Re: 2.6.12-rc3-mm3: ALSA broken ?

[Takashi Iwai]

At Tue, 17 May 2005 12:02:39 +0000,
J.A. Magallon wrote:
> 
> 
> On 05.13, Takashi Iwai wrote:
> > At Thu, 12 May 2005 22:27:16 +0000,
> > J.A. Magallon wrote:
> > > 
> > > Just a note: I need also to uncheck the 'Center/LFE jack as mic'
> > > switch.
> > 
> > Oh, it shouldn't be there :)
> > Try the patch below.  I'll commit it to ALSA tree.
> > 
> > 
> > > And a question. The output level depends on the
> > > Line _input_ volume. Higher the volume, lower the output level on
> > > all channels.
> > > This happens only if I 'Spread Front to Sourround and Center/LFE'.
> > > Should not the line volume be useless if the jack is set for output ?
> > > Or does its meaning change then...
> > 
> > Hmm, it's weird.  I don't see the signal routing via line-in control
> > to outputs in AD1985 datasheet...
> > 
> > 
> > Takashi
> > 
> > 
> > --- linux/sound/pci/ac97/ac97_patch.c	11 May 2005 11:00:17 -0000	1.82
> > +++ linux/sound/pci/ac97/ac97_patch.c	13 May 2005 09:35:19 -0000
> > @@ -1598,7 +1598,6 @@
> >  }
> >  
> >  static const snd_kcontrol_new_t snd_ac97_ad1985_controls[] = {
> > -	AC97_SINGLE("Center/LFE Jack as Mic", AC97_AD_SERIAL_CFG, 9, 1, 0),
> >  	AC97_SINGLE("Exchange Center/LFE", AC97_AD_SERIAL_CFG, 3, 1, 0)
> >  };
> >  
> 
> If I apply this, the control disappears, but I can't get any sound in that
> ouput even if I put ALSA in 6ch mode. It seems it defaults to 'on', and
> the mode switch '2ch -> 4ch -> 6ch' does not touch it. So it does not look
> like a redundant control.
> 
> Example: go into 4ch mode. Check this control. Then switch to 6ch mode.
> The Center jack has no sound (it should, shouldn't ?). Check it and voilà.
> It looks that the logic in the channel selection needs to set this flag also...

Yep, you're right.  Try the patch below.


Takashi

--- linux/sound/pci/ac97/ac97_patch.c	13 May 2005 09:58:46 -0000	1.83
+++ linux/sound/pci/ac97/ac97_patch.c	17 May 2005 12:18:24 -0000
@@ -1526,13 +1526,8 @@
 		.get = snd_ac97_ad1888_downmix_get,
 		.put = snd_ac97_ad1888_downmix_put
 	},
-#if 0
-	AC97_SINGLE("Surround Jack as Input", AC97_AD_MISC, 12, 1, 0),
-	AC97_SINGLE("Center/LFE Jack as Input", AC97_AD_MISC, 11, 1, 0),
-#else
 	AC97_SURROUND_JACK_MODE_CTL,
 	AC97_CHANNEL_MODE_CTL,
-#endif
 };
 
 static int patch_ad1888_specific(ac97_t *ac97)
@@ -1601,6 +1596,18 @@
 	AC97_SINGLE("Exchange Center/LFE", AC97_AD_SERIAL_CFG, 3, 1, 0)
 };
 
+static void ad1985_update_jacks(ac97_t *ac97)
+{
+	/* shared Line-In */
+	snd_ac97_update_bits(ac97, AC97_AD_MISC, 1 << 12,
+			     is_shared_linein(ac97) ? 0 : 1 << 12);
+	/* shared Mic */
+	snd_ac97_update_bits(ac97, AC97_AD_MISC, 1 << 11,
+			     is_shared_micin(ac97) ? 0 : 1 << 11);
+	snd_ac97_update_bits(ac97, AC97_AD_SERIAL_CFG, 9 << 11,
+			     is_shared_micin(ac97) ? 0 : 9 << 11);
+}
+
 static int patch_ad1985_specific(ac97_t *ac97)
 {
 	int err;
@@ -1616,7 +1623,7 @@
 #ifdef CONFIG_PM
 	.resume = ad18xx_resume,
 #endif
-	.update_jacks = ad1888_update_jacks,
+	.update_jacks = ad1985_update_jacks,
 };
 
 int patch_ad1985(ac97_t * ac97)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/