[2.6 patch] small ftape cleanups (fwd)

From: Adrian Bunk
Date: Sat Nov 20 2004 - 16:22:51 EST



The patch forwarded below still applies and compiles against
2.6.10-rc2-mm2.

Please apply.


----- Forwarded message from Adrian Bunk <bunk@xxxxxxxxx> -----

Date: Sat, 6 Nov 2004 23:24:32 +0100
From: Adrian Bunk <bunk@xxxxxxxxx>
To: linux-kernel@xxxxxxxxxxxxxxx
Subject: [2.6 patch] small ftape cleanups

The patch below does cleanups under drivers/char/rio/ including the
following:
- remove some completely unused code
- make some needlessly global code static


diffstat output:
drivers/char/ftape/compressor/zftape-compress.c | 4
drivers/char/ftape/lowlevel/fc-10.c | 4
drivers/char/ftape/lowlevel/fdc-io.c | 67 ++--------------
drivers/char/ftape/lowlevel/fdc-io.h | 5 -
drivers/char/ftape/lowlevel/ftape-bsm.c | 8 +
drivers/char/ftape/lowlevel/ftape-bsm.h | 1
drivers/char/ftape/lowlevel/ftape-ctl.c | 15 +--
drivers/char/ftape/lowlevel/ftape-ctl.h | 1
drivers/char/ftape/lowlevel/ftape-init.c | 6 -
drivers/char/ftape/lowlevel/ftape-io.c | 24 -----
drivers/char/ftape/lowlevel/ftape-io.h | 4
drivers/char/ftape/lowlevel/ftape-proc.c | 4
drivers/char/ftape/lowlevel/ftape-rw.c | 2
drivers/char/ftape/lowlevel/ftape-rw.h | 1
drivers/char/ftape/zftape/zftape-buffers.c | 7 -
drivers/char/ftape/zftape/zftape-buffers.h | 1
drivers/char/ftape/zftape/zftape-init.c | 13 ---
drivers/char/ftape/zftape/zftape-init.h | 1
drivers/char/ftape/zftape/zftape-rw.c | 1
drivers/char/ftape/zftape/zftape-rw.h | 1
drivers/char/ftape/zftape/zftape-vtbl.c | 4
drivers/char/ftape/zftape/zftape-vtbl.h | 1
drivers/char/ftape/zftape/zftape_syms.c | 1
23 files changed, 31 insertions(+), 145 deletions(-)


Signed-off-by: Adrian Bunk <bunk@xxxxxxxxx>

--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/compressor/zftape-compress.c.old 2004-11-06 21:35:54.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/compressor/zftape-compress.c 2004-11-06 21:36:04.000000000 +0100
@@ -27,10 +27,6 @@
* changed * appropriately. See below.
*/

- char zftc_src[] ="$Source: /homes/cvs/ftape-stacked/ftape/compressor/zftape-compress.c,v $";
- char zftc_rev[] = "$Revision: 1.1.6.1 $";
- char zftc_dat[] = "$Date: 1997/11/16 15:15:56 $";
-
#include <linux/version.h>
#include <linux/errno.h>
#include <linux/mm.h>
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/fc-10.c.old 2004-11-06 21:36:15.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/fc-10.c 2004-11-06 21:36:30.000000000 +0100
@@ -56,13 +56,13 @@
#include "../lowlevel/fdc-io.h"
#include "../lowlevel/fc-10.h"

-__u16 inbs_magic[] = {
+static __u16 inbs_magic[] = {
0x3, 0x3, 0x0, 0x4, 0x7, 0x2, 0x5, 0x3, 0x1, 0x4,
0x3, 0x5, 0x2, 0x0, 0x3, 0x7, 0x4, 0x2,
0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
};

-__u16 fc10_ports[] = {
+static __u16 fc10_ports[] = {
0x180, 0x210, 0x2A0, 0x300, 0x330, 0x340, 0x370
};

--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/fdc-io.h.old 2004-11-06 21:39:01.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/fdc-io.h 2004-11-06 21:42:09.000000000 +0100
@@ -210,7 +210,6 @@
extern volatile fdc_mode_enum fdc_mode;
extern int fdc_setup_error; /* outdated ??? */
extern wait_queue_head_t ftape_wait_intr;
-extern int ftape_motor; /* fdc motor line state */
extern volatile int ftape_current_cylinder; /* track nr FDC thinks we're on */
extern volatile __u8 fdc_head; /* FDC head */
extern volatile __u8 fdc_cyl; /* FDC track */
@@ -231,15 +230,11 @@
extern int fdc_ready_wait(unsigned int timeout);
extern int fdc_command(const __u8 * cmd_data, int cmd_len);
extern int fdc_result(__u8 * res_data, int res_len);
-extern int fdc_issue_command(const __u8 * out_data, int out_count,
- __u8 * in_data, int in_count);
extern int fdc_interrupt_wait(unsigned int time);
-extern int fdc_set_seek_rate(int seek_rate);
extern int fdc_seek(int track);
extern int fdc_sense_drive_status(int *st3);
extern void fdc_motor(int motor);
extern void fdc_reset(void);
-extern int fdc_recalibrate(void);
extern void fdc_disable(void);
extern int fdc_fifo_threshold(__u8 threshold,
int *fifo_state, int *lock_state, int *fifo_thr);
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/fdc-io.c.old 2004-11-06 21:42:21.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/fdc-io.c 2004-11-06 22:02:43.000000000 +0100
@@ -50,7 +50,7 @@

/* Global vars.
*/
-int ftape_motor;
+static int ftape_motor;
volatile int ftape_current_cylinder = -1;
volatile fdc_mode_enum fdc_mode = fdc_idle;
fdc_config_info fdc;
@@ -86,6 +86,8 @@

static char ftape_id[] = "ftape"; /* used by request irq and free irq */

+static int fdc_set_seek_rate(int seek_rate);
+
void fdc_catch_stray_interrupts(int count)
{
unsigned long flags;
@@ -103,7 +105,7 @@
* If usecs == 0 then just test status, else wait at least for usecs.
* Returns -ETIME on timeout. Function must be calibrated first !
*/
-int fdc_wait(unsigned int usecs, __u8 mask, __u8 state)
+static int fdc_wait(unsigned int usecs, __u8 mask, __u8 state)
{
int count_1 = (fdc_calibr_count * usecs +
fdc_calibr_count - 1) / fdc_calibr_time;
@@ -129,18 +131,12 @@
fdc_wait(usecs, 0, 1); /* will always timeout ! */
}

-int fdc_ready_out_wait(unsigned int usecs)
+static int fdc_ready_out_wait(unsigned int usecs)
{
fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */
return fdc_wait(usecs, FDC_DATA_OUT_READY, FDC_DATA_OUT_READY);
}

-int fdc_ready_in_wait(unsigned int usecs)
-{
- fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */
- return fdc_wait(usecs, FDC_DATA_OUT_READY, FDC_DATA_IN_READY);
-}
-
void fdc_wait_calibrate(void)
{
ftape_calibrate("fdc_wait",
@@ -341,7 +337,7 @@
/* Handle command and result phases for
* commands without data phase.
*/
-int fdc_issue_command(const __u8 * out_data, int out_count,
+static int fdc_issue_command(const __u8 * out_data, int out_count,
__u8 * in_data, int in_count)
{
TRACE_FUN(ft_t_any);
@@ -497,7 +493,7 @@

/* Reprogram the 82078 registers to use Data Rate Table 1 on all drives.
*/
-void fdc_set_drive_specs(void)
+static void fdc_set_drive_specs(void)
{
__u8 cmd[] = { FDC_DRIVE_SPEC, 0x00, 0x00, 0x00, 0x00, 0xc0};
int result;
@@ -705,7 +701,7 @@

/* Specify FDC seek-rate (milliseconds)
*/
-int fdc_set_seek_rate(int seek_rate)
+static int fdc_set_seek_rate(int seek_rate)
{
/* set step rate, dma mode, and minimal head load and unload times
*/
@@ -803,49 +799,6 @@
TRACE_EXIT 0;
}

-/* Recalibrate and wait until home.
- */
-int fdc_recalibrate(void)
-{
- __u8 out[2];
- int st0;
- int pcn;
- int retry;
- int old_seek_rate = fdc_seek_rate;
- TRACE_FUN(ft_t_any);
-
- TRACE_CATCH(fdc_set_seek_rate(6),);
- out[0] = FDC_RECAL;
- out[1] = ft_drive_sel;
- ft_seek_completed = 0;
- TRACE_CATCH(fdc_command(out, 2),);
- /* Handle interrupts until ft_seek_completed or timeout.
- */
- for (retry = 0;; ++retry) {
- TRACE_CATCH(fdc_interrupt_wait(2 * FT_SECOND),);
- if (ft_seek_completed) {
- TRACE_CATCH(fdc_sense_interrupt_status(&st0, &pcn),);
- if ((st0 & ST0_SEEK_END) == 0) {
- if (retry < 1) {
- continue; /* some drives/fdc's
- * give an extra interrupt
- */
- } else {
- TRACE_ABORT(-EIO, ft_t_err,
- "no seek-end after seek completion !??");
- }
- }
- break;
- }
- }
- ftape_current_cylinder = pcn;
- if (pcn != 0) {
- TRACE(ft_t_err, "failed: resulting track = %d", pcn);
- }
- TRACE_CATCH(fdc_set_seek_rate(old_seek_rate),);
- TRACE_EXIT 0;
-}
-
static int perpend_mode; /* set if fdc is in perpendicular mode */

static int perpend_off(void)
@@ -1079,7 +1032,7 @@
*/
static __u8 fdc_save_state[2];

-int fdc_probe(void)
+static int fdc_probe(void)
{
__u8 cmd[1];
__u8 stat[16]; /* must be able to hold dumpregs & save results */
@@ -1308,7 +1261,7 @@
TRACE_EXIT IRQ_RETVAL(handled);
}

-int fdc_grab_irq_and_dma(void)
+static int fdc_grab_irq_and_dma(void)
{
TRACE_FUN(ft_t_any);

--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-bsm.h.old 2004-11-06 21:44:51.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-bsm.h 2004-11-06 21:44:58.000000000 +0100
@@ -60,7 +60,6 @@
extern void update_bad_sector_map(__u8 * buffer);
extern void ftape_extract_bad_sector_map(__u8 * buffer);
extern SectorMap ftape_get_bad_sector_entry(int segment_id);
-extern void ftape_put_bad_sector_entry(int segment_id, SectorMap mask);
extern __u8 *ftape_find_end_of_bsm_list(__u8 * address);
extern void ftape_init_bsm(void);

--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-bsm.c.old 2004-11-06 21:45:16.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-bsm.c 2004-11-06 22:01:52.000000000 +0100
@@ -47,6 +47,10 @@
} mode_type;

#if 0
+static void ftape_put_bad_sector_entry(int segment_id, SectorMap new_map);
+#endif
+
+#if 0
/* fix_tape converts a normal QIC-80 tape into a 'wide' tape.
* For testing purposes only !
*/
@@ -375,7 +379,8 @@
}
}

-void ftape_put_bad_sector_entry(int segment_id, SectorMap new_map)
+#if 0
+static void ftape_put_bad_sector_entry(int segment_id, SectorMap new_map)
{
SectorCount *ptr = (SectorCount *)bad_sector_map;
int count;
@@ -438,6 +443,7 @@
}
TRACE_EXIT;
}
+#endif /* 0 */

SectorMap ftape_get_bad_sector_entry(int segment_id)
{
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-ctl.h.old 2004-11-06 21:47:35.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-ctl.h 2004-11-06 21:48:11.000000000 +0100
@@ -158,6 +158,5 @@
unsigned int data_rate,
unsigned int tape_len);
extern int ftape_calibrate_data_rate(unsigned int qic_std);
-extern int ftape_init_drive(void);
extern const ftape_info *ftape_get_status(void);
#endif
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-ctl.c.old 2004-11-06 21:48:20.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-ctl.c 2004-11-06 21:49:27.000000000 +0100
@@ -113,11 +113,6 @@
#endif
}

-void ftape_set_status(const ftape_info *status)
-{
- ftape_status = *status;
-}
-
static int ftape_not_operational(int status)
{
/* return true if status indicates tape can not be used.
@@ -210,7 +205,7 @@
return i;
}

-void ftape_detach_drive(void)
+static void ftape_detach_drive(void)
{
TRACE_FUN(ft_t_any);

@@ -241,7 +236,7 @@
ft_history.rewinds = 0;
}

-int ftape_activate_drive(vendor_struct * drive_type)
+static int ftape_activate_drive(vendor_struct * drive_type)
{
int result = 0;
TRACE_FUN(ft_t_flow);
@@ -301,7 +296,7 @@
TRACE_EXIT result;
}

-int ftape_get_drive_status(void)
+static int ftape_get_drive_status(void)
{
int result;
int status;
@@ -374,7 +369,7 @@
TRACE_EXIT 0;
}

-void ftape_log_vendor_id(void)
+static void ftape_log_vendor_id(void)
{
int vendor_index;
TRACE_FUN(ft_t_flow);
@@ -580,7 +575,7 @@
TRACE_EXIT 0;
}

-int ftape_init_drive(void)
+static int ftape_init_drive(void)
{
int status;
qic_model model;
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-init.c.old 2004-11-06 21:50:37.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-init.c 2004-11-06 21:50:58.000000000 +0100
@@ -48,12 +48,6 @@
#include "../lowlevel/ftape-proc.h"
#include "../lowlevel/ftape-tracing.h"

-/* Global vars.
- */
-char ft_src[] __initdata = "$Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-init.c,v $";
-char ft_rev[] __initdata = "$Revision: 1.8 $";
-char ft_dat[] __initdata = "$Date: 1997/11/06 00:38:08 $";
-

#if defined(MODULE) && !defined(CONFIG_FT_NO_TRACE_AT_ALL)
static int ft_tracing = -1;
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-io.h.old 2004-11-06 21:51:28.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-io.h 2004-11-06 21:51:48.000000000 +0100
@@ -65,9 +65,6 @@
unsigned int timeout,
int *status);
extern int ftape_parameter(unsigned int parameter);
-extern int ftape_parameter_wait(unsigned int parameter,
- unsigned int timeout,
- int *status);
extern int ftape_report_operation(int *status,
qic117_cmd_t command,
int result_length);
@@ -80,7 +77,6 @@
extern int ftape_report_status(int *status);
extern int ftape_ready_wait(unsigned int timeout, int *status);
extern int ftape_seek_head_to_track(unsigned int track);
-extern int ftape_in_error_state(int status);
extern int ftape_set_data_rate(unsigned int new_rate, unsigned int qic_std);
extern int ftape_report_error(unsigned int *error,
qic117_cmd_t *command,
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-io.c.old 2004-11-06 21:51:57.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-io.c 2004-11-06 21:52:34.000000000 +0100
@@ -350,7 +350,7 @@
return result;
}

-int ftape_parameter_wait(unsigned int parm, unsigned int timeout, int *status)
+static int ftape_parameter_wait(unsigned int parm, unsigned int timeout, int *status)
{
int result;

@@ -503,16 +503,6 @@
TRACE_EXIT 0;
}

-int ftape_in_error_state(int status)
-{
- TRACE_FUN(ft_t_any);
-
- if ((status & QIC_STATUS_READY) && (status & QIC_STATUS_ERROR)) {
- TRACE_ABORT(1, ft_t_warn, "warning: error status set!");
- }
- TRACE_EXIT 0;
-}
-
int ftape_report_configuration(qic_model *model,
unsigned int *rate,
int *qic_std,
@@ -617,7 +607,7 @@
TRACE_EXIT (result < 0) ? -EIO : 0;
}

-int ftape_report_rom_version(int *version)
+static int ftape_report_rom_version(int *version)
{

if (ftape_report_operation(version, QIC_REPORT_ROM_VERSION, 8) < 0) {
@@ -627,16 +617,6 @@
}
}

-int ftape_report_signature(int *signature)
-{
- int result;
-
- result = ftape_command(28);
- result = ftape_report_operation(signature, 9, 8);
- result = ftape_command(30);
- return (result < 0) ? -EIO : 0;
-}
-
void ftape_report_vendor_id(unsigned int *id)
{
int result;
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-proc.c.old 2004-11-06 21:52:50.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-proc.c 2004-11-06 21:53:22.000000000 +0100
@@ -174,8 +174,8 @@
return len;
}

-int ftape_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int ftape_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
{
char *ptr = page;
size_t len;
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-rw.h.old 2004-11-06 21:53:40.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-rw.h 2004-11-06 21:53:51.000000000 +0100
@@ -101,7 +101,6 @@
extern buffer_struct *ftape_get_buffer (ft_buffer_queue_t pos);
extern int ftape_buffer_id (ft_buffer_queue_t pos);
extern void ftape_reset_buffer(void);
-extern int ftape_read_id(void);
extern void ftape_tape_parameters(__u8 drive_configuration);
extern int ftape_wait_segment(buffer_state_enum state);
extern int ftape_dumb_stop(void);
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-rw.c.old 2004-11-06 21:54:04.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/lowlevel/ftape-rw.c 2004-11-06 21:54:14.000000000 +0100
@@ -301,7 +301,7 @@

/* Read Id of first sector passing tape head.
*/
-int ftape_read_id(void)
+static int ftape_read_id(void)
{
int status;
__u8 out[2];
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-buffers.h.old 2004-11-06 21:54:29.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-buffers.h 2004-11-06 21:54:48.000000000 +0100
@@ -37,7 +37,6 @@
extern int zft_vmalloc_once(void *new, size_t size);
extern int zft_vcalloc_once(void *new, size_t size);
extern int zft_vmalloc_always(void *new, size_t size);
-extern int zft_vcalloc_always(void *new, size_t size);
extern void zft_vfree(void *old, size_t size);
extern void *zft_kmalloc(size_t size);
extern void zft_kfree(void *old, size_t size);
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-buffers.c.old 2004-11-06 21:54:57.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-buffers.c 2004-11-06 21:55:09.000000000 +0100
@@ -87,13 +87,6 @@
TRACE_ABORT(0, ft_t_noise,
"allocated buffer @ %p, %d bytes", *(void **)new, size);
}
-int zft_vcalloc_always(void *new, size_t size)
-{
- TRACE_FUN(ft_t_flow);
-
- zft_vfree(new, size);
- TRACE_EXIT zft_vcalloc_once(new, size);
-}
int zft_vmalloc_always(void *new, size_t size)
{
TRACE_FUN(ft_t_flow);
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape_syms.c.old 2004-11-06 21:55:50.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape_syms.c 2004-11-06 21:56:00.000000000 +0100
@@ -35,7 +35,6 @@

/* zftape-init.c */
EXPORT_SYMBOL(zft_cmpr_register);
-EXPORT_SYMBOL(zft_cmpr_unregister);
/* zftape-read.c */
EXPORT_SYMBOL(zft_fetch_segment_fraction);
/* zftape-buffers.c */
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-init.h.old 2004-11-06 21:56:21.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-init.h 2004-11-06 21:57:26.000000000 +0100
@@ -70,7 +70,6 @@
/* zftape-init.c defined global functions.
*/
extern int zft_cmpr_register(struct zft_cmpr_ops *new_ops);
-extern struct zft_cmpr_ops *zft_cmpr_unregister(void);
extern int zft_cmpr_lock(int try_to_load);

#endif
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-init.c.old 2004-11-06 21:57:33.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-init.c 2004-11-06 21:58:02.000000000 +0100
@@ -46,10 +46,6 @@
#include "../zftape/zftape-ctl.h"
#include "../zftape/zftape-buffers.h"

-char zft_src[] __initdata = "$Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-init.c,v $";
-char zft_rev[] __initdata = "$Revision: 1.8 $";
-char zft_dat[] __initdata = "$Date: 1997/11/06 00:48:56 $";
-
MODULE_AUTHOR("(c) 1996, 1997 Claus-Justus Heine "
"(claus@xxxxxxxxxxxxxxxxxxxxxxxx)");
MODULE_DESCRIPTION(ZFTAPE_VERSION " - "
@@ -278,15 +274,6 @@
}
}

-struct zft_cmpr_ops *zft_cmpr_unregister(void)
-{
- struct zft_cmpr_ops *old_ops = zft_cmpr_ops;
- TRACE_FUN(ft_t_flow);
-
- zft_cmpr_ops = NULL;
- TRACE_EXIT old_ops;
-}
-
/* lock the zft-compressor() module.
*/
int zft_cmpr_lock(int try_to_load)
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-rw.h.old 2004-11-06 21:58:16.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-rw.h 2004-11-06 21:58:29.000000000 +0100
@@ -79,7 +79,6 @@
extern int zft_deblock_segment;
extern zft_status_enum zft_io_state;
extern int zft_header_changed;
-extern int zft_bad_sector_map_changed;
extern int zft_qic113; /* conform to old specs. and old zftape */
extern int zft_use_compression;
extern unsigned int zft_blk_sz;
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-rw.c.old 2004-11-06 21:58:36.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-rw.c 2004-11-06 21:58:44.000000000 +0100
@@ -45,7 +45,6 @@
int zft_deblock_segment = -1;
zft_status_enum zft_io_state = zft_idle;
int zft_header_changed;
-int zft_bad_sector_map_changed;
int zft_qic113; /* conform to old specs. and old zftape */
int zft_use_compression;
zft_position zft_pos = {
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-vtbl.h.old 2004-11-06 21:59:14.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-vtbl.h 2004-11-06 21:59:20.000000000 +0100
@@ -152,7 +152,6 @@
/* exported functions */
extern void zft_init_vtbl (void);
extern void zft_free_vtbl (void);
-extern void zft_new_vtbl_entry (void);
extern int zft_extract_volume_headers(__u8 *buffer);
extern int zft_update_volume_table (unsigned int segment);
extern int zft_open_volume (zft_position *pos,
--- linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-vtbl.c.old 2004-11-06 21:59:29.000000000 +0100
+++ linux-2.6.10-rc1-mm3-full/drivers/char/ftape/zftape/zftape-vtbl.c 2004-11-06 21:59:59.000000000 +0100
@@ -62,7 +62,7 @@
static zft_volinfo eot_vtbl;
static zft_volinfo *cur_vtbl;

-inline void zft_new_vtbl_entry(void)
+static inline void zft_new_vtbl_entry(void)
{
struct list_head *tmp = &zft_last_vtbl->node;
zft_volinfo *new = zft_kmalloc(sizeof(zft_volinfo));
@@ -248,7 +248,7 @@
* that buffer already contains the old volume-table, so that vtbl
* entries without the zft_volume flag set can savely be ignored.
*/
-void zft_create_volume_headers(__u8 *buffer)
+static void zft_create_volume_headers(__u8 *buffer)
{
__u8 *entry;
struct list_head *tmp;

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

----- End forwarded message -----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/