Re: Problem with 2.6.11-bk
From: Dave Airlie
Date: Tue Mar 15 2005 - 05:53:05 EST
> Got a problem here with the last few Linus -bk releases.
> 2.6.11-bk2 is running fine.
> 2.6.11-bk3 - 2.6.11-bk6 has the following problem:
> Everything is fine while the machine is booting. However as soon as X
> starts up the screen goes blank as normal but stays blank, no gdm login
> screen and the hard disk and floppy drive lights are on continuously.
> The machine is now locked up solid and needs a hard reset.
> I tried a serial console but get nothing after the kernel messages and
> the agetty login.
> The machine is question is an UP Athlon 1800+ XP with 768MB RAM, the
> graphics card is an AGP ATI Radeon 9200SE using the kernel AGP/DRM
> drivers and the Xorg radeon driver.
> It's running FC3.
> I've put 2.6.11-bk2 and 2.6.11-bk6 config's, dmesg's and an lspc -vv up
> on the web.
> When looking at this the other day I did get a message on the serial
> console after X started and the machine locked, about uhci host
> controller being disabled or something. Unfortunately I didn't make a
> note of it and didn't get it today for when I was preparing this report.
> Looking at the two dmesg's there is some difference in the usb messages.
> Anyway, thanks for your time and if you need any more info just let me
This is the same problem as i just mailed everyone about.. more
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/