Re: [WATCHDOG] support of motherboards with ICH6]

[Pasi Kärkkäinen]

On Mon, Feb 07, 2005 at 02:48:49PM +0000, P@xxxxxxxxxxxxxx wrote:
> Pasi Kärkkäinen wrote:
> >On Mon, Feb 07, 2005 at 10:00:03AM +0100, P.O. Gaillard wrote:
> >
> >>Hi,
> >>
> >>I am replying to myself so that people googling for similar problems can 
> >>find the answer.
> >>
> >>Supermicro says that the internal driver of the southbridge (and also the 
> >>W83627HF chip) are not useable because the necessary support hardware is 
> >>missing. They say that the P8SCi board has a working watchdog.
> >>
> >>	hope this can help somebody someday,
> >>
> >>	P.O. Gaillard
> >>
> >
> >
> >Hi!
> >
> >I have P8SCi motherboard, and I just tried the watchdog with Linux 2.6.10.
> >
> >I loaded w83627hf_wdt driver, and the watchdog was detected:
> >
> >WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.
> >w83627hf WDT: initialized. timeout=60 sec (nowayout=0)
> 
> Note there is no detection. It just writes to a particular IO port
> (2E by default).
> 
> >But it is not working. I tried setting the timeout to 1 minute, and to
> >8 minute in the BIOS, but the machine reboots after the delay no matter 
> >what
> >the delay is.. the watchdog driver is loaded before the timeout of course.
> >
> >For some reason, the driver is not working.
> >
> >I mailed supermicro support about this, and they told me one of their
> >customers is using watchdog with Debian 2.6.10 kernel. 
> >So it should work, but..
> 
> You need to ask them what watchdog they use exactly.
> I've seen motherboards that have w83637hf chips but
> actually wire the intel watchdog up so you need the i8xx_tco driver
> 
> If they are using the w83726hf chip you need to ask
> what IO port they're using.
> 

Hi!

http://nrg.joroinen.fi/watchdog_function_project_description_P4SGL.doc

That is the document I got from supermicro.. it has the io ports / registers
they're using and also watchdog example in assembly.

It seems that they're using 0x2E..

-- Pasi Kärkkäinen
       
                                   ^
                                .     .
                                 Linux
                              /    -    \
                             Choice.of.the
                           .Next.Generation.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/