Re: pci-resume patch from 2.6.7-rc2 breakes S3 resume on some machines

[Pavel Machek]

Hi!

> I'm in the process of debugging S3 on my notebook and found out that I
> can resume from S3 with every kernel up to (and including) 2.6.7-rc1
> ( patch-2.6.6-bk8-bk9.bz2 ).
> 
> After 2.6.7-rc1, my notebook freezes upon a resume from S3. Tested with
> 2.6.7-rc2, -rc3, 2.6.8.1, 2.6.9 and some 2.6.10-rcX-bkX kernels.
> 
> Please note that these tests were run in single user mode with a
> barebone kernel
> .config (attached) just enough to boot (ie no modules, no usb etc)
> 
> I have found a hint on the web that the pci-resume code, which was
> included in 2.6.7-rc2, might cause this problem. I removed the call to
> pci_default_resume in drivers/pci/pci-driver.c and my laptop resumed
> into a working state again ( tested
> with 2.6.7 and 2.6.9 ).
> 
> I've written an email to Arjan van de Ven, the author of the resume
> patch and he suggested positing here, along with a full lspci output
> (attached)
> He thinks that some device is misbehaving and causing trouble if
> resumed.

Okay, patch is way too ugly. You probably should provide resume method
for your radeon that just does nothing. That should confirm your
theory, fix the crash, and you'll avoid touching common code with it.

								Pavel
-- 
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/