Re: system slow since ~ 2.6.7

[Len Brown]

On Wed, 2004-11-17 at 19:25, Guennadi Liakhovetski wrote:
> "Slow" means just running top alone in a vt it takes 1.6% CPU. Under
> 2.6.3 it takes 0.2% (Duron 900MHz). Another peculiarity with 2.6.7 and
> 2.6.9 is that the power LED is blinking with about 1Hz frequency. It's
> an ASUS A7VI-VM motherboard. In the manual there's nothing about
> error-codes. I played with various APIC settings - no change. Related
> or not - if running with LAPIC enabled (2.6.7), I get quite a few ERR
> in /proc/interrupts.

PCI: Disabling Via external APIC routing

Curiously, this line appears in 2.6.3, but not in 2.6.7 or 2.6.9 dmesg
-- even though all the configs build in IOAPIC support.

Can you forward the /proc/interrupts from 2.6.3, and from 2.6.9 with and
without acpi=off?  do you see a significant change in /proc/interrupts
before and after the sensor-provoked slowness starts?

if you build 2.6.9 w/o the CONFIG_ACPI_PROCESSOR and boot w/o cmdline
params, do you still see slowness?

if you boot 2.6.9 with these parameters, do you see any additional dmesg
lines?

acpi_dbg_level=0xF acpi_dbg_layer=0xFFFF3FFF


thanks,
-Len


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/