USB Storage problem (usb hangs)

From: me
Date: Sun Feb 20 2005 - 12:35:45 EST


Hi.

The device is: USB2.0 to IDE 3.5" hard disk enclosure.
Producer: Seven.

Part of /var/log/messages with USB debug enabled in kernel is
attached to this email.

Kernel: 2.6.9, 2.6.10 (i cant remember from which one is attached log).
Distribution: Gentoo.

I'm not subscribed to the list, pleas CC me.

--
Regards
Sebastian Fabrycki
cellsan@xxxxxxxxxx

------------------------------------------------------------------
Sprawdz NOWE parametry hostingu!
>> http://link.interia.pl/f1857 <<
Jan 10 23:34:30 globtel usb-storage: USB Mass Storage device detected
Jan 10 23:34:30 globtel usb-storage: -- associate_dev
Jan 10 23:34:30 globtel usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0002
Jan 10 23:34:30 globtel usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Jan 10 23:34:30 globtel usb-storage: Vendor: Genesys Logic, Product: USB TO IDE
Jan 10 23:34:30 globtel usb-storage: Transport: Bulk
Jan 10 23:34:30 globtel usb-storage: Protocol: Transparent SCSI
Jan 10 23:34:30 globtel usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Jan 10 23:34:30 globtel usb-storage: GetMaxLUN command result is 1, data is 0
Jan 10 23:34:30 globtel usb-storage: *** thread sleeping.
Jan 10 23:34:30 globtel scsi0 : SCSI emulation for USB Mass Storage devices
Jan 10 23:34:30 globtel usb-storage: queuecommand called
Jan 10 23:34:30 globtel usb-storage: *** thread awakened.
Jan 10 23:34:30 globtel usb-storage: Faking INQUIRY command
Jan 10 23:34:30 globtel usb-storage: scsi cmd done, result=0x0
Jan 10 23:34:30 globtel usb-storage: *** thread sleeping.
Jan 10 23:34:30 globtel Vendor: Genesys Model: USB to IDE Disk Rev: 0002
Jan 10 23:34:30 globtel Type: Direct-Access ANSI SCSI revision: 02
Jan 10 23:34:30 globtel usb-storage: queuecommand called
Jan 10 23:34:30 globtel usb-storage: *** thread awakened.
Jan 10 23:34:30 globtel usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 10 23:34:30 globtel usb-storage: 00 00 00 00 00 00
Jan 10 23:34:30 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 10 23:34:30 globtel usb-storage: Status code 0; transferred 31/31
Jan 10 23:34:30 globtel usb-storage: -- transfer complete
Jan 10 23:34:30 globtel usb-storage: Bulk command transfer result=0
Jan 10 23:34:30 globtel usb-storage: Attempting to get CSW...
Jan 10 23:34:30 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 10 23:34:40 globtel scsi.agent[7459]: Attribute /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host0/0:0:0:0/type does not exist
Jan 10 23:35:00 globtel usb-storage: command_abort called
Jan 10 23:35:00 globtel usb-storage: usb_stor_stop_transport called
Jan 10 23:35:00 globtel usb-storage: -- cancelling URB
Jan 10 23:35:00 globtel usb-storage: Status code -104; transferred 0/13
Jan 10 23:35:00 globtel usb-storage: -- transfer cancelled
Jan 10 23:35:00 globtel usb-storage: Bulk status result = 4
Jan 10 23:35:00 globtel usb-storage: -- command was aborted
Jan 10 23:35:00 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:00 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:35:20 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:35:20 globtel usb-storage: Soft reset failed: -104
Jan 10 23:35:20 globtel usb-storage: scsi command aborted
Jan 10 23:35:20 globtel usb-storage: *** thread sleeping.
Jan 10 23:35:20 globtel usb-storage: queuecommand called
Jan 10 23:35:20 globtel usb-storage: *** thread awakened.
Jan 10 23:35:20 globtel usb-storage: Command TEST_UNIT_READY (6 bytes)
Jan 10 23:35:20 globtel usb-storage: 00 00 00 00 00 00
Jan 10 23:35:20 globtel usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jan 10 23:35:20 globtel usb-storage: Status code 0; transferred 31/31
Jan 10 23:35:20 globtel usb-storage: -- transfer complete
Jan 10 23:35:20 globtel usb-storage: Bulk command transfer result=0
Jan 10 23:35:20 globtel usb-storage: Attempting to get CSW...
Jan 10 23:35:20 globtel usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Jan 10 23:35:30 globtel usb-storage: command_abort called
Jan 10 23:35:30 globtel usb-storage: usb_stor_stop_transport called
Jan 10 23:35:30 globtel usb-storage: -- cancelling URB
Jan 10 23:35:30 globtel usb-storage: Status code -104; transferred 0/13
Jan 10 23:35:30 globtel usb-storage: -- transfer cancelled
Jan 10 23:35:30 globtel usb-storage: Bulk status result = 4
Jan 10 23:35:30 globtel usb-storage: -- command was aborted
Jan 10 23:35:30 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:30 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:35:50 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:35:50 globtel usb-storage: Soft reset failed: -104
Jan 10 23:35:50 globtel usb-storage: scsi command aborted
Jan 10 23:35:50 globtel usb-storage: *** thread sleeping.
Jan 10 23:35:50 globtel usb-storage: device_reset called
Jan 10 23:35:50 globtel usb-storage: usb_stor_Bulk_reset called
Jan 10 23:35:50 globtel usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jan 10 23:36:10 globtel usb-storage: Timeout -- cancelling URB
Jan 10 23:36:10 globtel usb-storage: Soft reset failed: -104
Jan 10 23:36:10 globtel usb-storage: bus_reset called
...
...