Re: [PATCH] smsc-ircc2: Add PnP support.

[Meelis Roos]

I tried it with pnpbios (acpi=off) and it started to work after auto and 
activate (but not with auto alone):

nartsiss:/# modprobe smsc-ircc2
found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
smsc_superio_flat(): IrDA not enabled
smsc_superio_flat(): fir: 0x00, sir: 0x00, dma: 15, irq: 0, mode: 0x02
FATAL: Error inserting smsc_ircc2 (/lib/modules/2.6.10-rc2/kernel/drivers/net/irda/smsc-ircc2.ko): No such device
nartsiss:/# echo activate > resources
pnp: Device 00:0f activated.
nartsiss:/# modprobe smsc-ircc2
found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
smsc_superio_flat(): fir: 0x2e8, sir: 0x100, dma: 03, irq: 5, mode: 0x0e
SMsC IrDA Controller found
 IrCC version 2.0, firport 0x2e8, sirport 0x100 dma=3, irq=5
No transceiver found. Defaulting to Fast pin select
IrDA: Registered device irda0

> > > Could you send me the result of : "for i in /sys/bus/pnp/devices/*; do cat 
> > > $i/id $i/options; done" in order to see if other devices have missing 
> > > resources ?

The output with pnpbios is below for comparision.

> > PNP0c01
> > PNP0200
> > PNP0800
> > PNP0c04
> > PNP0303
> > PNP0f13
> > PNP0b00
> > PNP0c02
> > PNP0700
> > port 0x3f0-0x3f0, align 0x0, size 0x6, 16-bit address decoding
> > port 0x3f7-0x3f7, align 0x0, size 0x1, 16-bit address decoding
> > irq 6 High-Edge
> > dma 2 8-bit compatible
> floppy : seem ok
> > PNP0501
> > Dependent: 01 - Priority acceptable
> >    port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
> > Dependent: 02 - Priority acceptable
> >    port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
> > Dependent: 03 - Priority acceptable
> >    port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
> > Dependent: 04 - Priority acceptable
> >    port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
> serial miss irq
> > SMCf010
> > Dependent: 01 - Priority acceptable
> >    port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
> > Dependent: 02 - Priority acceptable
> >    port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
> > Dependent: 03 - Priority acceptable
> >    port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
> > Dependent: 04 - Priority acceptable
> >    port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
> irda : miss io,irq,dma
> > PNP0401
> > Dependent: 01 - Priority acceptable
> >    port 0x378-0x378, align 0x0, size 0x3, 16-bit address decoding
> >    port 0x778-0x778, align 0x0, size 0x3, 16-bit address decoding
> >    irq 7 High-Edge
> > Dependent: 02 - Priority acceptable
> >    port 0x278-0x278, align 0x0, size 0x3, 16-bit address decoding
> >    port 0x678-0x678, align 0x0, size 0x3, 16-bit address decoding
> >    irq 5 High-Edge
> > Dependent: 03 - Priority acceptable
> >    port 0x3bc-0x3bc, align 0x0, size 0x3, 16-bit address decoding
> >    port 0x7bc-0x7bc, align 0x0, size 0x3, 16-bit address decoding
> >    irq 7 High-Edge
> parallel port: miss dma
> > TOS6200

PNP0c01
PNP0200
PNP0000
PNP0100
PNP0800
PNP0c04
PNP0303
PNP0f13
irq 12 High-Edge
PNP0b00
PNP0c02
PNP0700
port 0x3f0-0x3f0, align 0x0, size 0x6, 16-bit address decoding
port 0x3f7-0x3f7, align 0x0, size 0x1, 16-bit address decoding
irq 6 High-Edge
dma 2 8-bit byte-count compatible
PNP0501
irq 3,4,5,7,10,11 High-Edge
Dependent: 01 - Priority acceptable
   port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 02 - Priority acceptable
   port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 03 - Priority acceptable
   port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 04 - Priority acceptable
   port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
SMCf010
PNP0510
port 0x100-0x130, align 0xf, size 0x8, 16-bit address decoding
irq 3,4,5,7,10,11 High-Edge
dma 1,2,3 16-bit byte-count compatible
Dependent: 01 - Priority acceptable
   port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 02 - Priority acceptable
   port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 03 - Priority acceptable
   port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 04 - Priority acceptable
   port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
PNP0401
dma 1,2,3 8-bit byte-count compatible
Dependent: 01 - Priority acceptable
   port 0x378-0x378, align 0x0, size 0x3, 16-bit address decoding
   port 0x778-0x778, align 0x0, size 0x3, 16-bit address decoding
   irq 7 High-Edge
Dependent: 02 - Priority acceptable
   port 0x278-0x278, align 0x0, size 0x3, 16-bit address decoding
   port 0x678-0x678, align 0x0, size 0x3, 16-bit address decoding
   irq 5 High-Edge
Dependent: 03 - Priority acceptable
   port 0x3bc-0x3bc, align 0x0, size 0x3, 16-bit address decoding
   port 0x7bc-0x7bc, align 0x0, size 0x3, 16-bit address decoding
   irq 7 High-Edge
PNP0a03
PNP0e03
PNP0e00
Dependent: 01 - Priority acceptable
   port 0x3e0-0x3e0, align 0x0, size 0x2, 16-bit address decoding
   irq <none> High-Edge
Dependent: 02 - Priority acceptable
   port 0x3e0-0x3e0, align 0x0, size 0x2, 16-bit address decoding
   irq 3,4,5,7,10,11 High-Edge

--
Meelis Roos (mroos@xxxxxxxx)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/