Re: bonding driver issues: slave interface not coming up

[John Jasen]

On Mon, 27 Jun 2005, Jason R. Martin wrote:

> What's in /proc/net/bonding/bond0?

before a successful ifdown/ifup bond0:

Ethernet Channel Bonding Driver: v2.6.0 (January 14, 2004)

Bonding Mode: load balancing (xor)
MII Status: up
MII Polling Interval (ms): 1000
Up Delay (ms): 0
Down Delay (ms): 3000

Slave Interface: eth0
MII Status: down
Link Failure Count: 1
Permanent HW addr: 00:09:3d:11:8d:93

Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:09:3d:11:8d:94

after a successful ifdown/ifup bond0:
Ethernet Channel Bonding Driver: v2.6.0 (January 14, 2004)

Bonding Mode: load balancing (xor)
MII Status: up
MII Polling Interval (ms): 1000
Up Delay (ms): 0
Down Delay (ms): 3000

Slave Interface: eth0
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:09:3d:11:8d:93

Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:09:3d:11:8d:94

> You'll probably have better luck getting help with this issue on
> netdev@xxxxxxxxxxxxxxx and bonding-devel@xxxxxxxxxxxxxxxxxxxxxx

Thanks. I will email them shortly.

--
-- John E. Jasen (jjasen@xxxxxxxxxxxxxxxxxx)
-- No one will sorrow for me when I die, because those who would
-- are dead already. -- Lan Mandragoran, The Wheel of Time, New Spring
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/