Re: [PATCH] PCI fixes for 2.6.10-rc1

From: Greg KH
Date: Fri Nov 12 2004 - 20:46:07 EST


ChangeSet 1.2091.1.24, 2004/11/12 14:12:11-08:00, hannal@xxxxxxxxxx

[PATCH] pplus.c: replace pci_find_device with pci_get_device

Signed-off-by: Hanna Linder <hannal@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <greg@xxxxxxxxx>


arch/ppc/platforms/pplus.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)


diff -Nru a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
--- a/arch/ppc/platforms/pplus.c 2004-11-12 15:09:04 -08:00
+++ b/arch/ppc/platforms/pplus.c 2004-11-12 15:09:04 -08:00
@@ -359,7 +359,7 @@
* Perform specific configuration for the Via Tech or
* or Winbond PCI-ISA-Bridge part.
*/
- if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_1, dev))) {
/*
* PPCBUG does not set the enable bits
@@ -371,7 +371,7 @@
pci_write_config_byte(dev, 0x40, reg);
}

- if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_2,
dev)) && (dev->devfn = 0x5a)) {
/* Force correct USB interrupt */
@@ -379,7 +379,7 @@
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
}

- if ((dev = pci_find_device(PCI_VENDOR_ID_WINBOND,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
PCI_DEVICE_ID_WINBOND_83C553, dev))) {
/* Clear PCI Interrupt Routing Control Register. */
short_reg = 0x0000;
@@ -389,7 +389,7 @@
pci_write_config_byte(dev, 0x43, reg);
}

- if ((dev = pci_find_device(PCI_VENDOR_ID_WINBOND,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
PCI_DEVICE_ID_WINBOND_82C105, dev))) {
/*
* Disable LEGIRQ mode so PCI INTS are routed
@@ -401,6 +401,7 @@
dev->irq = 14;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
}
+ pci_dev_put(dev);
}

void __init pplus_set_VIA_IDE_legacy(void)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/