Re: md hangs while rebuilding

From: Shesha B.
Date: Fri Oct 01 2004 - 17:01:20 EST


I am sorry. :(

Here are the configurations ....

(1) The linux kernel version : 2.4.26


(2) md information
---------------------

/dev/md0 on / type ext3 (rw,data=journal)
none on /proc type proc (rw)
/dev/md2 on /var type ext3 (rw,data=journal)
/dev/md7 on /var/nas type ext3 (rw,data=journal)
/dev/md5 on /tmp type ext3 (rw,data=journal)
/dev/md6 on /var/log type ext3 (rw,data=journal)
/dev/md1 on /alt type ext3 (rw,data=journal)
/dev/md3 on /opt type ext3 (rw,data=journal)
/dev/md4 on /mnt type ext3 (rw,data=journal)


(3) Partition Information
----------------------------

All 9 disk (sda-sdi) is partitioned as follows

Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 51 409657 fd Linux raid autodetect
/dev/sda2 52 102 409657+ fd Linux raid autodetect
/dev/sda3 103 111 72292+ 82 Linux swap
/dev/sda4 112 30401 243304425 5 Extended
/dev/sda5 112 137 208844+ fd Linux raid autodetect
/dev/sda6 138 176 313267 fd Linux raid autodetect
/dev/sda7 177 179 24097 fd Linux raid autodetect
/dev/sda8 180 205 208844+ fd Linux raid autodetect
/dev/sda9 206 244 313267 fd Linux raid autodetect
/dev/sda10 245 267 184747 fd Linux raid autodetect
/dev/sda11 268 30401 242051352+ 83 Linux

---------------

Please let me know if any more info is required. Any help is regarded.

-Shesha

On Fri, 2004-10-01 at 13:57, bert hubert wrote:
> On Fri, Oct 01, 2004 at 12:16:51PM -0700, Shesha B. Sreenivasamurthy wrote:
>
> > I have 9 disks raid 1. I pulled out 4 disks, and using raidhotadd I
> > triggered a rebuild on 3 of them. While rebuilding md1, the rebuilding
> > process is stuck at 0.0%. Below is a snapshot of "/proc/mdstat".
>
> Please please please tell people what kernel you run with and your exact
> configuration.
--
.-----.
/ \
{ o | o }
|
\_/


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/