Re: PNP parallel&serial ports: module reload fails (2.6.11)?
From: Adam Belay
Date: Wed Jun 08 2005 - 19:05:21 EST
On Thu, Jun 09, 2005 at 12:29:25AM +0400, Michael Tokarev wrote:
> Adam Belay wrote:
> []
> >>>>[ it's in http://www.corpit.ru/mjt/hpml310.dsdt - apache ships it
> >>>> as Content-Type: text/plain, for some reason. I grabbed iasl
> >>>> and converted that stuff into .dsls, available at:
> >>>> http://www.corpit.ru/mjt/hpml310.dsl and
> >>>> http://www.corpit.ru/mjt/hpml150.dsl ]
> []
> > Hi,
> >
> > I'm sorry for the delayed response, as this bug is very difficult to
> > track down. The information you provided was helpful and I appreciate
> > it. I have a theory as to what is going on, and the patch below might
> > solve your problem. If not, it will at least give us some more
> > information.
>
> Well, not much of info, really.. ;)
>
> > The following would be useful:
> >
> > 1.) a complete dmesg after initial boot with the patch
> > 2.) kernel message output after "rmmod parport_pc" and "modprobe
> > parport_pc" with the patch
>
> Here it is. From HP ML 150 box. I compiled 2.6.11-rc6 with
> the patch you've sent.
>
Sorry, I forgot to set the range length, so it looped in
acpi_rs_list_to_byte_stream forever, instead of making it to _SRS.
This rediff should fix the problem.
Thanks,
Adam
--- a/drivers/pnp/pnpacpi/core.c 2005-03-02 02:38:09.000000000 -0500
+++ b/drivers/pnp/pnpacpi/core.c 2005-06-08 19:37:12.000000000 -0400
@@ -99,17 +99,21 @@
int ret = 0;
acpi_status status;
+ printk (KERN_INFO "pnp: building resource template\n");
ret = pnpacpi_build_resource_template(handle, &buffer);
if (ret)
return ret;
+ printk (KERN_INFO "pnp: encoding resources\n");
ret = pnpacpi_encode_resources(res, &buffer);
if (ret) {
kfree(buffer.pointer);
return ret;
}
+ printk (KERN_INFO "pnp: setting resources\n");
status = acpi_set_current_resources(handle, &buffer);
if (ACPI_FAILURE(status))
ret = -EINVAL;
+ printk (KERN_INFO "pnp: _SRS worked correctly\n");
kfree(buffer.pointer);
return ret;
}
--- a/drivers/pnp/pnpacpi/rsparser.c 2005-05-27 22:06:02.000000000 -0400
+++ b/drivers/pnp/pnpacpi/rsparser.c 2005-06-08 19:38:14.802869256 -0400
@@ -178,6 +178,8 @@
if (res->data.dma.number_of_channels > 0)
pnpacpi_parse_allocated_dmaresource(res_table,
res->data.dma.channels[0]);
+ else
+ printk(KERN_INFO "pnp: skipping dma from _CRS\n");
break;
case ACPI_RSTYPE_IO:
pnpacpi_parse_allocated_ioresource(res_table,
@@ -242,8 +244,10 @@
int i;
struct pnp_dma * dma;
- if (p->number_of_channels == 0)
+ if (p->number_of_channels == 0) {
+ printk(KERN_INFO "pnp: broken dma code, fix me\n");
return;
+ }
dma = pnpacpi_kmalloc(sizeof(struct pnp_dma), GFP_KERNEL);
if (!dma)
return;
@@ -298,8 +302,10 @@
int i;
struct pnp_irq * irq;
- if (p->number_of_interrupts == 0)
+ if (p->number_of_interrupts == 0) {
+ printk(KERN_INFO "pnp: broken irq code, fix me\n");
return;
+ }
irq = pnpacpi_kmalloc(sizeof(struct pnp_irq), GFP_KERNEL);
if (!irq)
return;
@@ -625,7 +631,15 @@
struct resource *p)
{
int edge_level, active_high_low;
-
+
+ if (p->flags & IORESOURCE_UNSET) {
+ printk(KERN_INFO "bug squashed - irq\n");
+ resource->id = ACPI_RSTYPE_IRQ;
+ resource->length = sizeof(struct acpi_resource);
+ resource->data.irq.number_of_interrupts = 0;
+ return;
+ }
+
decode_irq_flags(p->flags & IORESOURCE_BITS, &edge_level,
&active_high_low);
resource->id = ACPI_RSTYPE_IRQ;
@@ -636,6 +650,18 @@
resource->data.irq.shared_exclusive = ACPI_EXCLUSIVE;
else
resource->data.irq.shared_exclusive = ACPI_SHARED;
+
+ if (ACPI_EDGE_SENSITIVE == resource->data.irq.edge_level &&
+ ACPI_ACTIVE_HIGH == resource->data.irq.active_high_low &&
+ ACPI_EXCLUSIVE == resource->data.irq.shared_exclusive) {
+ printk(KERN_INFO "pnp: irq flags are correct\n");
+ } else {
+ printk(KERN_INFO "pnp: attempting to fix irq flags\n");
+ resource->data.irq.edge_level = ACPI_EDGE_SENSITIVE;
+ resource->data.irq.active_high_low = ACPI_ACTIVE_HIGH;
+ resource->data.irq.shared_exclusive = ACPI_EXCLUSIVE;
+ }
+
resource->data.irq.number_of_interrupts = 1;
resource->data.irq.interrupts[0] = p->start;
}
@@ -644,6 +670,14 @@
struct resource *p)
{
int edge_level, active_high_low;
+
+ if (p->flags & IORESOURCE_UNSET) {
+ printk(KERN_INFO "bug squashed - irq_ext\n");
+ resource->id = ACPI_RSTYPE_EXT_IRQ;
+ resource->length = sizeof(struct acpi_resource);
+ resource->data.extended_irq.number_of_interrupts = 0;
+ return;
+ }
decode_irq_flags(p->flags & IORESOURCE_BITS, &edge_level,
&active_high_low);
@@ -663,6 +697,14 @@
static void pnpacpi_encode_dma(struct acpi_resource *resource,
struct resource *p)
{
+ if (p->flags & IORESOURCE_UNSET) {
+ printk(KERN_INFO "bug squashed - dma \n");
+ resource->id = ACPI_RSTYPE_DMA;
+ resource->length = sizeof(struct acpi_resource);
+ resource->data.dma.number_of_channels = 0;
+ return;
+ }
+
resource->id = ACPI_RSTYPE_DMA;
resource->length = sizeof(struct acpi_resource);
/* Note: pnp_assign_dma will copy pnp_dma->flags into p->flags */
@@ -695,7 +737,6 @@
ACPI_DECODE_16 : ACPI_DECODE_10;
resource->data.io.min_base_address = p->start;
resource->data.io.max_base_address = p->end;
- resource->data.io.alignment = 0; /* Correct? */
resource->data.io.range_length = p->end - p->start + 1;
}
@@ -719,7 +760,6 @@
ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY;
resource->data.memory24.min_base_address = p->start;
resource->data.memory24.max_base_address = p->end;
- resource->data.memory24.alignment = 0;
resource->data.memory24.range_length = p->end - p->start + 1;
}
@@ -733,7 +773,6 @@
ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY;
resource->data.memory32.min_base_address = p->start;
resource->data.memory32.max_base_address = p->end;
- resource->data.memory32.alignment = 0;
resource->data.memory32.range_length = p->end - p->start + 1;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/