr_addr.  Jeff, let me know if this is a bad thing to do.




--- linux-2.6.8.1/drivers/scsi/sata_nv.c	2004-08-19 13:38:27.630375944 -0700
+++ linux/drivers/scsi/sata_nv.c	2004-08-19 13:36:05.668957360 -0700
@@ -20,6 +20,10 @@
 *  If you do not delete the provisions above, a recipient may use your
 *  version of this file under either the OSL or the GPL.
 *
+ *  0.03
+ *     - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using
+ *       mmio_base, which is only set for the CK804/MCP04 case.
+ *
 *  0.02
 *     - Added support for CK804 SATA controller.
 *
@@ -40,7 +44,7 @@
#include <linux/libata.h>

#define DRV_NAME			"sata_nv"
-#define DRV_VERSION			"0.02"
+#define DRV_VERSION			"0.03"

#define NV_PORTS			2
#define NV_PIO_MASK			0x1f
@@ -417,33 +421,33 @@
	u8 intr_mask;

	outb(NV_INT_STATUS_HOTPLUG,
-		(unsigned long)probe_ent->mmio_base + NV_INT_STATUS);
+		probe_ent->port[0].scr_addr + NV_INT_STATUS);

-	intr_mask = inb((unsigned long)probe_ent->mmio_base + NV_INT_ENABLE);
+	intr_mask = inb(probe_ent->port[0].scr_addr + NV_INT_ENABLE);
	intr_mask |= NV_INT_ENABLE_HOTPLUG;

-	outb(intr_mask, (unsigned long)probe_ent->mmio_base + NV_INT_ENABLE);
+	outb(intr_mask, probe_ent->port[0].scr_addr + NV_INT_ENABLE);
}

static void nv_disable_hotplug(struct ata_host_set *host_set)
{
	u8 intr_mask;

-	intr_mask = inb((unsigned long)host_set->mmio_base + NV_INT_ENABLE);
+	intr_mask = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);

	intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);

-	outb(intr_mask, (unsigned long)host_set->mmio_base + NV_INT_ENABLE);
+	outb(intr_mask, host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
}

static void nv_check_hotplug(struct ata_host_set *host_set)
{
	u8 intr_status;

-	intr_status = inb((unsigned long)host_set->mmio_base + NV_INT_STATUS);
+	intr_status = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);

	// Clear interrupt status.
-	outb(0xff, (unsigned long)host_set->mmio_base + NV_INT_STATUS);
+	outb(0xff, host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);

	if (intr_status & NV_INT_STATUS_HOTPLUG) {
		if (intr_status & NV_INT_STATUS_PDEV_ADDED)


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/