opps 2.6.9-r3-mm3

From: Lawrence Walton
Date: Thu Oct 07 2004 - 15:05:58 EST

Next message: Paul Fulghum: "[RFC][PATCH] TTY flip buffer SMP changes"
Previous message: Paul Jackson: "Re: [Lse-tech] [PATCH] cpusets - big numa cpu and memory placement"
Next in thread: Andrew Morton: "Re: opps 2.6.9-r3-mm3"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi I had repeated oops after boot-up. Looked like scheduler stuff.
Not sure what else is needed this is a all scsi system if that is any
help for debuging.

As always I'm willing to try patches or give any additional information
as needed.

Included decoded oops, ver_linux, and lspci -vvv

ksymoops 2.4.9 on i686 2.6.9-rc3-mm3n. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.6.9-rc3-mm3n/ (default)
-m /System.map (specified)

Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
Oct 7 09:34:10 the-penguin kernel: Unable to handle kernel paging request at virtual address 0001530c
Oct 7 09:34:10 the-penguin kernel: c0116f21
Oct 7 09:34:10 the-penguin kernel: *pde = 00000000
Oct 7 09:34:10 the-penguin kernel: Oops: 0002 [#1]
Oct 7 09:34:10 the-penguin kernel: CPU: 0
Oct 7 09:34:10 the-penguin kernel: EIP: 0060:[profile_hit+33/48] Not tainted VLI
Oct 7 09:34:10 the-penguin kernel: EFLAGS: 00010086 (2.6.9-rc3-mm3n)
Oct 7 09:34:10 the-penguin kernel: eax: 00000000 ebx: eebaa0a0 ecx: 00000000 edx: 0001530c
Oct 7 09:34:10 the-penguin kernel: esi: ffffffea edi: 00000000 ebp: eebc7fbc esp: eebc7f98
Oct 7 09:34:10 the-penguin kernel: ds: 007b es: 007b ss: 0068
Oct 7 09:34:10 the-penguin kernel: Stack: c0113c5a c046be60 f69c5820 b8000c00 00000086 00000000 00000d62 00000001
Oct 7 09:34:10 the-penguin kernel: b7a0d2a0 eebc6000 c01056eb 00000d62 00000000 bffff458 00000001 b7a0d2a0
Oct 7 09:34:10 the-penguin kernel: bffff458 0000009c 0000007b 0000007b 0000009c b7b17504 00000073 00000246
Oct 7 09:34:10 the-penguin kernel: Call Trace:
Oct 7 09:34:10 the-penguin kernel: Code: 00 00 00 8d bc 27 00 00 00 00 8b 0d ec 10 47 c0 a1 e8 10 47 c0 81 ea 28 02 10 c0 d3 ea 48 39 d0 0f 46 d0 a1 e4 10 47 c0 8d 14 90 <ff> 02 c3 8d b6 00 00 00 00 8d bf 00 00 00 00 b8 da ff ff ff c3
Using defaults from ksymoops -t elf32-i386 -a i386

>>ebx; eebaa0a0 <pg0+2e7230a0/3fb77400>
>>esi; ffffffea <__kernel_rt_sigreturn+1baa/????>
>>ebp; eebc7fbc <pg0+2e740fbc/3fb77400>
>>esp; eebc7f98 <pg0+2e740f98/3fb77400>

Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????>
00000000 <_EIP>:
Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????>
0: 00 00 add %al,(%eax)
Code; ffffffd7 <__kernel_rt_sigreturn+1b97/????>
2: 00 8d bc 27 00 00 add %cl,0x27bc(%ebp)
Code; ffffffdd <__kernel_rt_sigreturn+1b9d/????>
8: 00 00 add %al,(%eax)
Code; ffffffdf <__kernel_rt_sigreturn+1b9f/????>
a: 8b 0d ec 10 47 c0 mov 0xc04710ec,%ecx
Code; ffffffe5 <__kernel_rt_sigreturn+1ba5/????>
10: a1 e8 10 47 c0 mov 0xc04710e8,%eax
Code; ffffffea <__kernel_rt_sigreturn+1baa/????>
15: 81 ea 28 02 10 c0 sub $0xc0100228,%edx
Code; fffffff0 <__kernel_rt_sigreturn+1bb0/????>
1b: d3 ea shr %cl,%edx
Code; fffffff2 <__kernel_rt_sigreturn+1bb2/????>
1d: 48 dec %eax
Code; fffffff3 <__kernel_rt_sigreturn+1bb3/????>
1e: 39 d0 cmp %edx,%eax
Code; fffffff5 <__kernel_rt_sigreturn+1bb5/????>
20: 0f 46 d0 cmovbe %eax,%edx
Code; fffffff8 <__kernel_rt_sigreturn+1bb8/????>
23: a1 e4 10 47 c0 mov 0xc04710e4,%eax
Code; fffffffd <__kernel_rt_sigreturn+1bbd/????>
28: 8d 14 90 lea (%eax,%edx,4),%edx
Code; 00000000 Before first symbol
2b: ff 02 incl (%edx)
Code; 00000002 Before first symbol
2d: c3 ret
Code; 00000003 Before first symbol
2e: 8d b6 00 00 00 00 lea 0x0(%esi),%esi
Code; 00000009 Before first symbol
34: 8d bf 00 00 00 00 lea 0x0(%edi),%edi
Code; 0000000f Before first symbol
3a: b8 da ff ff ff mov $0xffffffda,%eax
Code; 00000014 Before first symbol
3f: c3 ret

1 error issued. Results may not be reliable.

If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux the-penguin 2.6.9-rc3n #3 Thu Oct 7 09:44:18 PDT 2004 i686 GNU/Linux

Gnu C 3.3.4
Gnu make 3.80
binutils 2.15
util-linux 2.12
mount 2.12
module-init-tools 3.1-pre5
e2fsprogs 1.35
reiserfsprogs line
reiser4progs line
quota-tools 3.12.
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.2.3
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.2.1
Modules Loaded nls_cp850 smbfs deflate zlib_inflate aes_i586 esp6 ah6 ipcomp esp4 ah4 xfrm_user wp512 twofish tea sha512 sha256 sha1 serpent md5 md4 khazad des crypto_null cast6 cast5 blowfish zlib_deflate binfmt_misc ipv6 ehci_hcd uhci_hcd 3c59x mii snd_cmipci snd_opl3_lib snd_hwdep snd_mpu401_uart snd_rawmidi nls_iso8859_15 nls_utf8 nls_iso8859_1 nls_cp437 nls_cp950 radeon via_agp agpgart sg sr_mod cdrom

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Subsystem: Asustek Computer, Inc. A7V333 Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: de800000-df6fffff
Prefetchable memory behind bridge: dff00000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: <available only to root>

0000:00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at b800 [size=256]
Capabilities: <available only to root>

0000:00:06.0 RAID bus controller: Promise Technology, Inc. PDC20276 (MBFastTrak133 Lite) (rev 01) (prog-if 85)
Subsystem: Asustek Computer, Inc.: Unknown device 807e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b400 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a400 [size=4]
Region 4: I/O ports at a000 [size=16]
Region 5: Memory at de000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>

0000:00:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 35 (500ns min, 1000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dd800000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at dd000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>

0000:00:09.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at 9800 [size=32]
Capabilities: <available only to root>

0000:00:09.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 16
Region 4: I/O ports at 9400 [size=32]
Capabilities: <available only to root>

0000:00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x10 (64 bytes)
Interrupt: pin C routed to IRQ 17
Region 0: Memory at dc800000 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>

0000:00:0c.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01)
Subsystem: Tekram Technology Co.,Ltd. DC-390U2W
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (7500ns min, 16000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 9000 [size=256]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at db800000 (32-bit, non-prefetchable) [size=4K]

0000:00:0e.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
Subsystem: LSI Logic / Symbios Logic: Unknown device 1060
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 8800 [size=256]
Region 1: Memory at db000000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at da800000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>

0000:00:0f.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 8400 [size=128]
Region 1: Memory at da000000 (32-bit, non-prefetchable) [size=128]
Capabilities: <available only to root>

0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <available only to root>

0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc. A7V8X motherboard
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 8000 [disabled] [size=16]
Capabilities: <available only to root>

0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. VT6202 USB2.0 4 port controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 21
Region 4: I/O ports at 7800 [size=32]
Capabilities: <available only to root>

0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 23) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. VT6202 USB2.0 4 port controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 21
Region 4: I/O ports at 7400 [size=32]
Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] (prog-if 00 [VGA])
Subsystem: PC Partner Limited Radeon R200 QL [Sapphire Radeon 8500 LE]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <available only to root>

--
*--* Mail: lawrence@xxxxxxxx
*--* Voice: 425.739.4247
*--* Fax: 425.827.9577
*--* HTTP://the-penguin.otak.com/~lawrence
--------------------------------------
- - - - - - O t a k i n c . - - - - -

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Paul Fulghum: "[RFC][PATCH] TTY flip buffer SMP changes"
Previous message: Paul Jackson: "Re: [Lse-tech] [PATCH] cpusets - big numa cpu and memory placement"
Next in thread: Andrew Morton: "Re: opps 2.6.9-r3-mm3"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]