Re: [ patch 6/7] drivers/serial/jsm: new serial device driver
From: Jeff Garzik
Date: Sun Feb 27 2005 - 19:53:16 EST
Wen Xiong wrote:
+struct rw_t {
+ unsigned char rw_req; /* Request type */
+ unsigned char rw_board; /* Host Adapter board number */
+ unsigned char rw_conc; /* Concentrator number */
+ unsigned char rw_reserved; /* Reserved for expansion */
+ unsigned int rw_addr; /* Address in concentrator */
+ unsigned short rw_size; /* Read/write request length */
+ unsigned char rw_data[128]; /* Data to read/write */
+};
Invalid naming. Linux kernel style is "struct foo" not "foo_t" nor
"struct foo_t".
Also, "rw_t" is too short and ambiguous.
+
+/***********************************************************************
+ * Shrink Buffer and Board Information definitions and structures.
+
+ ************************************************************************/
+ /* Board type return codes */
+#define PCXI_TYPE 1 /* Board type at the designated port is a PC/Xi */
+#define PCXM_TYPE 2 /* Board type at the designated port is a PC/Xm */
+#define PCXE_TYPE 3 /* Board type at the designated port is a PC/Xe */
+#define MCXI_TYPE 4 /* Board type at the designated port is a MC/Xi */
+#define COMXI_TYPE 5 /* Board type at the designated port is a COM/Xi */
+
+ /* Non-Zero Result codes. */
+#define RESULT_NOBDFND 1 /* A Digi product at that port is not config installed */
+#define RESULT_NODESCT 2 /* A memory descriptor was not obtainable */
+#define RESULT_NOOSSIG 3 /* FEP/OS signature was not detected on the board */
+#define RESULT_TOOSML 4 /* Too small an area to shrink. */
+#define RESULT_NOCHAN 5 /* Channel structure for the board was not found */
+
+struct shrink_buf_struct {
+ unsigned int shrink_buf_vaddr; /* Virtual address of board */
+ unsigned int shrink_buf_phys; /* Physical address of board */
Major bug. These should be unsigned long.
+ unsigned int shrink_buf_bseg; /* Amount of board memory */
+ unsigned int shrink_buf_hseg; /* '186 Begining of Dual-Port */
+
+ unsigned int shrink_buf_lseg; /* '186 Begining of freed memory */
+ unsigned int shrink_buf_mseg; /* Linear address from start of
+ dual-port were freed memory
+ begins, host viewpoint. */
+
+ unsigned int shrink_buf_bdparam; /* Parameter for xxmemon and
+ xxmemoff */
+
+ unsigned int shrink_buf_reserva; /* Reserved */
+ unsigned int shrink_buf_reservb; /* Reserved */
+ unsigned int shrink_buf_reservc; /* Reserved */
+ unsigned int shrink_buf_reservd; /* Reserved */
why do these exist?
+ unsigned char shrink_buf_result; /* Reason for call failing
+ Zero is Good return */
+ unsigned char shrink_buf_init; /* Non-Zero if it caused an
+ xxinit call. */
+
+ unsigned char shrink_buf_anports; /* Number of async ports */
+ unsigned char shrink_buf_snports; /* Number of sync ports */
+ unsigned char shrink_buf_type; /* Board type 1 = PC/Xi,
+ 2 = PC/Xm,
+ 3 = PC/Xe
+ 4 = MC/Xi
+ 5 = COMX/i */
+ unsigned char shrink_buf_card; /* Card number */
+
+};
+
+/************************************************************************
+ * Structure to get driver status information
+ ************************************************************************/
+struct digi_dinfo {
+ unsigned int dinfo_nboards; /* # boards configured */
+ char dinfo_reserved[12]; /* for future expansion */
+ char dinfo_version[16]; /* driver version */
+};
+
+#define DIGI_GETDD ('d'<<8) | 248 /* get driver info */
+
+/************************************************************************
+ * Structure used with ioctl commands for per-board information
+ *
+ * physsize and memsize differ when board has "windowed" memory
+ ************************************************************************/
+struct digi_info {
+ unsigned int info_bdnum; /* Board number (0 based) */
+ unsigned int info_ioport; /* io port address */
+ unsigned int info_physaddr; /* memory address */
+ unsigned int info_physsize; /* Size of host mem window */
+ unsigned int info_memsize; /* Amount of dual-port mem */
+ /* on board */
Major bugs. Use unsigned long for addresses.
Use "void __iomem *" for ioremap'd addresses.
+
+/*
+ * Driver identification, error and debugging statments
+ *
+ * In theory, you can change all occurances of "digi" in the next
+ * three lines, and the driver printk's will all automagically change.
+ *
+ * APR((fmt, args, ...)); Always prints message
+ * DPR((fmt, args, ...)); Only prints if JSM_TRACER is defined at
+ * compile time and jsm_debug!=0
+ *
+ * TRC_TO_CONSOLE:
+ * Setting this to 1 will turn on some general function tracing
+ * resulting in a bunch of extra debugging printks to the console
+ *
+ */
+
+#define PROCSTR "jsm" /* /proc entries */
+#define DEVSTR "/dev/dg/jsm" /* /dev entries */
Never store pathnames in a kernel driver.
+#define DRVSTR "jsm" /* Driver name string
+ * displayed by APR */
+#define APR(args) do {printk(DRVSTR": "); printk args;} while (0)
+
+#define TRC_TO_CONSOLE 1
+
+/*
+ * Debugging levels can be set using debug insmod variable
+ * They can also be compiled out completely.
+ */
+
+#define DBG_INIT (jsm_debug & 0x01)
+#define DBG_BASIC (jsm_debug & 0x02)
+#define DBG_CORE (jsm_debug & 0x04)
+
+#define DBG_OPEN (jsm_debug & 0x08)
+#define DBG_CLOSE (jsm_debug & 0x10)
+#define DBG_READ (jsm_debug & 0x20)
+#define DBG_WRITE (jsm_debug & 0x40)
+
+#define DBG_IOCTL (jsm_debug & 0x80)
+
+#define DBG_PROC (jsm_debug & 0x100)
+#define DBG_PARAM (jsm_debug & 0x200)
+#define DBG_PSCAN (jsm_debug & 0x400)
+#define DBG_EVENT (jsm_debug & 0x800)
+
+#define DBG_DRAIN (jsm_debug & 0x1000)
+#define DBG_MSIGS (jsm_debug & 0x2000)
+
+#define DBG_MGMT (jsm_debug & 0x4000)
+#define DBG_INTR (jsm_debug & 0x8000)
+
+#define DBG_CARR (jsm_debug & 0x10000)
+
+#if TRC_TO_CONSOLE
+#define PRINTF_TO_CONSOLE(args) { printk(DRVSTR": "); printk args; }
+#else //!defined TRACE_TO_CONSOLE
+#define PRINTF_TO_CONSOLE(args)
+#endif
+
+#define TRC(args) { PRINTF_TO_CONSOLE(args) }
+
+#define DPR_INIT(ARGS) if (DBG_INIT) TRC(ARGS)
+#define DPR_BASIC(ARGS) if (DBG_BASIC) TRC(ARGS)
+#define DPR_CORE(ARGS) if (DBG_CORE) TRC(ARGS)
+#define DPR_OPEN(ARGS) if (DBG_OPEN) TRC(ARGS)
+#define DPR_CLOSE(ARGS) if (DBG_CLOSE) TRC(ARGS)
+#define DPR_READ(ARGS) if (DBG_READ) TRC(ARGS)
+#define DPR_WRITE(ARGS) if (DBG_WRITE) TRC(ARGS)
+#define DPR_IOCTL(ARGS) if (DBG_IOCTL) TRC(ARGS)
+#define DPR_PROC(ARGS) if (DBG_PROC) TRC(ARGS)
+#define DPR_PARAM(ARGS) if (DBG_PARAM) TRC(ARGS)
+#define DPR_PSCAN(ARGS) if (DBG_PSCAN) TRC(ARGS)
+#define DPR_EVENT(ARGS) if (DBG_EVENT) TRC(ARGS)
+#define DPR_DRAIN(ARGS) if (DBG_DRAIN) TRC(ARGS)
+#define DPR_CARR(ARGS) if (DBG_CARR) TRC(ARGS)
+#define DPR_MGMT(ARGS) if (DBG_MGMT) TRC(ARGS)
+#define DPR_INTR(ARGS) if (DBG_INTR) TRC(ARGS)
+#define DPR_MSIGS(ARGS) if (DBG_MSIGS) TRC(ARGS)
+#define DPR(ARGS) if (jsm_debug) TRC(ARGS)
encapsulate in "do { ... } while (0)"
+
+/* Number of boards we support at once. */
+#define MAXBOARDS 20
+#define MAXPORTS 8
+#define MAXTTYNAMELEN 200
+
+/* Our 3 magic numbers for our board, channel and unit structs */
+#define JSM_BOARD_MAGIC 0x5c6df104
+#define JSM_CHANNEL_MAGIC 0x6c6df104
+#define JSM_UNIT_MAGIC 0x7c6df104
+
+/* Serial port types */
+#define JSM_SERIAL 0
+
+#define SERIAL_TYPE_NORMAL 1
+
+#define PORT_NUM(dev) ((dev) & 0x7f)
+#define IS_PRINT(dev) (((dev) & 0xff) >= 0x80)
+
+/* MAX number of stop characters we will send when our read queue is getting full */
+#define MAX_STOPS_SENT 5
+
+/* 4 extra for alignment play space */
+#define WRITEBUFLEN ((4096) + 4)
+#define MYFLIPLEN N_TTY_BUF_SIZE
+
+#define jsm_jiffies_from_ms(a) (((a) * HZ) / 1000)
+
+/*
+ * Define a local default termios struct. All ports will be created
+ * with this termios initially. This is the same structure that is defined
+ * as the default in tty_io.c with the same settings overriden as in serial.c
+ *
+ * In short, this should match the internal serial ports' defaults.
+ */
+#define DEFAULT_IFLAGS (ICRNL | IXON)
+#define DEFAULT_OFLAGS (OPOST | ONLCR)
+#define DEFAULT_CFLAGS (B9600 | CS8 | CREAD | HUPCL | CLOCAL)
+#define DEFAULT_LFLAGS (ISIG | ICANON | ECHO | ECHOE | ECHOK | \
+ ECHOCTL | ECHOKE | IEXTEN)
+
+#ifndef _POSIX_VDISABLE
+#define _POSIX_VDISABLE '\0'
+#endif
+
+#define SNIFF_MAX 65536 /* Sniff buffer size (2^n) */
+#define SNIFF_MASK (SNIFF_MAX - 1) /* Sniff wrap mask */
+
+/*
+ * All the possible states the driver can be while being loaded.
+ */
+enum {
+ DRIVER_INITIALIZED = 0,
+ DRIVER_READY
+};
+
+/*
+ * All the possible states the board can be while booting up.
+ */
+enum {
+ BOARD_FAILED = 0,
+ BOARD_FOUND,
+ BOARD_READY
+};
+
+
+/*************************************************************************
+ *
+ * Structures and closely related defines.
+ *
+ *************************************************************************/
+
+struct board_t;
+struct channel_t;
+
+/************************************************************************
+ * Per board operations structure *
+ ************************************************************************/
+struct board_ops {
+ void (*tasklet) (unsigned long data);
+ JSM_IRQRETURN_TYPE (*intr) (int irq, void *voidbrd, struct pt_regs *regs);
+ void (*uart_init) (struct channel_t *ch);
+ void (*uart_off) (struct channel_t *ch);
+ int (*drain) (struct tty_struct *tty, uint seconds);
+ void (*param) (struct channel_t *ch);
+ void (*assert_modem_signals) (struct channel_t *ch);
+ void (*flush_uart_write) (struct channel_t *ch);
+ void (*flush_uart_read) (struct channel_t *ch);
+ void (*disable_receiver) (struct channel_t *ch);
+ void (*enable_receiver) (struct channel_t *ch);
+ void (*send_break) (struct channel_t *ch);
+ void (*send_start_character) (struct channel_t *ch);
+ void (*send_stop_character) (struct channel_t *ch);
+ void (*copy_data_from_queue_to_uart) (struct channel_t *ch);
+ uint (*get_uart_bytes_left) (struct channel_t *ch);
+ void (*send_immediate_char) (struct channel_t *ch, unsigned char);
+};
+
+
+/*
+ * Per-board information
+ */
+struct board_t
style: use "struct board" not "board_t" nor "struct board_t"
+{
+ int magic; /* Board Magic number. */
+ int boardnum; /* Board number: 0-32 */
+
+ int type; /* Type of board */
+ char *name; /* Product Name */
+ u16 vendor; /* PCI vendor ID */
+ u16 device; /* PCI device ID */
+ u16 subvendor; /* PCI subsystem vendor ID */
+ u16 subdevice; /* PCI subsystem device ID */
do not store these; they are already in struct pci_dev
+ uchar rev; /* PCI revision ID */
+ uint pci_bus; /* PCI bus value */
+ uint pci_slot; /* PCI slot value */
ditto
+ struct pci_dev *pci_dev;
+ uint maxports; /* MAX ports this board can handle */
+
+ spinlock_t bd_lock; /* Used to protect board */
+
+ spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and
+ * the interrupt routine from each other.
+ */
+
+ uint state; /* State of card. */
+ wait_queue_head_t state_wait; /* Place to sleep on for state change */
+
+ struct tasklet_struct helper_tasklet; /* Poll helper tasklet */
+
+ uint nasync; /* Number of ports on card */
+
+ uint irq; /* Interrupt request number */
+ ulong intr_count; /* Count of interrupts */
+
+ ulong membase; /* Start of base memory of the card */
+ ulong membase_end; /* End of base memory of the card */
+
+ uchar *re_map_membase;/* Remapped memory of the card */
mark '__iomem'
+ ulong iobase; /* Start of io base of the card */
+ ulong iobase_end; /* End of io base of the card */
+
+ uint bd_uart_offset; /* Space between each UART */
+
+ struct channel_t *channels[MAXPORTS]; /* array of pointers to our channels. */
+
+ struct tty_driver SerialDriver;
+ char SerialName[200];
+ struct tty_driver PrintDriver;
+ char PrintName[200];
+
+ uint jsm_Major_Serial_Registered;
+ uint jsm_Major_TransparentPrint_Registered;
+
+ uint jsm_Serial_Major;
+ uint jsm_TransparentPrint_Major;
+
+ uint TtyRefCnt;
style: eliminate StudlyCaps. use "tty_ref_cnt" not "TtyRefCnt".
This is not C++.
+ char *flipbuf; /* Our flip buffer, alloced if board is found */
+
+ u16 dpatype; /* The board "type", as defined by DPA */
+ u16 dpastatus; /* The board "status", as defined by DPA */
+
+ uint bd_dividend; /* Board/UARTs specific dividend */
+
+ struct board_ops *bd_ops;
+
+ /* /proc/<board> entries */
+ struct proc_dir_entry *proc_entry_pointer;
+ struct jsm_proc_entry *jsm_board_table;
+};
+
+
+/************************************************************************
+ * Unit flag definitions for un_flags.
+ ************************************************************************/
+#define UN_ISOPEN 0x0001 /* Device is open */
+#define UN_CLOSING 0x0002 /* Line is being closed */
+#define UN_IMM 0x0004 /* Service immediately */
+#define UN_BUSY 0x0008 /* Some work this channel */
+#define UN_BREAKI 0x0010 /* Input break received */
+#define UN_PWAIT 0x0020 /* Printer waiting for terminal */
+#define UN_TIME 0x0040 /* Waiting on time */
+#define UN_EMPTY 0x0080 /* Waiting output queue empty */
+#define UN_LOW 0x0100 /* Waiting output low water mark*/
+#define UN_EXCL_OPEN 0x0200 /* Open for exclusive use */
+#define UN_WOPEN 0x0400 /* Device waiting for open */
+#define UN_WIOCTL 0x0800 /* Device waiting for open */
+#define UN_HANGUP 0x8000 /* Carrier lost */
+
+
+/************************************************************************
+ * Structure for terminal or printer unit.
+ ************************************************************************/
+struct un_t {
+ int magic; /* Unit Magic Number. */
+ struct channel_t *un_ch;
+ ulong un_time;
+ uint un_type;
+ uint un_open_count; /* Counter of opens to port */
+ struct tty_struct *un_tty;/* Pointer to unit tty structure */
+ uint un_flags; /* Unit flags */
+ wait_queue_head_t un_flags_wait; /* Place to sleep to wait on unit */
+ uint un_dev; /* Minor device number */
+};
+
+
+/************************************************************************
+ * Device flag definitions for ch_flags.
+ ************************************************************************/
+#define CH_PRON 0x0001 /* Printer on string */
+#define CH_STOP 0x0002 /* Output is stopped */
+#define CH_STOPI 0x0004 /* Input is stopped */
+#define CH_CD 0x0008 /* Carrier is present */
+#define CH_FCAR 0x0010 /* Carrier forced on */
+#define CH_HANGUP 0x0020 /* Hangup received */
+
+#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */
+#define CH_OPENING 0x0080 /* Port in fragile open state */
+#define CH_CLOSING 0x0100 /* Port in fragile close state */
+#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */
+#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */
+#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */
+#define CH_BREAK_SENDING 0x1000 /* Break is being sent */
+#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */
+#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */
+#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */
+
+/*
+ * Definitions for ch_sniff_flags
+ */
+#define SNIFF_OPEN 0x1
+#define SNIFF_WAIT_DATA 0x2
+#define SNIFF_WAIT_SPACE 0x4
+
+
+/* Our Read/Error/Write queue sizes */
+#define RQUEUEMASK 0x1FFF /* 8 K - 1 */
+#define EQUEUEMASK 0x1FFF /* 8 K - 1 */
+#define WQUEUEMASK 0x0FFF /* 4 K - 1 */
+#define RQUEUESIZE (RQUEUEMASK + 1)
+#define EQUEUESIZE RQUEUESIZE
+#define WQUEUESIZE (WQUEUEMASK + 1)
+
+
+/************************************************************************
+ * Channel information structure.
+ ************************************************************************/
+struct channel_t {
+ struct uart_port uart_port;
+ int magic; /* Channel Magic Number */
+ struct board_t *ch_bd; /* Board structure pointer */
+ struct un_t ch_tun; /* Terminal unit info */
+ struct un_t ch_pun; /* Printer unit info */
+
+ spinlock_t ch_lock; /* provide for serialization */
+ wait_queue_head_t ch_flags_wait;
+
+ uint ch_portnum; /* Port number, 0 offset. */
+ uint ch_open_count; /* open count */
+ uint ch_flags; /* Channel flags */
+
+ ulong ch_close_delay; /* How long we should drop RTS/DTR for */
+
+ ulong ch_cpstime; /* Time for CPS calculations */
+
+ tcflag_t ch_c_iflag; /* channel iflags */
+ tcflag_t ch_c_cflag; /* channel cflags */
+ tcflag_t ch_c_oflag; /* channel oflags */
+ tcflag_t ch_c_lflag; /* channel lflags */
+ uchar ch_stopc; /* Stop character */
+ uchar ch_startc; /* Start character */
+
+ uint ch_old_baud; /* Cache of the current baud */
+ uint ch_custom_speed;/* Custom baud, if set */
+
+ uint ch_wopen; /* Waiting for open process cnt */
+
+ uchar ch_mostat; /* FEP output modem status */
+ uchar ch_mistat; /* FEP input modem status */
+
+ struct neo_uart_struct *ch_neo_uart; /* Pointer to the "mapped" UART struct */
+ uchar ch_cached_lsr; /* Cached value of the LSR register */
+
+ uchar *ch_rqueue; /* Our read queue buffer - malloc'ed */
+ ushort ch_r_head; /* Head location of the read queue */
+ ushort ch_r_tail; /* Tail location of the read queue */
+
+ uchar *ch_equeue; /* Our error queue buffer - malloc'ed */
+ ushort ch_e_head; /* Head location of the error queue */
+ ushort ch_e_tail; /* Tail location of the error queue */
+
+ uchar *ch_wqueue; /* Our write queue buffer - malloc'ed */
+ ushort ch_w_head; /* Head location of the write queue */
+ ushort ch_w_tail; /* Tail location of the write queue */
+
+ ulong ch_rxcount; /* total of data received so far */
+ ulong ch_txcount; /* total of data transmitted so far */
+
+ uchar ch_r_tlevel; /* Receive Trigger level */
+ uchar ch_t_tlevel; /* Transmit Trigger level */
+
+ uchar ch_r_watermark; /* Receive Watermark */
+
+
+ uint ch_stops_sent; /* How many times I have sent a stop character
+ * to try to stop the other guy sending.
+ */
+ ulong ch_err_parity; /* Count of parity errors on channel */
+ ulong ch_err_frame; /* Count of framing errors on channel */
+ ulong ch_err_break; /* Count of breaks on channel */
+ ulong ch_err_overrun; /* Count of overruns on channel */
+
+ ulong ch_xon_sends; /* Count of xons transmitted */
+ ulong ch_xoff_sends; /* Count of xoffs transmitted */
+
+ /* /proc/<board>/<channel> entries */
+ struct proc_dir_entry *proc_entry_pointer;
+ struct jsm_proc_entry *jsm_channel_table;
+
+ uint ch_sniff_in;
+ uint ch_sniff_out;
+ char *ch_sniff_buf; /* Sniff buffer for proc */
+ ulong ch_sniff_flags; /* Channel flags */
+ wait_queue_head_t ch_sniff_wait;
+};
+
+
+
+/*************************************************************************
+ *
+ * Prototypes for non-static functions used in more than one module
+ *
+ *************************************************************************/
+
+extern void *jsm_driver_kzmalloc(size_t size, int priority);
+extern char *jsm_ioctl_name(int cmd);
+
+/*
+ * Our Global Variables.
+ */
+
+extern struct uart_driver jsm_uart_driver;
+
+extern int jsm_driver_state; /* The state of the driver */
+extern uint jsm_Major; /* Our driver/mgmt major */
+extern int jsm_debug; /* Debug variable */
+extern int jsm_rawreadok; /* Set if user wants rawreads */
+extern int jsm_trcbuf_size; /* Size of the ringbuffer */
+extern spinlock_t jsm_global_lock; /* Driver global spinlock */
+extern uint jsm_NumBoards; /* Total number of boards */
+extern struct board_t *jsm_Board[MAXBOARDS]; /* Array of board structs */
+extern ulong jsm_poll_counter; /* Times the poller has run */
+extern char *jsm_state_text[]; /* Array of state text */
+extern char *jsm_driver_state_text[];/* Array of driver state text */
+
+
+void jsm_proc_register_basic_prescan(void);
+int jsm_proc_register_basic_postscan(int board_num);
+void jsm_proc_unregister_all(void);
+void jsm_proc_unregister_brd(int board_num);
+
+#endif
diff -Nuar linux-2.6.9.orig/drivers/serial/jsm/jsm_kcompat.h linux-2.6.9.new/drivers/serial/jsm/jsm_kcompat.h
--- linux-2.6.9.orig/drivers/serial/jsm/jsm_kcompat.h 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.9.new/drivers/serial/jsm/jsm_kcompat.h 2005-02-27 17:14:44.747952016 -0600
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2004 Digi International (www.digi.com)
+ * Scott H Kilau <Scott_Kilau at digi dot com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
+ *
+ *************************************************************************
+ *
+ * This file is intended to contain all the kernel "differences" between the
+ * various kernels that we support.
+ *
+ *************************************************************************/
+
+#ifndef __JSM_KCOMPAT_H
+#define __JSM_KCOMPAT_H
+
+# define JSM_MAJOR(x) (imajor(x))
+# define JSM_MINOR(x) (iminor(x))
+# define JSM_TTY_MAJOR(tty) (MAJOR(tty_devnum(tty)))
+# define JSM_TTY_MINOR(tty) (MINOR(tty_devnum(tty)))
+
+# define JSM_MOD_INC_USE_COUNT(rtn) (rtn = 1)
+# define JSM_MOD_DEC_USE_COUNT
+
+# define JSM_IRQRETURN_TYPE irqreturn_t
+# define JSM_IRQ_RETURN(x) return x;
+
+# define PARM_GEN_IP (PDE(file->f_dentry->d_inode))
+
+# define JSM_GET_TTY_COUNT(x) (x->count)
+
+#endif /* ! __JSM_KCOMPAT_H */
diff -Nuar linux-2.6.9.orig/drivers/serial/jsm/jsm_mgmt.h linux-2.6.9.new/drivers/serial/jsm/jsm_mgmt.h
--- linux-2.6.9.orig/drivers/serial/jsm/jsm_mgmt.h 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.9.new/drivers/serial/jsm/jsm_mgmt.h 2005-02-27 17:14:44.747952016 -0600
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2003 Digi International (www.digi.com)
+ * Scott H Kilau <Scott_Kilau at digi dot com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
+ */
+
+#ifndef __JSM_MGMT_H
+#define __JSM_MGMT_H
+
+#define MAXMGMTDEVICES 8
+
+int jsm_mgmt_open(struct inode *inode, struct file *file);
+int jsm_mgmt_close(struct inode *inode, struct file *file);
+int jsm_mgmt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
+
+#endif
+
diff -Nuar linux-2.6.9.orig/drivers/serial/jsm/jsm_neo.h linux-2.6.9.new/drivers/serial/jsm/jsm_neo.h
--- linux-2.6.9.orig/drivers/serial/jsm/jsm_neo.h 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.9.new/drivers/serial/jsm/jsm_neo.h 2005-02-27 17:14:44.748951864 -0600
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2003 Digi International (www.digi.com)
+ * Scott H Kilau <Scott_Kilau at digi dot com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
+ *
+ */
+
+#ifndef __JSM_NEO_H
+#define __JSM_NEO_H
+
+#include "jsm_types.h"
+#include "jsm_driver.h"
+
+/************************************************************************
+ * Per channel/port NEO UART structure *
+ ************************************************************************
+ * Base Structure Entries Usage Meanings to Host *
+ * *
+ * W = read write R = read only *
+ * U = Unused. *
+ ************************************************************************/
+
+struct neo_uart_struct {
+ volatile uchar txrx; /* WR RHR/THR - Holding Reg */
+ volatile uchar ier; /* WR IER - Interrupt Enable Reg */
+ volatile uchar isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */
+ volatile uchar lcr; /* WR LCR - Line Control Reg */
+ volatile uchar mcr; /* WR MCR - Modem Control Reg */
+ volatile uchar lsr; /* WR LSR - Line Status Reg */
+ volatile uchar msr; /* WR MSR - Modem Status Reg */
+ volatile uchar spr; /* WR SPR - Scratch Pad Reg */
+ volatile uchar fctr; /* WR FCTR - Feature Control Reg */
+ volatile uchar efr; /* WR EFR - Enhanced Function Reg */
+ volatile uchar tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */
+ volatile uchar rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */
+ volatile uchar xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */
+ volatile uchar xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */
+ volatile uchar xonchar1; /* WR XON 1 - Xon Character 1 Reg */
+ volatile uchar xonchar2; /* WR XON 2 - XOn Character 2 Reg */
+
+ volatile uchar reserved1[0x2ff - 0x200]; /* U Reserved by Exar */
+ volatile uchar txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */
+ volatile uchar reserved2[0x37f - 0x340]; /* U Reserved by Exar */
+ volatile uchar rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */
+};
eliminate all use of 'volatile', as mentioned in another message.
+/* Where to read the extended interrupt register (32bits instead of 8bits) */
+#define UART_17158_POLL_ADDR_OFFSET 0x80
+
+
+/*
+ * These are the redefinitions for the FCTR on the XR17C158, since
+ * Exar made them different than their earlier design. (XR16C854)
+ */
+
+/* These are only applicable when table D is selected */
+#define UART_17158_FCTR_RTS_NODELAY 0x00
+#define UART_17158_FCTR_RTS_4DELAY 0x01
+#define UART_17158_FCTR_RTS_6DELAY 0x02
+#define UART_17158_FCTR_RTS_8DELAY 0x03
+#define UART_17158_FCTR_RTS_12DELAY 0x12
+#define UART_17158_FCTR_RTS_16DELAY 0x05
+#define UART_17158_FCTR_RTS_20DELAY 0x13
+#define UART_17158_FCTR_RTS_24DELAY 0x06
+#define UART_17158_FCTR_RTS_28DELAY 0x14
+#define UART_17158_FCTR_RTS_32DELAY 0x07
+#define UART_17158_FCTR_RTS_36DELAY 0x16
+#define UART_17158_FCTR_RTS_40DELAY 0x08
+#define UART_17158_FCTR_RTS_44DELAY 0x09
+#define UART_17158_FCTR_RTS_48DELAY 0x10
+#define UART_17158_FCTR_RTS_52DELAY 0x11
+
+#define UART_17158_FCTR_RTS_IRDA 0x10
+#define UART_17158_FCTR_RS485 0x20
+#define UART_17158_FCTR_TRGA 0x00
+#define UART_17158_FCTR_TRGB 0x40
+#define UART_17158_FCTR_TRGC 0x80
+#define UART_17158_FCTR_TRGD 0xC0
+
+/* 17158 trigger table selects.. */
+#define UART_17158_FCTR_BIT6 0x40
+#define UART_17158_FCTR_BIT7 0x80
+
+/* 17158 TX/RX memmapped buffer offsets */
+#define UART_17158_RX_FIFOSIZE 64
+#define UART_17158_TX_FIFOSIZE 64
+
+/* 17158 Extended IIR's */
+#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */
+#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */
+#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */
+#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */
+
+/*
+ * These are the extended interrupts that get sent
+ * back to us from the UART's 32bit interrupt register
+ */
+#define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */
+#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */
+#define UART_17158_TXRDY 0x3 /* TX Ready */
+#define UART_17158_MSR 0x4 /* Modem State Change */
+#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */
+#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */
+
+/*
+ * These are the EXTENDED definitions for the 17C158's Interrupt
+ * Enable Register.
+ */
+#define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */
+#define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */
+#define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */
+#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */
+#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */
+
+#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */
+#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */
+
+#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */
+#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */
+#define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */
+#define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */
+
+/*
+ * Our Global Variables
+ */
+extern struct board_ops jsm_neo_ops;
+
+#endif
diff -Nuar linux-2.6.9.orig/drivers/serial/jsm/jsm_pci.h linux-2.6.9.new/drivers/serial/jsm/jsm_pci.h
--- linux-2.6.9.orig/drivers/serial/jsm/jsm_pci.h 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.9.new/drivers/serial/jsm/jsm_pci.h 2005-02-27 17:14:44.748951864 -0600
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2003 Digi International (www.digi.com)
+ * Scott H Kilau <Scott_Kilau at digi dot com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
+ */
+
+/* $Id: jsm_pci.h,v 1.4 2004/01/06 16:44:49 scottk Exp $ */
+
+#ifndef __DGAP_PCI_H
+#define __DGAP_PCI_H
+
+#define PCIMAX 32 /* maximum number of PCI boards */
+
+#define DIGI_VID 0x114F
+
+#define PCI_DEVICE_NEO_4_DID 0x00B0
+#define PCI_DEVICE_NEO_8_DID 0x00B1
+#define PCI_DEVICE_NEO_2DB9_DID 0x00C8
+#define PCI_DEVICE_NEO_2DB9PRI_DID 0x00C9
+#define PCI_DEVICE_NEO_2RJ45_DID 0x00CA
+#define PCI_DEVICE_NEO_2RJ45PRI_DID 0x00CB
+#define PCI_DEVICE_NEO_1_422_DID 0x00CC
+#define PCI_DEVICE_NEO_1_422_485_DID 0x00CD
+#define PCI_DEVICE_NEO_2_422_485_DID 0x00CE
belongs in pci_ids.h
+#define PCI_DEVICE_NEO_4_PCI_NAME "Neo 4 PCI"
+#define PCI_DEVICE_NEO_8_PCI_NAME "Neo 8 PCI"
+#define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI"
+#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator"
+#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI"
+#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator"
+#define PCI_DEVICE_NEO_1_422_PCI_NAME "Neo 1 422 PCI"
+#define PCI_DEVICE_NEO_1_422_485_PCI_NAME "Neo 1 422/485 PCI"
+#define PCI_DEVICE_NEO_2_422_485_PCI_NAME "Neo 2 422/485 PCI"
+
+
+/* Size of Memory and I/O for PCI (4 K) */
+#define PCI_RAM_SIZE 0x1000
+
+/* Size of Memory (2MB) */
+#define PCI_MEM_SIZE 0x1000
+
+#endif
diff -Nuar linux-2.6.9.orig/drivers/serial/jsm/jsm_tty.h linux-2.6.9.new/drivers/serial/jsm/jsm_tty.h
--- linux-2.6.9.orig/drivers/serial/jsm/jsm_tty.h 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.9.new/drivers/serial/jsm/jsm_tty.h 2005-02-27 17:14:44.748951864 -0600
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2003 Digi International (www.digi.com)
+ * Scott H Kilau <Scott_Kilau at digi dot com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
+ */
+
+#ifndef __JSM_TTY_H
+#define __JSM_TTY_H
+
+#include "jsm_driver.h"
+
+int jsm_tty_write(struct uart_port *port);
+int jsm_tty_register(struct board_t *brd);
+
+int jsm_tty_init(struct board_t *);
+int jsm_uart_port_init(struct board_t *);
+int jsm_remove_uart_port(struct board_t *);
+
+void jsm_tty_uninit(struct board_t *);
+
+void jsm_input(struct channel_t *ch);
+void jsm_carrier(struct channel_t *ch);
+void jsm_check_queue_flow_control(struct channel_t *ch);
+void neo_clear_break(struct channel_t *ch, int force);
+
+
+void jsm_sniff_nowait_nolock(struct channel_t *ch, uchar *text, uchar *buf, int nbuf);
+
+#endif
diff -Nuar linux-2.6.9.orig/drivers/serial/jsm/jsm_types.h linux-2.6.9.new/drivers/serial/jsm/jsm_types.h
--- linux-2.6.9.orig/drivers/serial/jsm/jsm_types.h 1969-12-31 18:00:00.000000000 -0600
+++ linux-2.6.9.new/drivers/serial/jsm/jsm_types.h 2005-02-27 17:14:44.749951712 -0600
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2003 Digi International (www.digi.com)
+ * Scott H Kilau <Scott_Kilau at digi dot com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
+ */
+
+#ifndef __JSM_TYPES_H
+#define __JSM_TYPES_H
+
+#ifndef TRUE
+# define TRUE 1
+#endif
+
+#ifndef FALSE
+# define FALSE 0
+#endif
+
+/* Required for our shared headers! */
+typedef unsigned char uchar;
eliminate this entire file
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/