Re: IO port conflict between timer & watchdog on PCISA-C800EV board?

[Ondrej Zary]

Randy.Dunlap wrote:
[...]
> /proc/ioports timer assignments have now been split up like this:
> 0040-0043 : timer0
> 0050-0053 : timer1
>
> However, port 0x43 is still assigned to timer0, so your request_region
> call will still fail.  What system board timer resource assignments
> should be used for that VIA chipset?  If the chipset timer only needs
> 0x40-0x42, e.g., leaving 0x43 available, then it would be possible
> to do some kind of workaround (maybe not real clean, but possible).

The timer uses ports 0x40-0x43. However, port 0x43 is defined as WO 
(write-only) - it's timer command register.

--
Ondrej Zary
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/