[PATCH 3/8] Kconfig: cleanup cpufreq menu

From: Roman Zippel
Date: Sat Jan 29 2005 - 17:27:38 EST

Next message: Roman Zippel: "[PATCH 8/8] Kconfig: cleanup USB menu"
Previous message: Roman Zippel: "[PATCH 4/8] Kconfig: cleanup kernel hacking menu"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This properly indents the cpufreq menu.
Remove CPU_FREQ_TABLE as visible option and use select instead.

Signed-off-by: Roman Zippel <zippel@xxxxxxxxxxxxxx>

---

arch/i386/kernel/cpu/cpufreq/Kconfig | 54 +++++++++++++++--------------------
drivers/cpufreq/Kconfig | 20 ++++++------
2 files changed, 34 insertions(+), 40 deletions(-)

Index: linux-2.6.11/arch/i386/kernel/cpu/cpufreq/Kconfig
===================================================================
--- linux-2.6.11.orig/arch/i386/kernel/cpu/cpufreq/Kconfig 2005-01-29 22:50:43.507928466 +0100
+++ linux-2.6.11/arch/i386/kernel/cpu/cpufreq/Kconfig 2005-01-29 22:55:57.343872448 +0100
@@ -6,22 +6,14 @@ menu "CPU Frequency scaling"

source "drivers/cpufreq/Kconfig"

-config CPU_FREQ_TABLE
- tristate "CPU frequency table helpers"
- depends on CPU_FREQ
- default y
- help
- Many CPUFreq drivers use these helpers, so only say N here if
- the CPUFreq driver of your choice doesn't need these helpers.
-
- If in doubt, say Y.
+if CPU_FREQ

comment "CPUFreq processor drivers"
- depends on CPU_FREQ

config X86_ACPI_CPUFREQ
tristate "ACPI Processor P-States driver"
- depends on CPU_FREQ_TABLE && ACPI_PROCESSOR
+ select CPU_FREQ_TABLE
+ depends on ACPI_PROCESSOR
help
This driver adds a CPUFreq driver which utilizes the ACPI
Processor Performance States.
@@ -32,7 +24,8 @@ config X86_ACPI_CPUFREQ

config ELAN_CPUFREQ
tristate "AMD Elan"
- depends on CPU_FREQ_TABLE && X86_ELAN
+ select CPU_FREQ_TABLE
+ depends on X86_ELAN
---help---
This adds the CPUFreq driver for AMD Elan SC400 and SC410
processors.
@@ -47,7 +40,7 @@ config ELAN_CPUFREQ

config X86_POWERNOW_K6
tristate "AMD Mobile K6-2/K6-3 PowerNow!"
- depends on CPU_FREQ_TABLE
+ select CPU_FREQ_TABLE
help
This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
AMD K6-3+ processors.
@@ -58,7 +51,7 @@ config X86_POWERNOW_K6

config X86_POWERNOW_K7
tristate "AMD Mobile Athlon/Duron PowerNow!"
- depends on CPU_FREQ_TABLE
+ select CPU_FREQ_TABLE
help
This adds the CPUFreq driver for mobile AMD K7 mobile processors.

@@ -68,12 +61,14 @@ config X86_POWERNOW_K7

config X86_POWERNOW_K7_ACPI
bool
- depends on ((X86_POWERNOW_K7 = "m" && ACPI_PROCESSOR) || (X86_POWERNOW_K7 = "y" && ACPI_PROCESSOR = "y"))
+ depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
+ depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
default y

config X86_POWERNOW_K8
tristate "AMD Opteron/Athlon64 PowerNow!"
- depends on CPU_FREQ_TABLE && EXPERIMENTAL
+ select CPU_FREQ_TABLE
+ depends on EXPERIMENTAL
help
This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.

@@ -83,12 +78,12 @@ config X86_POWERNOW_K8

config X86_POWERNOW_K8_ACPI
bool
- depends on ((X86_POWERNOW_K8 = "m" && ACPI_PROCESSOR) || (X86_POWERNOW_K8 = "y" && ACPI_PROCESSOR = "y"))
+ depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
+ depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
default y

config X86_GX_SUSPMOD
tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
- depends on CPU_FREQ
help
This add the CPUFreq driver for NatSemi Geode processors which
support suspend modulation.
@@ -99,7 +94,7 @@ config X86_GX_SUSPMOD

config X86_SPEEDSTEP_CENTRINO
tristate "Intel Enhanced SpeedStep"
- depends on CPU_FREQ_TABLE
+ select CPU_FREQ_TABLE
select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI)
help
This adds the CPUFreq driver for Enhanced SpeedStep enabled
@@ -114,8 +109,8 @@ config X86_SPEEDSTEP_CENTRINO

config X86_SPEEDSTEP_CENTRINO_ACPI
bool "Use ACPI tables to decode valid frequency/voltage pairs"
- depends on X86_SPEEDSTEP_CENTRINO
- depends on ((X86_SPEEDSTEP_CENTRINO = "m" && ACPI_PROCESSOR) || (X86_SPEEDSTEP_CENTRINO = "y" && ACPI_PROCESSOR = "y"))
+ depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
+ depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
default y
help
Use primarily the information provided in the BIOS ACPI tables
@@ -136,7 +131,7 @@ config X86_SPEEDSTEP_CENTRINO_TABLE

config X86_SPEEDSTEP_ICH
tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
- depends on CPU_FREQ_TABLE
+ select CPU_FREQ_TABLE
help
This adds the CPUFreq driver for certain mobile Intel Pentium III
(Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
@@ -149,7 +144,8 @@ config X86_SPEEDSTEP_ICH

config X86_SPEEDSTEP_SMI
tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
- depends on CPU_FREQ_TABLE && EXPERIMENTAL
+ select CPU_FREQ_TABLE
+ depends on EXPERIMENTAL
help
This adds the CPUFreq driver for certain mobile Intel Pentium III
(Coppermine), all mobile Intel Pentium III-M (Tualatin)
@@ -161,7 +157,7 @@ config X86_SPEEDSTEP_SMI

config X86_P4_CLOCKMOD
tristate "Intel Pentium 4 clock modulation"
- depends on CPU_FREQ_TABLE
+ select CPU_FREQ_TABLE
help
This adds the CPUFreq driver for Intel Pentium 4 / XEON
processors.
@@ -172,7 +168,7 @@ config X86_P4_CLOCKMOD

config X86_CPUFREQ_NFORCE2
tristate "nVidia nForce2 FSB changing"
- depends on CPU_FREQ && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
This adds the CPUFreq driver for FSB changing on nVidia nForce2
platforms.
@@ -183,7 +179,6 @@ config X86_CPUFREQ_NFORCE2

config X86_LONGRUN
tristate "Transmeta LongRun"
- depends on CPU_FREQ
help
This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
which support LongRun.
@@ -194,7 +189,7 @@ config X86_LONGRUN

config X86_LONGHAUL
tristate "VIA Cyrix III Longhaul"
- depends on CPU_FREQ_TABLE
+ select CPU_FREQ_TABLE
help
This adds the CPUFreq driver for VIA Samuel/CyrixIII,
VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
@@ -205,7 +200,6 @@ config X86_LONGHAUL
If in doubt, say N.

comment "shared options"
- depends on CPU_FREQ

config X86_ACPI_CPUFREQ_PROC_INTF
bool "/proc/acpi/processor/../performance interface (deprecated)"
@@ -220,8 +214,7 @@ config X86_ACPI_CPUFREQ_PROC_INTF

config X86_SPEEDSTEP_LIB
tristate
- depends on (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
- default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
+ default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD

config X86_SPEEDSTEP_RELAXED_CAP_CHECK
bool "Relaxed speedstep capability checks"
@@ -233,5 +226,6 @@ config X86_SPEEDSTEP_RELAXED_CAP_CHECK
option lets the probing code bypass some of those checks if the
parameter "relaxed_check=1" is passed to the module.

+endif # CPU_FREQ

endmenu
Index: linux-2.6.11/drivers/cpufreq/Kconfig
===================================================================
--- linux-2.6.11.orig/drivers/cpufreq/Kconfig 2005-01-29 22:50:43.507928466 +0100
+++ linux-2.6.11/drivers/cpufreq/Kconfig 2005-01-29 22:55:57.343872448 +0100
@@ -13,9 +13,13 @@ config CPU_FREQ

If in doubt, say N.

+if CPU_FREQ
+
+config CPU_FREQ_TABLE
+ def_tristate m
+
config CPU_FREQ_DEBUG
bool "Enable CPUfreq debugging"
- depends on CPU_FREQ
help
Say Y here to enable CPUfreq subsystem (including drivers)
debugging. You will need to activate it via the kernel
@@ -29,7 +33,7 @@ config CPU_FREQ_DEBUG

config CPU_FREQ_STAT
tristate "CPU frequency translation statistics"
- depends on CPU_FREQ && CPU_FREQ_TABLE
+ select CPU_FREQ_TABLE
default y
help
This driver exports CPU frequency statistics information through sysfs
@@ -37,17 +41,15 @@ config CPU_FREQ_STAT

config CPU_FREQ_STAT_DETAILS
bool "CPU frequency translation statistics details"
- depends on CPU_FREQ && CPU_FREQ_STAT
- default n
+ depends on CPU_FREQ_STAT
help
This will show detail CPU frequency translation table in sysfs file
system

choice
prompt "Default CPUFreq governor"
- depends on CPU_FREQ
- default CPU_FREQ_DEFAULT_GOV_PERFORMANCE if !CPU_FREQ_SA1100 && !CPU_FREQ_SA1110
default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110
+ default CPU_FREQ_DEFAULT_GOV_PERFORMANCE
help
This option sets which CPUFreq governor shall be loaded at
startup. If in doubt, select 'performance'.
@@ -73,7 +75,6 @@ endchoice

config CPU_FREQ_GOV_PERFORMANCE
tristate "'performance' governor"
- depends on CPU_FREQ
help
This cpufreq governor sets the frequency statically to the
highest available CPU frequency.
@@ -82,7 +83,6 @@ config CPU_FREQ_GOV_PERFORMANCE

config CPU_FREQ_GOV_POWERSAVE
tristate "'powersave' governor"
- depends on CPU_FREQ
help
This cpufreq governor sets the frequency statically to the
lowest available CPU frequency.
@@ -91,7 +91,6 @@ config CPU_FREQ_GOV_POWERSAVE

config CPU_FREQ_GOV_USERSPACE
tristate "'userspace' governor for userspace frequency scaling"
- depends on CPU_FREQ
help
Enable this cpufreq governor when you either want to set the
CPU frequency manually or when an userspace program shall
@@ -104,7 +103,6 @@ config CPU_FREQ_GOV_USERSPACE

config CPU_FREQ_GOV_ONDEMAND
tristate "'ondemand' cpufreq policy governor"
- depends on CPU_FREQ
help
'ondemand' - This driver adds a dynamic cpufreq policy governor.
The governor does a periodic polling and
@@ -116,3 +114,5 @@ config CPU_FREQ_GOV_ONDEMAND
For details, take a look at linux/Documentation/cpu-freq.

If in doubt, say N.
+
+endif # CPU_FREQ
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Roman Zippel: "[PATCH 8/8] Kconfig: cleanup USB menu"
Previous message: Roman Zippel: "[PATCH 4/8] Kconfig: cleanup kernel hacking menu"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]