Re: [PATCH 2.6.12-rc5] m32r: Support M3A-2170(Mappi-III) platform

[Andrew Morton]

Hirokazu Takata <takata@xxxxxxxxxxxxxx> wrote:
>
> This patchset is for supporting a new m32r platform,
> M3A-2170(Mappi-III) evaluation board.
> An M32R chip multiprocessor is equipped on the board.
> http://http://www.linux-m32r.org/eng/platform/platform.html
> 
> ...
>  static void putc(char c)
>  {
> -
>  	while ((*BOOT_SIO0STS & 0x3) != 0x3) ;

cpu_relax()?

>  static void putc(char c)
>  {
> -
>  	while ((*SIO0STS & 0x1) == 0) ;

cpu_relax()?

> +unsigned char _inb(unsigned long port)
> +{
> +	if (port >= LAN_IOSTART && port < LAN_IOEND)
> +		return _ne_inb(PORT2ADDR_NE(port));
> +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
> +	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
> +		return *(volatile unsigned char *)__port2addr_ata(port);
> +	}
> +#endif
> +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
> +	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
> +		unsigned char b;
> +		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
> +		return b;
> +	} else
> +#endif
> +	return *(volatile unsigned char *)PORT2ADDR(port);
> +}

This file contains some very strange stuff.

> +unsigned char _inb_p(unsigned long port)
> +{
> +	unsigned char  v;
> +
> +	if (port >= LAN_IOSTART && port < LAN_IOEND)
> +		v = _ne_inb(PORT2ADDR_NE(port));
> +	else
> +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
> +	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
> +		return *(volatile unsigned char *)__port2addr_ata(port);
> +	} else
> +#endif
> +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
> +	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
> +		unsigned char b;
> +		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
> +		return b;
> +	} else
> +#endif
> +		v = *(volatile unsigned char *)PORT2ADDR(port);
> +
> +	delay();
> +	return (v);
> +}

Wouldn't it make things more maintainable if (for example) _inb_p() called
_inb() rather than duplicating it?

> @@ -0,0 +1,208 @@
> +/*
> + *  linux/arch/m32r/kernel/setup_mappi3.c
> + *
> + *  Setup routines for Renesas MAPPI-III(M3A-2170) Board
> + *
> + *  Copyright (c) 2001-2005   Hiroyuki Kondo, Hirokazu Takata,
> + *                            Hitoshi Yamamoto, Mamoru Sakugawa
> + */
> +
> ...
> +static struct hw_interrupt_type mappi3_irq_type =
> +{
> +	"MAPPI3-IRQ",
> +	startup_mappi3_irq,
> +	shutdown_mappi3_irq,
> +	enable_mappi3_irq,
> +	disable_mappi3_irq,
> +	mask_and_ack_mappi3,
> +	end_mappi3_irq
> +};

Would be nicer to use

	.name = value,


All of this code will fail to work if (for example) PCMCIA or IDE are
selected for modular build.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/