[patch 3/6] DocBook: fix some descriptions
From: Martin Waitz
Date: Wed Apr 06 2005 - 06:54:53 EST
DocBook: fix some descriptions
Some KernelDoc descriptions are updated to match the current code.
No code changes.
Signed-off-by: Martin Waitz <tali@xxxxxxxxxxxxxx>
drivers/acpi/scan.c | 4 -
drivers/base/platform.c | 4 -
drivers/pci/hotplug.c | 4 +
drivers/pci/rom.c | 14 +++---
drivers/pnp/manager.c | 2
fs/bio.c | 2
fs/buffer.c | 11 ++---
fs/fs-writeback.c | 4 +
fs/mpage.c | 92 ++++++++++++++++++++++----------------------
fs/proc/base.c | 2
fs/seq_file.c | 9 +++-
fs/sysfs/file.c | 4 -
include/linux/fs.h | 100 ++++++++++++++++++++++++------------------------
include/linux/skbuff.h | 5 +-
include/net/sock.h | 1
kernel/sched.c | 3 -
kernel/sysctl.c | 2
lib/kobject.c | 3 -
mm/filemap.c | 17 ++++----
mm/page-writeback.c | 6 +-
mm/truncate.c | 4 -
net/core/datagram.c | 4 -
22 files changed, 160 insertions(+), 137 deletions(-)
Index: linux-docbook/kernel/sysctl.c
===================================================================
--- linux-docbook.orig/kernel/sysctl.c 2005-04-06 12:12:50.869129883 +0200
+++ linux-docbook/kernel/sysctl.c 2005-04-06 12:25:15.526488679 +0200
@@ -1969,6 +1969,7 @@ int proc_dointvec_jiffies(ctl_table *tab
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
+ * @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
@@ -1991,6 +1992,7 @@ int proc_dointvec_userhz_jiffies(ctl_tab
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
+ * @ppos: the current position in the file
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
Index: linux-docbook/lib/kobject.c
===================================================================
--- linux-docbook.orig/lib/kobject.c 2005-04-06 12:12:50.870129732 +0200
+++ linux-docbook/lib/kobject.c 2005-04-06 12:25:15.527488527 +0200
@@ -217,13 +217,12 @@ int kobject_register(struct kobject * ko
/**
* kobject_set_name - Set the name of an object
* @kobj: object.
- * @name: name.
+ * @fmt: format string used to build the name
*
* If strlen(name) >= KOBJ_NAME_LEN, then use a dynamically allocated
* string that @kobj->k_name points to. Otherwise, use the static
* @kobj->name array.
*/
-
int kobject_set_name(struct kobject * kobj, const char * fmt, ...)
{
int error = 0;
Index: linux-docbook/kernel/sched.c
===================================================================
--- linux-docbook.orig/kernel/sched.c 2005-04-06 12:12:50.870129732 +0200
+++ linux-docbook/kernel/sched.c 2005-04-06 12:25:15.532487770 +0200
@@ -2906,6 +2906,7 @@ static void __wake_up_common(wait_queue_
* @q: the waitqueue
* @mode: which threads
* @nr_exclusive: how many wake-one or wake-many threads to wake up
+ * @key: is directly passed to the wakeup function
*/
void fastcall __wake_up(wait_queue_head_t *q, unsigned int mode,
int nr_exclusive, void *key)
@@ -2928,7 +2929,7 @@ void fastcall __wake_up_locked(wait_queu
}
/**
- * __wake_up - sync- wake up threads blocked on a waitqueue.
+ * __wake_up_sync - wake up threads blocked on a waitqueue.
* @q: the waitqueue
* @mode: which threads
* @nr_exclusive: how many wake-one or wake-many threads to wake up
Index: linux-docbook/fs/buffer.c
===================================================================
--- linux-docbook.orig/fs/buffer.c 2005-04-06 12:12:50.875128976 +0200
+++ linux-docbook/fs/buffer.c 2005-04-06 12:25:15.536487165 +0200
@@ -774,15 +774,14 @@ repeat:
/**
* sync_mapping_buffers - write out and wait upon a mapping's "associated"
* buffers
- * @buffer_mapping - the mapping which backs the buffers' data
- * @mapping - the mapping which wants those buffers written
+ * @mapping: the mapping which wants those buffers written
*
* Starts I/O against the buffers at mapping->private_list, and waits upon
* that I/O.
*
- * Basically, this is a convenience function for fsync(). @buffer_mapping is
- * the blockdev which "owns" the buffers and @mapping is a file or directory
- * which needs those buffers to be written for a successful fsync().
+ * Basically, this is a convenience function for fsync().
+ * @mapping is a file or directory which needs those buffers to be written for
+ * a successful fsync().
*/
int sync_mapping_buffers(struct address_space *mapping)
{
@@ -1263,6 +1262,7 @@ __getblk_slow(struct block_device *bdev,
/**
* mark_buffer_dirty - mark a buffer_head as needing writeout
+ * @bh: the buffer_head to mark dirty
*
* mark_buffer_dirty() will set the dirty bit against the buffer, then set its
* backing page dirty, then tag the page as dirty in its address_space's radix
@@ -1501,6 +1501,7 @@ EXPORT_SYMBOL(__breadahead);
/**
* __bread() - reads a specified block and returns the bh
+ * @bdev: the block_device to read from
* @block: number of block
* @size: size (in bytes) to read
*
Index: linux-docbook/drivers/pci/rom.c
===================================================================
--- linux-docbook.orig/drivers/pci/rom.c 2005-04-06 12:12:50.884127615 +0200
+++ linux-docbook/drivers/pci/rom.c 2005-04-06 12:25:15.537487014 +0200
@@ -14,7 +14,7 @@
/**
* pci_enable_rom - enable ROM decoding for a PCI device
- * @dev: PCI device to enable
+ * @pdev: PCI device to enable
*
* Enable ROM decoding on @dev. This involves simply turning on the last
* bit of the PCI ROM BAR. Note that some cards may share address decoders
@@ -32,7 +32,7 @@ static void pci_enable_rom(struct pci_de
/**
* pci_disable_rom - disable ROM decoding for a PCI device
- * @dev: PCI device to disable
+ * @pdev: PCI device to disable
*
* Disable ROM decoding on a PCI device by turning off the last bit in the
* ROM BAR.
@@ -47,7 +47,7 @@ static void pci_disable_rom(struct pci_d
/**
* pci_map_rom - map a PCI ROM to kernel space
- * @dev: pointer to pci device struct
+ * @pdev: pointer to pci device struct
* @size: pointer to receive size of pci window over ROM
* @return: kernel virtual pointer to image of ROM
*
@@ -132,7 +132,7 @@ void __iomem *pci_map_rom(struct pci_dev
/**
* pci_map_rom_copy - map a PCI ROM to kernel space, create a copy
- * @dev: pointer to pci device struct
+ * @pdev: pointer to pci device struct
* @size: pointer to receive size of pci window over ROM
* @return: kernel virtual pointer to image of ROM
*
@@ -166,7 +166,7 @@ void __iomem *pci_map_rom_copy(struct pc
/**
* pci_unmap_rom - unmap the ROM from kernel space
- * @dev: pointer to pci device struct
+ * @pdev: pointer to pci device struct
* @rom: virtual address of the previous mapping
*
* Remove a mapping of a previously mapped ROM
@@ -187,7 +187,7 @@ void pci_unmap_rom(struct pci_dev *pdev,
/**
* pci_remove_rom - disable the ROM and remove its sysfs attribute
- * @dev: pointer to pci device struct
+ * @pdev: pointer to pci device struct
*
* Remove the rom file in sysfs and disable ROM decoding.
*/
@@ -206,7 +206,7 @@ void pci_remove_rom(struct pci_dev *pdev
/**
* pci_cleanup_rom - internal routine for freeing the ROM copy created
* by pci_map_rom_copy called from remove.c
- * @dev: pointer to pci device struct
+ * @pdev: pointer to pci device struct
*
* Free the copied ROM if we allocated one.
*/
Index: linux-docbook/include/linux/skbuff.h
===================================================================
--- linux-docbook.orig/include/linux/skbuff.h 2005-04-06 12:24:11.954112753 +0200
+++ linux-docbook/include/linux/skbuff.h 2005-04-06 12:25:15.539486711 +0200
@@ -173,13 +173,14 @@ struct skb_shared_info {
* @h: Transport layer header
* @nh: Network layer header
* @mac: Link layer header
- * @dst: FIXME: Describe this field
+ * @dst: destination entry
+ * @sp: the security path, used for xfrm
* @cb: Control buffer. Free for use by every layer. Put private vars here
* @len: Length of actual data
* @data_len: Data length
* @mac_len: Length of link layer header
* @csum: Checksum
- * @__unused: Dead field, may be reused
+ * @local_df: allow local fragmentation
* @cloned: Head may be cloned (check refcnt to be sure)
* @nohdr: Payload reference only, must not modify header
* @pkt_type: Packet class
Index: linux-docbook/include/linux/fs.h
===================================================================
--- linux-docbook.orig/include/linux/fs.h 2005-04-06 12:24:11.951113207 +0200
+++ linux-docbook/include/linux/fs.h 2005-04-06 12:25:15.542486257 +0200
@@ -1065,71 +1065,75 @@ int sync_inode(struct inode *inode, stru
* with a particular exported file system - particularly enabling nfsd and
* the filesystem to co-operate when dealing with file handles.
*
- * export_operations contains two basic operation for dealing with file handles,
- * decode_fh() and encode_fh(), and allows for some other operations to be defined
- * which standard helper routines use to get specific information from the
- * filesystem.
+ * export_operations contains two basic operation for dealing with file
+ * handles, decode_fh() and encode_fh(), and allows for some other
+ * operations to be defined which standard helper routines use to get
+ * specific information from the filesystem.
*
* nfsd encodes information use to determine which filesystem a filehandle
- * applies to in the initial part of the file handle. The remainder, termed a
- * file handle fragment, is controlled completely by the filesystem.
- * The standard helper routines assume that this fragment will contain one or two
- * sub-fragments, one which identifies the file, and one which may be used to
- * identify the (a) directory containing the file.
+ * applies to in the initial part of the file handle. The remainder, termed
+ * a file handle fragment, is controlled completely by the filesystem. The
+ * standard helper routines assume that this fragment will contain one or
+ * two sub-fragments, one which identifies the file, and one which may be
+ * used to identify the (a) directory containing the file.
*
* In some situations, nfsd needs to get a dentry which is connected into a
- * specific part of the file tree. To allow for this, it passes the function
- * acceptable() together with a @context which can be used to see if the dentry
- * is acceptable. As there can be multiple dentrys for a given file, the filesystem
- * should check each one for acceptability before looking for the next. As soon
- * as an acceptable one is found, it should be returned.
+ * specific part of the file tree. To allow for this, it passes the
+ * function acceptable() together with a @context which can be used to see
+ * if the dentry is acceptable. As there can be multiple dentrys for a
+ * given file, the filesystem should check each one for acceptability before
+ * looking for the next. As soon as an acceptable one is found, it should
+ * be returned.
*
* decode_fh:
- * @decode_fh is given a &struct super_block (@sb), a file handle fragment (@fh, @fh_len)
- * and an acceptability testing function (@acceptable, @context). It should return
- * a &struct dentry which refers to the same file that the file handle fragment refers
- * to, and which passes the acceptability test. If it cannot, it should return
- * a %NULL pointer if the file was found but no acceptable &dentries were available, or
- * a %ERR_PTR error code indicating why it couldn't be found (e.g. %ENOENT or %ENOMEM).
+ * @decode_fh is given a &struct super_block (@sb), a file handle fragment
+ * (@fh, @fh_len) and an acceptability testing function (@acceptable,
+ * @context). It should return a &struct dentry which refers to the same
+ * file that the file handle fragment refers to, and which passes the
+ * acceptability test. If it cannot, it should return a %NULL pointer if
+ * the file was found but no acceptable &dentries were available, or a
+ * %ERR_PTR error code indicating why it couldn't be found (e.g. %ENOENT or
+ * %ENOMEM).
*
* encode_fh:
- * @encode_fh should store in the file handle fragment @fh (using at most @max_len bytes)
- * information that can be used by @decode_fh to recover the file refered to by the
- * &struct dentry @de. If the @connectable flag is set, the encode_fh() should store
- * sufficient information so that a good attempt can be made to find not only
- * the file but also it's place in the filesystem. This typically means storing
- * a reference to de->d_parent in the filehandle fragment.
- * encode_fh() should return the number of bytes stored or a negative error code
- * such as %-ENOSPC
+ * @encode_fh should store in the file handle fragment @fh (using at most
+ * @max_len bytes) information that can be used by @decode_fh to recover the
+ * file refered to by the &struct dentry @de. If the @connectable flag is
+ * set, the encode_fh() should store sufficient information so that a good
+ * attempt can be made to find not only the file but also it's place in the
+ * filesystem. This typically means storing a reference to de->d_parent in
+ * the filehandle fragment. encode_fh() should return the number of bytes
+ * stored or a negative error code such as %-ENOSPC
*
* get_name:
- * @get_name should find a name for the given @child in the given @parent directory.
- * The name should be stored in the @name (with the understanding that it is already
- * pointing to a a %NAME_MAX+1 sized buffer. get_name() should return %0 on success,
- * a negative error code or error.
- * @get_name will be called without @parent->i_sem held.
+ * @get_name should find a name for the given @child in the given @parent
+ * directory. The name should be stored in the @name (with the
+ * understanding that it is already pointing to a a %NAME_MAX+1 sized
+ * buffer. get_name() should return %0 on success, a negative error code
+ * or error. @get_name will be called without @parent->i_sem held.
*
* get_parent:
- * @get_parent should find the parent directory for the given @child which is also
- * a directory. In the event that it cannot be found, or storage space cannot be
- * allocated, a %ERR_PTR should be returned.
+ * @get_parent should find the parent directory for the given @child which
+ * is also a directory. In the event that it cannot be found, or storage
+ * space cannot be allocated, a %ERR_PTR should be returned.
*
* get_dentry:
- * Given a &super_block (@sb) and a pointer to a file-system specific inode identifier,
- * possibly an inode number, (@inump) get_dentry() should find the identified inode and
- * return a dentry for that inode.
- * Any suitable dentry can be returned including, if necessary, a new dentry created
- * with d_alloc_root. The caller can then find any other extant dentrys by following the
- * d_alias links. If a new dentry was created using d_alloc_root, DCACHE_NFSD_DISCONNECTED
- * should be set, and the dentry should be d_rehash()ed.
+ * Given a &super_block (@sb) and a pointer to a file-system specific inode
+ * identifier, possibly an inode number, (@inump) get_dentry() should find
+ * the identified inode and return a dentry for that inode. Any suitable
+ * dentry can be returned including, if necessary, a new dentry created with
+ * d_alloc_root. The caller can then find any other extant dentrys by
+ * following the d_alias links. If a new dentry was created using
+ * d_alloc_root, DCACHE_NFSD_DISCONNECTED should be set, and the dentry
+ * should be d_rehash()ed.
*
- * If the inode cannot be found, either a %NULL pointer or an %ERR_PTR code can be returned.
- * The @inump will be whatever was passed to nfsd_find_fh_dentry() in either the
- * @obj or @parent parameters.
+ * If the inode cannot be found, either a %NULL pointer or an %ERR_PTR code
+ * can be returned. The @inump will be whatever was passed to
+ * nfsd_find_fh_dentry() in either the @obj or @parent parameters.
*
* Locking rules:
- * get_parent is called with child->d_inode->i_sem down
- * get_name is not (which is possibly inconsistent)
+ * get_parent is called with child->d_inode->i_sem down
+ * get_name is not (which is possibly inconsistent)
*/
struct export_operations {
Index: linux-docbook/net/core/datagram.c
===================================================================
--- linux-docbook.orig/net/core/datagram.c 2005-04-06 12:24:11.964111239 +0200
+++ linux-docbook/net/core/datagram.c 2005-04-06 12:25:15.543486105 +0200
@@ -203,7 +203,7 @@ void skb_free_datagram(struct sock *sk,
* skb_copy_datagram_iovec - Copy a datagram to an iovec.
* @skb: buffer to copy
* @offset: offset in the buffer to start copying from
- * @iovec: io vector to copy to
+ * @to: io vector to copy to
* @len: amount of data to copy from buffer to iovec
*
* Note: the iovec is modified during the copy.
@@ -379,7 +379,7 @@ fault:
* skb_copy_and_csum_datagram_iovec - Copy and checkum skb to user iovec.
* @skb: skbuff
* @hlen: hardware length
- * @iovec: io vector
+ * @iov: io vector
*
* Caller _must_ check that skb will fit to this iovec.
*
Index: linux-docbook/fs/mpage.c
===================================================================
--- linux-docbook.orig/fs/mpage.c 2005-04-06 12:12:50.874129127 +0200
+++ linux-docbook/fs/mpage.c 2005-04-06 12:25:15.545485803 +0200
@@ -160,52 +160,6 @@ map_buffer_to_page(struct page *page, st
} while (page_bh != head);
}
-/**
- * mpage_readpages - populate an address space with some pages, and
- * start reads against them.
- *
- * @mapping: the address_space
- * @pages: The address of a list_head which contains the target pages. These
- * pages have their ->index populated and are otherwise uninitialised.
- *
- * The page at @pages->prev has the lowest file offset, and reads should be
- * issued in @pages->prev to @pages->next order.
- *
- * @nr_pages: The number of pages at *@pages
- * @get_block: The filesystem's block mapper function.
- *
- * This function walks the pages and the blocks within each page, building and
- * emitting large BIOs.
- *
- * If anything unusual happens, such as:
- *
- * - encountering a page which has buffers
- * - encountering a page which has a non-hole after a hole
- * - encountering a page with non-contiguous blocks
- *
- * then this code just gives up and calls the buffer_head-based read function.
- * It does handle a page which has holes at the end - that is a common case:
- * the end-of-file on blocksize < PAGE_CACHE_SIZE setups.
- *
- * BH_Boundary explanation:
- *
- * There is a problem. The mpage read code assembles several pages, gets all
- * their disk mappings, and then submits them all. That's fine, but obtaining
- * the disk mappings may require I/O. Reads of indirect blocks, for example.
- *
- * So an mpage read of the first 16 blocks of an ext2 file will cause I/O to be
- * submitted in the following order:
- * 12 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16
- * because the indirect block has to be read to get the mappings of blocks
- * 13,14,15,16. Obviously, this impacts performance.
- *
- * So what we do it to allow the filesystem's get_block() function to set
- * BH_Boundary when it maps block 11. BH_Boundary says: mapping of the block
- * after this one will require I/O against a block which is probably close to
- * this one. So you should push what I/O you have currently accumulated.
- *
- * This all causes the disk requests to be issued in the correct order.
- */
static struct bio *
do_mpage_readpage(struct bio *bio, struct page *page, unsigned nr_pages,
sector_t *last_block_in_bio, get_block_t get_block)
@@ -320,6 +274,52 @@ confused:
goto out;
}
+/**
+ * mpage_readpages - populate an address space with some pages, and
+ * start reads against them.
+ *
+ * @mapping: the address_space
+ * @pages: The address of a list_head which contains the target pages. These
+ * pages have their ->index populated and are otherwise uninitialised.
+ *
+ * The page at @pages->prev has the lowest file offset, and reads should be
+ * issued in @pages->prev to @pages->next order.
+ *
+ * @nr_pages: The number of pages at *@pages
+ * @get_block: The filesystem's block mapper function.
+ *
+ * This function walks the pages and the blocks within each page, building and
+ * emitting large BIOs.
+ *
+ * If anything unusual happens, such as:
+ *
+ * - encountering a page which has buffers
+ * - encountering a page which has a non-hole after a hole
+ * - encountering a page with non-contiguous blocks
+ *
+ * then this code just gives up and calls the buffer_head-based read function.
+ * It does handle a page which has holes at the end - that is a common case:
+ * the end-of-file on blocksize < PAGE_CACHE_SIZE setups.
+ *
+ * BH_Boundary explanation:
+ *
+ * There is a problem. The mpage read code assembles several pages, gets all
+ * their disk mappings, and then submits them all. That's fine, but obtaining
+ * the disk mappings may require I/O. Reads of indirect blocks, for example.
+ *
+ * So an mpage read of the first 16 blocks of an ext2 file will cause I/O to be
+ * submitted in the following order:
+ * 12 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16
+ * because the indirect block has to be read to get the mappings of blocks
+ * 13,14,15,16. Obviously, this impacts performance.
+ *
+ * So what we do it to allow the filesystem's get_block() function to set
+ * BH_Boundary when it maps block 11. BH_Boundary says: mapping of the block
+ * after this one will require I/O against a block which is probably close to
+ * this one. So you should push what I/O you have currently accumulated.
+ *
+ * This all causes the disk requests to be issued in the correct order.
+ */
int
mpage_readpages(struct address_space *mapping, struct list_head *pages,
unsigned nr_pages, get_block_t get_block)
Index: linux-docbook/include/net/sock.h
===================================================================
--- linux-docbook.orig/include/net/sock.h 2005-04-06 12:24:11.956112450 +0200
+++ linux-docbook/include/net/sock.h 2005-04-06 12:25:15.546485651 +0200
@@ -161,6 +161,7 @@ struct sock_common {
* @sk_sndmsg_page: cached page for sendmsg
* @sk_sndmsg_off: cached offset for sendmsg
* @sk_send_head: front of stuff to transmit
+ * @sk_security: used by security modules
* @sk_write_pending: a write to stream socket waits to start
* @sk_state_change: callback to indicate change in the state of the sock
* @sk_data_ready: callback to indicate there is data to be processed
Index: linux-docbook/fs/fs-writeback.c
===================================================================
--- linux-docbook.orig/fs/fs-writeback.c 2005-04-06 12:12:50.877128674 +0200
+++ linux-docbook/fs/fs-writeback.c 2005-04-06 12:25:15.548485349 +0200
@@ -512,7 +512,8 @@ restart:
}
/**
- * sync_inodes
+ * sync_inodes - writes all inodes to disk
+ * @wait: wait for completion
*
* sync_inodes() goes through each super block's dirty inode list, writes the
* inodes out, waits on the writeout and puts the inodes back on the normal
@@ -604,6 +605,7 @@ EXPORT_SYMBOL(sync_inode);
/**
* generic_osync_inode - flush all dirty data for a given inode to disk
* @inode: inode to write
+ * @mapping: the address_space that should be flushed
* @what: what to write and wait upon
*
* This can be called by file_write functions for files which have the
Index: linux-docbook/fs/seq_file.c
===================================================================
--- linux-docbook.orig/fs/seq_file.c 2005-04-06 12:12:50.876128825 +0200
+++ linux-docbook/fs/seq_file.c 2005-04-06 12:25:15.548485349 +0200
@@ -51,7 +51,10 @@ EXPORT_SYMBOL(seq_open);
/**
* seq_read - ->read() method for sequential files.
- * @file, @buf, @size, @ppos: see file_operations method
+ * @file: the file to read from
+ * @buf: the buffer to read to
+ * @size: the maximum number of bytes to read
+ * @ppos: the current position in the file
*
* Ready-made ->f_op->read()
*/
@@ -219,7 +222,9 @@ Eoverflow:
/**
* seq_lseek - ->llseek() method for sequential files.
- * @file, @offset, @origin: see file_operations method
+ * @file: the file in question
+ * @offset: new position
+ * @origin: 0 for absolute, 1 for relative position
*
* Ready-made ->f_op->llseek()
*/
Index: linux-docbook/mm/page-writeback.c
===================================================================
--- linux-docbook.orig/mm/page-writeback.c 2005-04-06 12:12:50.872129430 +0200
+++ linux-docbook/mm/page-writeback.c 2005-04-06 12:25:15.550485046 +0200
@@ -255,7 +255,7 @@ static void balance_dirty_pages(struct a
/**
* balance_dirty_pages_ratelimited - balance dirty memory state
- * @mapping - address_space which was dirtied
+ * @mapping: address_space which was dirtied
*
* Processes which are dirtying memory should call in here once for each page
* which was newly dirtied. The function will periodically check the system's
@@ -562,8 +562,8 @@ int do_writepages(struct address_space *
/**
* write_one_page - write out a single page and optionally wait on I/O
*
- * @page - the page to write
- * @wait - if true, wait on writeout
+ * @page: the page to write
+ * @wait: if true, wait on writeout
*
* The page must be locked by the caller and will be unlocked upon return.
*
Index: linux-docbook/drivers/pnp/manager.c
===================================================================
--- linux-docbook.orig/drivers/pnp/manager.c 2005-04-06 12:12:50.887127162 +0200
+++ linux-docbook/drivers/pnp/manager.c 2005-04-06 12:25:15.551484894 +0200
@@ -253,7 +253,7 @@ void pnp_init_resource_table(struct pnp_
/**
* pnp_clean_resources - clears resources that were not manually set
- * @res - the resources to clean
+ * @res: the resources to clean
*
*/
static void pnp_clean_resource_table(struct pnp_resource_table * res)
Index: linux-docbook/fs/bio.c
===================================================================
--- linux-docbook.orig/fs/bio.c 2005-04-06 12:12:50.876128825 +0200
+++ linux-docbook/fs/bio.c 2005-04-06 12:25:15.552484743 +0200
@@ -140,6 +140,7 @@ inline void bio_init(struct bio *bio)
* bio_alloc_bioset - allocate a bio for I/O
* @gfp_mask: the GFP_ mask given to the slab allocator
* @nr_iovecs: number of iovecs to pre-allocate
+ * @bs: the bio_set to allocate from
*
* Description:
* bio_alloc_bioset will first try it's on mempool to satisfy the allocation.
@@ -629,6 +630,7 @@ out:
/**
* bio_map_user - map user address into bio
+ * @q: the request_queue_t for the bio
* @bdev: destination block device
* @uaddr: start of user address
* @len: length in bytes
Index: linux-docbook/fs/sysfs/file.c
===================================================================
--- linux-docbook.orig/fs/sysfs/file.c 2005-04-06 12:12:50.877128674 +0200
+++ linux-docbook/fs/sysfs/file.c 2005-04-06 12:25:15.553484592 +0200
@@ -96,7 +96,7 @@ static int fill_read_buffer(struct dentr
/**
* flush_read_buffer - push buffer to userspace.
* @buffer: data buffer for file.
- * @userbuf: user-passed buffer.
+ * @buf: user-passed buffer.
* @count: number of bytes requested.
* @ppos: file position.
*
@@ -164,7 +164,7 @@ out:
/**
* fill_write_buffer - copy buffer from userspace.
* @buffer: data buffer for file.
- * @userbuf: data from user.
+ * @buf: data from user.
* @count: number of bytes in @userbuf.
*
* Allocate @buffer->page if it hasn't been already, then
Index: linux-docbook/fs/proc/base.c
===================================================================
--- linux-docbook.orig/fs/proc/base.c 2005-04-06 12:24:11.948113661 +0200
+++ linux-docbook/fs/proc/base.c 2005-04-06 12:25:15.555484289 +0200
@@ -1740,7 +1740,7 @@ struct dentry *proc_pid_unhash(struct ta
/**
* proc_pid_flush - recover memory used by stale /proc/@pid/x entries
- * @proc_entry: directoy to prune.
+ * @proc_dentry: directoy to prune.
*
* Shrink the /proc directory that was used by the just killed thread.
*/
Index: linux-docbook/mm/truncate.c
===================================================================
--- linux-docbook.orig/mm/truncate.c 2005-04-06 12:12:50.872129430 +0200
+++ linux-docbook/mm/truncate.c 2005-04-06 12:25:15.556484138 +0200
@@ -242,7 +242,7 @@ EXPORT_SYMBOL(invalidate_inode_pages);
/**
* invalidate_inode_pages2_range - remove range of pages from an address_space
- * @mapping - the address_space
+ * @mapping: the address_space
* @start: the page offset 'from' which to invalidate
* @end: the page offset 'to' which to invalidate (inclusive)
*
@@ -322,7 +322,7 @@ EXPORT_SYMBOL_GPL(invalidate_inode_pages
/**
* invalidate_inode_pages2 - remove all pages from an address_space
- * @mapping - the address_space
+ * @mapping: the address_space
*
* Any pages which are found to be mapped into pagetables are unmapped prior to
* invalidation.
Index: linux-docbook/drivers/pci/hotplug.c
===================================================================
--- linux-docbook.orig/drivers/pci/hotplug.c 2005-04-06 12:12:50.883127766 +0200
+++ linux-docbook/drivers/pci/hotplug.c 2005-04-06 12:25:15.557483986 +0200
@@ -120,6 +120,10 @@ static int pci_visit_bridge (struct pci_
/**
* pci_visit_dev - scans the pci buses.
+ * @fn: callback functions that are called while visiting
+ * @wrapped_dev: the device to scan
+ * @wrapped_parent: the bus where @wrapped_dev is connected to
+ *
* Every bus and every function is presented to a custom
* function that can act upon it.
*/
Index: linux-docbook/drivers/base/platform.c
===================================================================
--- linux-docbook.orig/drivers/base/platform.c 2005-04-06 12:12:50.885127464 +0200
+++ linux-docbook/drivers/base/platform.c 2005-04-06 12:25:15.558483835 +0200
@@ -115,7 +115,7 @@ int platform_add_devices(struct platform
/**
* platform_device_register - add a platform-level device
- * @dev: platform device we're adding
+ * @pdev: platform device we're adding
*
*/
int platform_device_register(struct platform_device * pdev)
@@ -174,7 +174,7 @@ int platform_device_register(struct plat
/**
* platform_device_unregister - remove a platform-level device
- * @dev: platform device we're removing
+ * @pdev: platform device we're removing
*
* Note that this function will also release all memory- and port-based
* resources owned by the device (@dev->resource).
Index: linux-docbook/mm/filemap.c
===================================================================
--- linux-docbook.orig/mm/filemap.c 2005-04-06 12:12:50.871129581 +0200
+++ linux-docbook/mm/filemap.c 2005-04-06 12:25:15.561483381 +0200
@@ -152,9 +152,10 @@ static int sync_page(void *word)
/**
* filemap_fdatawrite_range - start writeback against all of a mapping's
* dirty pages that lie within the byte offsets <start, end>
- * @mapping: address space structure to write
- * @start: offset in bytes where the range starts
- * @end : offset in bytes where the range ends
+ * @mapping: address space structure to write
+ * @start: offset in bytes where the range starts
+ * @end: offset in bytes where the range ends
+ * @sync_mode: enable synchronous operation
*
* If sync_mode is WB_SYNC_ALL then this is a "data integrity" operation, as
* opposed to a regular memory * cleansing writeback. The difference between
@@ -518,8 +519,8 @@ EXPORT_SYMBOL(find_trylock_page);
/**
* find_lock_page - locate, pin and lock a pagecache page
*
- * @mapping - the address_space to search
- * @offset - the page index
+ * @mapping: the address_space to search
+ * @offset: the page index
*
* Locates the desired pagecache page, locks it, increments its reference
* count and returns its address.
@@ -558,9 +559,9 @@ EXPORT_SYMBOL(find_lock_page);
/**
* find_or_create_page - locate or add a pagecache page
*
- * @mapping - the page's address_space
- * @index - the page's index into the mapping
- * @gfp_mask - page allocation mode
+ * @mapping: the page's address_space
+ * @index: the page's index into the mapping
+ * @gfp_mask: page allocation mode
*
* Locates a page in the pagecache. If the page is not present, a new page
* is allocated using @gfp_mask and is added to the pagecache and to the VM's
Index: linux-docbook/drivers/acpi/scan.c
===================================================================
--- linux-docbook.orig/drivers/acpi/scan.c 2005-04-06 12:12:50.886127313 +0200
+++ linux-docbook/drivers/acpi/scan.c 2005-04-06 12:25:15.562483229 +0200
@@ -379,8 +379,8 @@ ACPI_DEVICE_ATTR(eject, 0200, NULL, acpi
/**
* setup_sys_fs_device_files - sets up the device files under device namespace
- * @@dev: acpi_device object
- * @@func: function pointer to create or destroy the device file
+ * @dev: acpi_device object
+ * @func: function pointer to create or destroy the device file
*/
static void
setup_sys_fs_device_files (
--
Martin Waitz
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/