Re: The ultimate TOE design

From: Neil Horman
Date: Wed Sep 15 2004 - 20:22:10 EST


Paul Jakma wrote:
On Wed, 15 Sep 2004, Jeff Garzik wrote:

Put simply, the "ultimate TOE card" would be a card with network ports, a generic CPU (arm, mips, whatever.), some RAM, and some flash. This card's "firmware" is the Linux kernel, configured to run as a _totally indepenent network node_, with IP address(es) all its own.

Then, your host system OS will communicate with the Linux kernel running on the card across the PCI bus, using IP packets (64K fixed MTU).


My dream is that some vendor will come along and implement such a design, and sell it in enough volume that it's US$100 or less. There are a few cards on the market already where implementing this design _may_ be possible, but they are all fairly expensive.


The intel IXP's are like the above, XScale+extra-bits host-on-a-PCI card running Linux. Or is that what you were referring to with "<cards exist> but they are all fairly expensive."?

Jeff


regards,

IBM's PowerNP chip was also very simmilar (a powerpc core with lots of hardware assists for DMA and packet inspection in the extended register area). Don't know if they still sell it, but at one time I had heard they had booted linux on it.
Neil

--
/***************************************************
*Neil Horman
*Software Engineer
*Red Hat, Inc.
*nhorman@xxxxxxxxxx
*gpg keyid: 1024D / 0x92A74FA1
*http://pgp.mit.edu
***************************************************/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/