Re: [IDE] Need assistance on a Silicon Image 680-based board

[Alan Cox]

On Sul, 2004-11-28 at 15:09, Eric Brundick wrote:
> Apparently the manufacturer used 0095 for the vendor ID, rather than 1095 as is listed for Silicon Image in
> drivers/pci/pci.ids.  Hoping that's all it is, I modified drivers/pci/pci.ids and changed the PCI ID for
> Silicon Image/CMD to 0095, and did the same in include/linux/pci_ids.h.
> Rebuilt the kernel, building siimage as a module (siimage.ko)
> 

Remove the card, clean the connectors, reinsert the card. If that fails
try a different slot, if that fails replace the card. You are losing
bits in hardware somewhere.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/