[RFC] Atmel-supplied hardware headers for AT91RM9200 SoC processor
From: Andrew Victor
Date: Thu Jul 07 2005 - 05:03:04 EST
hi,
I am attempting to submit code for inclusion in the mainline kernel to
support the Atmel AT91RM9200 SoC processor, and the various boards that
use that processor. Since it's based on an ARM9 core, I submitted the
patches to Russell King.
While he seems generally happy with most of the code, he has doubts
about merging the Atmel-supplied headers and suggested I post this to
the linux-kernel list for a wider review.
While I agree that their usage of structs/coding-style is not the
cleanest/Linux way of doing things, re-using their headers is useful
since:
1) they are supplied by the hardware manufacturer.
2) Atmel automatically generates them from their chip design database,
so they should be correct.
3) they are used by most AT91RM9200 developers, not just those using
Linux.
This gives the benefit that there is a larger 'installed base', and
Atmel has to take the responsibility that it is correct. I don't
believe that Atmel will change the format of their hardware headers
specifically for Linux.
If the AT91RM9200+Linux community had to convert all the headers, bugs
may be introduced in the conversion process and we would have to assume
any maintenance responsibility. What we have now may be slightly ugly,
but it is atleast known to be correct.
As suggested by Russell King, I even added a warning message that these
headers should not be used as an example of how things should be done in
new implementations.
I've appended two of their headers as an example - the System
peripherals (timer, interrupt controller, etc) and Ethernet.
Comments?
For those who might be interested, the full AT91RM9200 patches are
available from http://maxim.org.za/AT91RM9200/2.6/
Regards,
Andrew Victor
diff -urN linux-2.6.13-rc2.orig/include/asm-arm/arch-at91rm9200/AT91RM9200_EMAC.h linux-2.6.13-rc2/include/asm-arm/arch-at91rm9200/AT91RM9200_EMAC.h
--- linux-2.6.13-rc2.orig/include/asm-arm/arch-at91rm9200/AT91RM9200_EMAC.h Thu Jan 1 02:00:00 1970
+++ linux-2.6.13-rc2/include/asm-arm/arch-at91rm9200/AT91RM9200_EMAC.h Thu Jul 7 09:41:13 2005
@@ -0,0 +1,169 @@
+// ----------------------------------------------------------------------------
+// ATMEL Microcontroller Software Support - ROUSSET -
+// ----------------------------------------------------------------------------
+// Copyright (c) 2004, Atmel Corporation
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+// - Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the disclaimer below.
+// - Redistributions in binary form must reproduce the above copyright notice,
+// this list of conditions and the disclaimer below in the documentation and/or
+// other materials provided with the distribution.
+//
+// Atmel's name may not be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+// ----------------------------------------------------------------------------
+// File Name : AT91RM9200.h
+// Object : AT91RM9200 / EMAC definitions
+// Generated : AT91 SW Application Group 01/17/2003 (13:41:21)
+//
+// ----------------------------------------------------------------------------
+
+/*
+ * NOTE: These headers are automatically generated from Atmel's chip design
+ * database. They are not in the Linux standard format, and SHOULD NOT be
+ * used as an example for new implementations.
+ */
+
+#ifndef AT91RM9200_EMAC_H
+#define AT91RM9200_EMAC_H
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Ethernet MAC
+// *****************************************************************************
+#ifndef __ASSEMBLY__
+
+typedef struct _AT91S_EMAC {
+ AT91_REG EMAC_CTL; // Network Control Register
+ AT91_REG EMAC_CFG; // Network Configuration Register
+ AT91_REG EMAC_SR; // Network Status Register
+ AT91_REG EMAC_TAR; // Transmit Address Register
+ AT91_REG EMAC_TCR; // Transmit Control Register
+ AT91_REG EMAC_TSR; // Transmit Status Register
+ AT91_REG EMAC_RBQP; // Receive Buffer Queue Pointer
+ AT91_REG Reserved0[1]; //
+ AT91_REG EMAC_RSR; // Receive Status Register
+ AT91_REG EMAC_ISR; // Interrupt Status Register
+ AT91_REG EMAC_IER; // Interrupt Enable Register
+ AT91_REG EMAC_IDR; // Interrupt Disable Register
+ AT91_REG EMAC_IMR; // Interrupt Mask Register
+ AT91_REG EMAC_MAN; // PHY Maintenance Register
+ AT91_REG Reserved1[2]; //
+ AT91_REG EMAC_FRA; // Frames Transmitted OK Register
+ AT91_REG EMAC_SCOL; // Single Collision Frame Register
+ AT91_REG EMAC_MCOL; // Multiple Collision Frame Register
+ AT91_REG EMAC_OK; // Frames Received OK Register
+ AT91_REG EMAC_SEQE; // Frame Check Sequence Error Register
+ AT91_REG EMAC_ALE; // Alignment Error Register
+ AT91_REG EMAC_DTE; // Deferred Transmission Frame Register
+ AT91_REG EMAC_LCOL; // Late Collision Register
+ AT91_REG EMAC_ECOL; // Excessive Collision Register
+ AT91_REG EMAC_CSE; // Carrier Sense Error Register
+ AT91_REG EMAC_TUE; // Transmit Underrun Error Register
+ AT91_REG EMAC_CDE; // Code Error Register
+ AT91_REG EMAC_ELR; // Excessive Length Error Register
+ AT91_REG EMAC_RJB; // Receive Jabber Register
+ AT91_REG EMAC_USF; // Undersize Frame Register
+ AT91_REG EMAC_SQEE; // SQE Test Error Register
+ AT91_REG EMAC_DRFC; // Discarded RX Frame Register
+ AT91_REG Reserved2[3]; //
+ AT91_REG EMAC_HSH; // Hash Address High[63:32]
+ AT91_REG EMAC_HSL; // Hash Address Low[31:0]
+ AT91_REG EMAC_SA1L; // Specific Address 1 Low, First 4 bytes
+ AT91_REG EMAC_SA1H; // Specific Address 1 High, Last 2 bytes
+ AT91_REG EMAC_SA2L; // Specific Address 2 Low, First 4 bytes
+ AT91_REG EMAC_SA2H; // Specific Address 2 High, Last 2 bytes
+ AT91_REG EMAC_SA3L; // Specific Address 3 Low, First 4 bytes
+ AT91_REG EMAC_SA3H; // Specific Address 3 High, Last 2 bytes
+ AT91_REG EMAC_SA4L; // Specific Address 4 Low, First 4 bytes
+ AT91_REG EMAC_SA4H; // Specific Address 4 High, Last 2 bytesr
+} AT91S_EMAC, *AT91PS_EMAC;
+
+#endif
+
+// -------- EMAC_CTL : (EMAC Offset: 0x0) --------
+#define AT91C_EMAC_LB ( 0x1 << 0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level.
+#define AT91C_EMAC_LBL ( 0x1 << 1) // (EMAC) Loopback local.
+#define AT91C_EMAC_RE ( 0x1 << 2) // (EMAC) Receive enable.
+#define AT91C_EMAC_TE ( 0x1 << 3) // (EMAC) Transmit enable.
+#define AT91C_EMAC_MPE ( 0x1 << 4) // (EMAC) Management port enable.
+#define AT91C_EMAC_CSR ( 0x1 << 5) // (EMAC) Clear statistics registers.
+#define AT91C_EMAC_ISR ( 0x1 << 6) // (EMAC) Increment statistics registers.
+#define AT91C_EMAC_WES ( 0x1 << 7) // (EMAC) Write enable for statistics registers.
+#define AT91C_EMAC_BP ( 0x1 << 8) // (EMAC) Back pressure.
+// -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register --------
+#define AT91C_EMAC_SPD ( 0x1 << 0) // (EMAC) Speed.
+#define AT91C_EMAC_FD ( 0x1 << 1) // (EMAC) Full duplex.
+#define AT91C_EMAC_BR ( 0x1 << 2) // (EMAC) Bit rate.
+#define AT91C_EMAC_CAF ( 0x1 << 4) // (EMAC) Copy all frames.
+#define AT91C_EMAC_NBC ( 0x1 << 5) // (EMAC) No broadcast.
+#define AT91C_EMAC_MTI ( 0x1 << 6) // (EMAC) Multicast hash enable
+#define AT91C_EMAC_UNI ( 0x1 << 7) // (EMAC) Unicast hash enable.
+#define AT91C_EMAC_BIG ( 0x1 << 8) // (EMAC) Receive 1522 bytes.
+#define AT91C_EMAC_EAE ( 0x1 << 9) // (EMAC) External address match enable.
+#define AT91C_EMAC_CLK ( 0x3 << 10) // (EMAC)
+#define AT91C_EMAC_CLK_HCLK_8 ( 0x0 << 10) // (EMAC) HCLK divided by 8
+#define AT91C_EMAC_CLK_HCLK_16 ( 0x1 << 10) // (EMAC) HCLK divided by 16
+#define AT91C_EMAC_CLK_HCLK_32 ( 0x2 << 10) // (EMAC) HCLK divided by 32
+#define AT91C_EMAC_CLK_HCLK_64 ( 0x3 << 10) // (EMAC) HCLK divided by 64
+#define AT91C_EMAC_RTY ( 0x1 << 12) // (EMAC)
+#define AT91C_EMAC_RMII ( 0x1 << 13) // (EMAC)
+// -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register --------
+#define AT91C_EMAC_MDIO ( 0x1 << 1) // (EMAC)
+#define AT91C_EMAC_IDLE ( 0x1 << 2) // (EMAC)
+// -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register --------
+#define AT91C_EMAC_LEN ( 0x7FF << 0) // (EMAC)
+#define AT91C_EMAC_NCRC ( 0x1 << 15) // (EMAC)
+// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register --------
+#define AT91C_EMAC_OVR ( 0x1 << 0) // (EMAC)
+#define AT91C_EMAC_COL ( 0x1 << 1) // (EMAC)
+#define AT91C_EMAC_RLE ( 0x1 << 2) // (EMAC)
+#define AT91C_EMAC_TXIDLE ( 0x1 << 3) // (EMAC)
+#define AT91C_EMAC_BNQ ( 0x1 << 4) // (EMAC)
+#define AT91C_EMAC_COMP ( 0x1 << 5) // (EMAC)
+#define AT91C_EMAC_UND ( 0x1 << 6) // (EMAC)
+// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register --------
+#define AT91C_EMAC_BNA ( 0x1 << 0) // (EMAC)
+#define AT91C_EMAC_REC ( 0x1 << 1) // (EMAC)
+// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register --------
+#define AT91C_EMAC_DONE ( 0x1 << 0) // (EMAC)
+#define AT91C_EMAC_RCOM ( 0x1 << 1) // (EMAC)
+#define AT91C_EMAC_RBNA ( 0x1 << 2) // (EMAC)
+#define AT91C_EMAC_TOVR ( 0x1 << 3) // (EMAC)
+#define AT91C_EMAC_TUND ( 0x1 << 4) // (EMAC)
+#define AT91C_EMAC_RTRY ( 0x1 << 5) // (EMAC)
+#define AT91C_EMAC_TBRE ( 0x1 << 6) // (EMAC)
+#define AT91C_EMAC_TCOM ( 0x1 << 7) // (EMAC)
+#define AT91C_EMAC_TIDLE ( 0x1 << 8) // (EMAC)
+#define AT91C_EMAC_LINK ( 0x1 << 9) // (EMAC)
+#define AT91C_EMAC_ROVR ( 0x1 << 10) // (EMAC)
+#define AT91C_EMAC_HRESP ( 0x1 << 11) // (EMAC)
+// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register --------
+// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register --------
+// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register --------
+// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register --------
+#define AT91C_EMAC_DATA ( 0xFFFF << 0) // (EMAC)
+#define AT91C_EMAC_CODE ( 0x3 << 16) // (EMAC)
+#define AT91C_EMAC_CODE_802_3 ( 0x2 << 16) // (EMAC) Write Operation
+#define AT91C_EMAC_REGA ( 0x1F << 18) // (EMAC)
+#define AT91C_EMAC_PHYA ( 0x1F << 23) // (EMAC)
+#define AT91C_EMAC_RW ( 0x3 << 28) // (EMAC)
+#define AT91C_EMAC_RW_R ( 0x2 << 28) // (EMAC) Read Operation
+#define AT91C_EMAC_RW_W ( 0x1 << 28) // (EMAC) Write Operation
+#define AT91C_EMAC_HIGH ( 0x1 << 30) // (EMAC)
+#define AT91C_EMAC_LOW ( 0x1 << 31) // (EMAC)
+
+#endif
diff -urN linux-2.6.13-rc2.orig/include/asm-arm/arch-at91rm9200/AT91RM9200_SYS.h linux-2.6.13-rc2/include/asm-arm/arch-at91rm9200/AT91RM9200_SYS.h
--- linux-2.6.13-rc2.orig/include/asm-arm/arch-at91rm9200/AT91RM9200_SYS.h Thu Jan 1 02:00:00 1970
+++ linux-2.6.13-rc2/include/asm-arm/arch-at91rm9200/AT91RM9200_SYS.h Thu Jul 7 09:46:49 2005
@@ -0,0 +1,744 @@
+// ----------------------------------------------------------------------------
+// ATMEL Microcontroller Software Support - ROUSSET -
+// ----------------------------------------------------------------------------
+// Copyright (c) 2004, Atmel Corporation
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are met:
+// - Redistributions of source code must retain the above copyright notice,
+// this list of conditions and the disclaimer below.
+// - Redistributions in binary form must reproduce the above copyright notice,
+// this list of conditions and the disclaimer below in the documentation and/or
+// other materials provided with the distribution.
+//
+// Atmel's name may not be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+// ----------------------------------------------------------------------------
+// File Name : AT91RM9200.h
+// Object : AT91RM9200 definitions
+// Generated : AT91 SW Application Group 04/16/2003 (12:30:06)
+//
+// ----------------------------------------------------------------------------
+
+/*
+ * NOTE: These headers are automatically generated from Atmel's chip design
+ * database. They are not in the Linux standard format, and SHOULD NOT be
+ * used as an example for new implementations.
+ */
+
+#ifndef AT91RM9200_SYS_H
+#define AT91RM9200_SYS_H
+
+#ifndef __ASSEMBLY__
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR System Peripherals
+// *****************************************************************************
+typedef struct _AT91S_SYS {
+ AT91_REG AIC_SMR[32]; // Source Mode Register
+ AT91_REG AIC_SVR[32]; // Source Vector Register
+ AT91_REG AIC_IVR; // IRQ Vector Register
+ AT91_REG AIC_FVR; // FIQ Vector Register
+ AT91_REG AIC_ISR; // Interrupt Status Register
+ AT91_REG AIC_IPR; // Interrupt Pending Register
+ AT91_REG AIC_IMR; // Interrupt Mask Register
+ AT91_REG AIC_CISR; // Core Interrupt Status Register
+ AT91_REG Reserved0[2]; //
+ AT91_REG AIC_IECR; // Interrupt Enable Command Register
+ AT91_REG AIC_IDCR; // Interrupt Disable Command Register
+ AT91_REG AIC_ICCR; // Interrupt Clear Command Register
+ AT91_REG AIC_ISCR; // Interrupt Set Command Register
+ AT91_REG AIC_EOICR; // End of Interrupt Command Register
+ AT91_REG AIC_SPU; // Spurious Vector Register
+ AT91_REG AIC_DCR; // Debug Control Register (Protect)
+ AT91_REG Reserved1[1]; //
+ AT91_REG AIC_FFER; // Fast Forcing Enable Register
+ AT91_REG AIC_FFDR; // Fast Forcing Disable Register
+ AT91_REG AIC_FFSR; // Fast Forcing Status Register
+ AT91_REG Reserved2[45]; //
+ AT91_REG DBGU_CR; // Control Register
+ AT91_REG DBGU_MR; // Mode Register
+ AT91_REG DBGU_IER; // Interrupt Enable Register
+ AT91_REG DBGU_IDR; // Interrupt Disable Register
+ AT91_REG DBGU_IMR; // Interrupt Mask Register
+ AT91_REG DBGU_CSR; // Channel Status Register
+ AT91_REG DBGU_RHR; // Receiver Holding Register
+ AT91_REG DBGU_THR; // Transmitter Holding Register
+ AT91_REG DBGU_BRGR; // Baud Rate Generator Register
+ AT91_REG Reserved3[7]; //
+ AT91_REG DBGU_C1R; // Chip ID1 Register
+ AT91_REG DBGU_C2R; // Chip ID2 Register
+ AT91_REG DBGU_FNTR; // Force NTRST Register
+ AT91_REG Reserved4[45]; //
+ AT91_REG DBGU_RPR; // Receive Pointer Register
+ AT91_REG DBGU_RCR; // Receive Counter Register
+ AT91_REG DBGU_TPR; // Transmit Pointer Register
+ AT91_REG DBGU_TCR; // Transmit Counter Register
+ AT91_REG DBGU_RNPR; // Receive Next Pointer Register
+ AT91_REG DBGU_RNCR; // Receive Next Counter Register
+ AT91_REG DBGU_TNPR; // Transmit Next Pointer Register
+ AT91_REG DBGU_TNCR; // Transmit Next Counter Register
+ AT91_REG DBGU_PTCR; // PDC Transfer Control Register
+ AT91_REG DBGU_PTSR; // PDC Transfer Status Register
+ AT91_REG Reserved5[54]; //
+ AT91_REG PIOA_PER; // PIO Enable Register
+ AT91_REG PIOA_PDR; // PIO Disable Register
+ AT91_REG PIOA_PSR; // PIO Status Register
+ AT91_REG Reserved6[1]; //
+ AT91_REG PIOA_OER; // Output Enable Register
+ AT91_REG PIOA_ODR; // Output Disable Registerr
+ AT91_REG PIOA_OSR; // Output Status Register
+ AT91_REG Reserved7[1]; //
+ AT91_REG PIOA_IFER; // Input Filter Enable Register
+ AT91_REG PIOA_IFDR; // Input Filter Disable Register
+ AT91_REG PIOA_IFSR; // Input Filter Status Register
+ AT91_REG Reserved8[1]; //
+ AT91_REG PIOA_SODR; // Set Output Data Register
+ AT91_REG PIOA_CODR; // Clear Output Data Register
+ AT91_REG PIOA_ODSR; // Output Data Status Register
+ AT91_REG PIOA_PDSR; // Pin Data Status Register
+ AT91_REG PIOA_IER; // Interrupt Enable Register
+ AT91_REG PIOA_IDR; // Interrupt Disable Register
+ AT91_REG PIOA_IMR; // Interrupt Mask Register
+ AT91_REG PIOA_ISR; // Interrupt Status Register
+ AT91_REG PIOA_MDER; // Multi-driver Enable Register
+ AT91_REG PIOA_MDDR; // Multi-driver Disable Register
+ AT91_REG PIOA_MDSR; // Multi-driver Status Register
+ AT91_REG Reserved9[1]; //
+ AT91_REG PIOA_PPUDR; // Pull-up Disable Register
+ AT91_REG PIOA_PPUER; // Pull-up Enable Register
+ AT91_REG PIOA_PPUSR; // Pad Pull-up Status Register
+ AT91_REG Reserved10[1]; //
+ AT91_REG PIOA_ASR; // Select A Register
+ AT91_REG PIOA_BSR; // Select B Register
+ AT91_REG PIOA_ABSR; // AB Select Status Register
+ AT91_REG Reserved11[9]; //
+ AT91_REG PIOA_OWER; // Output Write Enable Register
+ AT91_REG PIOA_OWDR; // Output Write Disable Register
+ AT91_REG PIOA_OWSR; // Output Write Status Register
+ AT91_REG Reserved12[85]; //
+ AT91_REG PIOB_PER; // PIO Enable Register
+ AT91_REG PIOB_PDR; // PIO Disable Register
+ AT91_REG PIOB_PSR; // PIO Status Register
+ AT91_REG Reserved13[1]; //
+ AT91_REG PIOB_OER; // Output Enable Register
+ AT91_REG PIOB_ODR; // Output Disable Registerr
+ AT91_REG PIOB_OSR; // Output Status Register
+ AT91_REG Reserved14[1]; //
+ AT91_REG PIOB_IFER; // Input Filter Enable Register
+ AT91_REG PIOB_IFDR; // Input Filter Disable Register
+ AT91_REG PIOB_IFSR; // Input Filter Status Register
+ AT91_REG Reserved15[1]; //
+ AT91_REG PIOB_SODR; // Set Output Data Register
+ AT91_REG PIOB_CODR; // Clear Output Data Register
+ AT91_REG PIOB_ODSR; // Output Data Status Register
+ AT91_REG PIOB_PDSR; // Pin Data Status Register
+ AT91_REG PIOB_IER; // Interrupt Enable Register
+ AT91_REG PIOB_IDR; // Interrupt Disable Register
+ AT91_REG PIOB_IMR; // Interrupt Mask Register
+ AT91_REG PIOB_ISR; // Interrupt Status Register
+ AT91_REG PIOB_MDER; // Multi-driver Enable Register
+ AT91_REG PIOB_MDDR; // Multi-driver Disable Register
+ AT91_REG PIOB_MDSR; // Multi-driver Status Register
+ AT91_REG Reserved16[1]; //
+ AT91_REG PIOB_PPUDR; // Pull-up Disable Register
+ AT91_REG PIOB_PPUER; // Pull-up Enable Register
+ AT91_REG PIOB_PPUSR; // Pad Pull-up Status Register
+ AT91_REG Reserved17[1]; //
+ AT91_REG PIOB_ASR; // Select A Register
+ AT91_REG PIOB_BSR; // Select B Register
+ AT91_REG PIOB_ABSR; // AB Select Status Register
+ AT91_REG Reserved18[9]; //
+ AT91_REG PIOB_OWER; // Output Write Enable Register
+ AT91_REG PIOB_OWDR; // Output Write Disable Register
+ AT91_REG PIOB_OWSR; // Output Write Status Register
+ AT91_REG Reserved19[85]; //
+ AT91_REG PIOC_PER; // PIO Enable Register
+ AT91_REG PIOC_PDR; // PIO Disable Register
+ AT91_REG PIOC_PSR; // PIO Status Register
+ AT91_REG Reserved20[1]; //
+ AT91_REG PIOC_OER; // Output Enable Register
+ AT91_REG PIOC_ODR; // Output Disable Registerr
+ AT91_REG PIOC_OSR; // Output Status Register
+ AT91_REG Reserved21[1]; //
+ AT91_REG PIOC_IFER; // Input Filter Enable Register
+ AT91_REG PIOC_IFDR; // Input Filter Disable Register
+ AT91_REG PIOC_IFSR; // Input Filter Status Register
+ AT91_REG Reserved22[1]; //
+ AT91_REG PIOC_SODR; // Set Output Data Register
+ AT91_REG PIOC_CODR; // Clear Output Data Register
+ AT91_REG PIOC_ODSR; // Output Data Status Register
+ AT91_REG PIOC_PDSR; // Pin Data Status Register
+ AT91_REG PIOC_IER; // Interrupt Enable Register
+ AT91_REG PIOC_IDR; // Interrupt Disable Register
+ AT91_REG PIOC_IMR; // Interrupt Mask Register
+ AT91_REG PIOC_ISR; // Interrupt Status Register
+ AT91_REG PIOC_MDER; // Multi-driver Enable Register
+ AT91_REG PIOC_MDDR; // Multi-driver Disable Register
+ AT91_REG PIOC_MDSR; // Multi-driver Status Register
+ AT91_REG Reserved23[1]; //
+ AT91_REG PIOC_PPUDR; // Pull-up Disable Register
+ AT91_REG PIOC_PPUER; // Pull-up Enable Register
+ AT91_REG PIOC_PPUSR; // Pad Pull-up Status Register
+ AT91_REG Reserved24[1]; //
+ AT91_REG PIOC_ASR; // Select A Register
+ AT91_REG PIOC_BSR; // Select B Register
+ AT91_REG PIOC_ABSR; // AB Select Status Register
+ AT91_REG Reserved25[9]; //
+ AT91_REG PIOC_OWER; // Output Write Enable Register
+ AT91_REG PIOC_OWDR; // Output Write Disable Register
+ AT91_REG PIOC_OWSR; // Output Write Status Register
+ AT91_REG Reserved26[85]; //
+ AT91_REG PIOD_PER; // PIO Enable Register
+ AT91_REG PIOD_PDR; // PIO Disable Register
+ AT91_REG PIOD_PSR; // PIO Status Register
+ AT91_REG Reserved27[1]; //
+ AT91_REG PIOD_OER; // Output Enable Register
+ AT91_REG PIOD_ODR; // Output Disable Registerr
+ AT91_REG PIOD_OSR; // Output Status Register
+ AT91_REG Reserved28[1]; //
+ AT91_REG PIOD_IFER; // Input Filter Enable Register
+ AT91_REG PIOD_IFDR; // Input Filter Disable Register
+ AT91_REG PIOD_IFSR; // Input Filter Status Register
+ AT91_REG Reserved29[1]; //
+ AT91_REG PIOD_SODR; // Set Output Data Register
+ AT91_REG PIOD_CODR; // Clear Output Data Register
+ AT91_REG PIOD_ODSR; // Output Data Status Register
+ AT91_REG PIOD_PDSR; // Pin Data Status Register
+ AT91_REG PIOD_IER; // Interrupt Enable Register
+ AT91_REG PIOD_IDR; // Interrupt Disable Register
+ AT91_REG PIOD_IMR; // Interrupt Mask Register
+ AT91_REG PIOD_ISR; // Interrupt Status Register
+ AT91_REG PIOD_MDER; // Multi-driver Enable Register
+ AT91_REG PIOD_MDDR; // Multi-driver Disable Register
+ AT91_REG PIOD_MDSR; // Multi-driver Status Register
+ AT91_REG Reserved30[1]; //
+ AT91_REG PIOD_PPUDR; // Pull-up Disable Register
+ AT91_REG PIOD_PPUER; // Pull-up Enable Register
+ AT91_REG PIOD_PPUSR; // Pad Pull-up Status Register
+ AT91_REG Reserved31[1]; //
+ AT91_REG PIOD_ASR; // Select A Register
+ AT91_REG PIOD_BSR; // Select B Register
+ AT91_REG PIOD_ABSR; // AB Select Status Register
+ AT91_REG Reserved32[9]; //
+ AT91_REG PIOD_OWER; // Output Write Enable Register
+ AT91_REG PIOD_OWDR; // Output Write Disable Register
+ AT91_REG PIOD_OWSR; // Output Write Status Register
+ AT91_REG Reserved33[85]; //
+ AT91_REG PMC_SCER; // System Clock Enable Register
+ AT91_REG PMC_SCDR; // System Clock Disable Register
+ AT91_REG PMC_SCSR; // System Clock Status Register
+ AT91_REG Reserved34[1]; //
+ AT91_REG PMC_PCER; // Peripheral Clock Enable Register
+ AT91_REG PMC_PCDR; // Peripheral Clock Disable Register
+ AT91_REG PMC_PCSR; // Peripheral Clock Status Register
+ AT91_REG Reserved35[1]; //
+ AT91_REG CKGR_MOR; // Main Oscillator Register
+ AT91_REG CKGR_MCFR; // Main Clock Frequency Register
+ AT91_REG CKGR_PLLAR; // PLL A Register
+ AT91_REG CKGR_PLLBR; // PLL B Register
+ AT91_REG PMC_MCKR; // Master Clock Register
+ AT91_REG Reserved36[3]; //
+ AT91_REG PMC_PCKR[8]; // Programmable Clock Register
+ AT91_REG PMC_IER; // Interrupt Enable Register
+ AT91_REG PMC_IDR; // Interrupt Disable Register
+ AT91_REG PMC_SR; // Status Register
+ AT91_REG PMC_IMR; // Interrupt Mask Register
+ AT91_REG Reserved37[36]; //
+ AT91_REG ST_CR; // Control Register
+ AT91_REG ST_PIMR; // Period Interval Mode Register
+ AT91_REG ST_WDMR; // Watchdog Mode Register
+ AT91_REG ST_RTMR; // Real-time Mode Register
+ AT91_REG ST_SR; // Status Register
+ AT91_REG ST_IER; // Interrupt Enable Register
+ AT91_REG ST_IDR; // Interrupt Disable Register
+ AT91_REG ST_IMR; // Interrupt Mask Register
+ AT91_REG ST_RTAR; // Real-time Alarm Register
+ AT91_REG ST_CRTR; // Current Real-time Register
+ AT91_REG Reserved38[54]; //
+ AT91_REG RTC_CR; // Control Register
+ AT91_REG RTC_MR; // Mode Register
+ AT91_REG RTC_TIMR; // Time Register
+ AT91_REG RTC_CALR; // Calendar Register
+ AT91_REG RTC_TIMALR; // Time Alarm Register
+ AT91_REG RTC_CALALR; // Calendar Alarm Register
+ AT91_REG RTC_SR; // Status Register
+ AT91_REG RTC_SCCR; // Status Clear Command Register
+ AT91_REG RTC_IER; // Interrupt Enable Register
+ AT91_REG RTC_IDR; // Interrupt Disable Register
+ AT91_REG RTC_IMR; // Interrupt Mask Register
+ AT91_REG RTC_VER; // Valid Entry Register
+ AT91_REG Reserved39[52]; //
+ AT91_REG MC_RCR; // MC Remap Control Register
+ AT91_REG MC_ASR; // MC Abort Status Register
+ AT91_REG MC_AASR; // MC Abort Address Status Register
+ AT91_REG Reserved40[1]; //
+ AT91_REG MC_PUIA[16]; // MC Protection Unit Area
+ AT91_REG MC_PUP; // MC Protection Unit Peripherals
+ AT91_REG MC_PUER; // MC Protection Unit Enable Register
+ AT91_REG Reserved41[2]; //
+ AT91_REG EBI_CSA; // Chip Select Assignment Register
+ AT91_REG EBI_CFGR; // Configuration Register
+ AT91_REG Reserved42[2]; //
+ AT91_REG EBI_SMC2_CSR[8]; // SMC2 Chip Select Register
+ AT91_REG EBI_SDRC_MR; // SDRAM Controller Mode Register
+ AT91_REG EBI_SDRC_TR; // SDRAM Controller Refresh Timer Register
+ AT91_REG EBI_SDRC_CR; // SDRAM Controller Configuration Register
+ AT91_REG EBI_SDRC_SRR; // SDRAM Controller Self Refresh Register
+ AT91_REG EBI_SDRC_LPR; // SDRAM Controller Low Power Register
+ AT91_REG EBI_SDRC_IER; // SDRAM Controller Interrupt Enable Register
+ AT91_REG EBI_SDRC_IDR; // SDRAM Controller Interrupt Disable Register
+ AT91_REG EBI_SDRC_IMR; // SDRAM Controller Interrupt Mask Register
+ AT91_REG EBI_SDRC_ISR; // SDRAM Controller Interrupt Mask Register
+ AT91_REG Reserved43[3]; //
+ AT91_REG EBI_BFC_MR; // BFC Mode Register
+} AT91S_SYS, *AT91PS_SYS;
+
+#else
+
+/* Offsets from AT91C_BASE_SYS */
+#define AIC_SMR (0) // Source Mode Register
+#define AIC_SVR (128) // Source Vector Register
+#define AIC_IVR (256) // IRQ Vector Register
+#define AIC_FVR (260) // FIQ Vector Register
+#define AIC_ISR (264) // Interrupt Status Register
+#define AIC_IPR (268) // Interrupt Pending Register
+#define AIC_IMR (272) // Interrupt Mask Register
+#define AIC_CISR (276) // Core Interrupt Status Register
+#define AIC_IECR (288) // Interrupt Enable Command Register
+#define AIC_IDCR (292) // Interrupt Disable Command Register
+#define AIC_ICCR (296) // Interrupt Clear Command Register
+#define AIC_ISCR (300) // Interrupt Set Command Register
+#define AIC_EOICR (304) // End of Interrupt Command Register
+#define AIC_SPU (308) // Spurious Vector Register
+#define AIC_DCR (312) // Debug Control Register (Protect)
+#define AIC_FFER (320) // Fast Forcing Enable Register
+#define AIC_FFDR (324) // Fast Forcing Disable Register
+#define AIC_FFSR (328) // Fast Forcing Status Register
+
+/* Offsets from AT91C_BASE_SYS */
+#define DBGU_CR (0x200 + 0) // Control Register
+#define DBGU_MR (0x200 + 4) // Mode Register
+#define DBGU_IER (0x200 + 8) // Interrupt Enable Register
+#define DBGU_IDR (0x200 + 12) // Interrupt Disable Register
+#define DBGU_IMR (0x200 + 16) // Interrupt Mask Register
+#define DBGU_CSR (0x200 + 20) // Channel Status Register
+#define DBGU_RHR (0x200 + 24) // Receiver Holding Register
+#define DBGU_THR (0x200 + 28) // Transmitter Holding Register
+#define DBGU_BRGR (0x200 + 32) // Baud Rate Generator Register
+#define DBGU_C1R (0x200 + 64) // Chip ID1 Register
+#define DBGU_C2R (0x200 + 68) // Chip ID2 Register
+#define DBGU_FNTR (0x200 + 72) // Force NTRST Register
+#define DBGU_RPR (0x200 + 256) // Receive Pointer Register
+#define DBGU_RCR (0x200 + 260) // Receive Counter Register
+#define DBGU_TPR (0x200 + 264) // Transmit Pointer Register
+#define DBGU_TCR (0x200 + 268) // Transmit Counter Register
+#define DBGU_RNPR (0x200 + 272) // Receive Next Pointer Register
+#define DBGU_RNCR (0x200 + 276) // Receive Next Counter Register
+#define DBGU_TNPR (0x200 + 280) // Transmit Next Pointer Register
+#define DBGU_TNCR (0x200 + 284) // Transmit Next Counter Register
+#define DBGU_PTCR (0x200 + 288) // PDC Transfer Control Register
+#define DBGU_PTSR (0x200 + 292) // PDC Transfer Status Register
+
+#endif // __ASSEMBLY
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Memory Controller Interface
+// *****************************************************************************
+// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register --------
+#define AT91C_MC_RCB (0x1 << 0) // (MC) Remap Command Bit
+// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register --------
+#define AT91C_MC_UNDADD (0x1 << 0) // (MC) Undefined Addess Abort Status
+#define AT91C_MC_MISADD (0x1 << 1) // (MC) Misaligned Addess Abort Status
+#define AT91C_MC_MPU (0x1 << 2) // (MC) Memory protection Unit Abort Status
+#define AT91C_MC_ABTSZ (0x3 << 8) // (MC) Abort Size Status
+#define AT91C_MC_ABTSZ_BYTE (0x0 << 8) // (MC) Byte
+#define AT91C_MC_ABTSZ_HWORD (0x1 << 8) // (MC) Half-word
+#define AT91C_MC_ABTSZ_WORD (0x2 << 8) // (MC) Word
+#define AT91C_MC_ABTTYP (0x3 << 10) // (MC) Abort Type Status
+#define AT91C_MC_ABTTYP_DATAR (0x0 << 10) // (MC) Data Read
+#define AT91C_MC_ABTTYP_DATAW (0x1 << 10) // (MC) Data Write
+#define AT91C_MC_ABTTYP_FETCH (0x2 << 10) // (MC) Code Fetch
+#define AT91C_MC_MST0 (0x1 << 16) // (MC) Master 0 Abort Source
+#define AT91C_MC_MST1 (0x1 << 17) // (MC) Master 1 Abort Source
+#define AT91C_MC_SVMST0 (0x1 << 24) // (MC) Saved Master 0 Abort Source
+#define AT91C_MC_SVMST1 (0x1 << 25) // (MC) Saved Master 1 Abort Source
+// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area --------
+#define AT91C_MC_PROT (0x3 << 0) // (MC) Protection
+#define AT91C_MC_PROT_PNAUNA (0x0) // (MC) Privilege: No Access, User: No Access
+#define AT91C_MC_PROT_PRWUNA (0x1) // (MC) Privilege: Read/Write, User: No Access
+#define AT91C_MC_PROT_PRWURO (0x2) // (MC) Privilege: Read/Write, User: Read Only
+#define AT91C_MC_PROT_PRWURW (0x3) // (MC) Privilege: Read/Write, User: Read/Write
+#define AT91C_MC_SIZE (0xF << 4) // (MC) Internal Area Size
+#define AT91C_MC_SIZE_1KB (0x0 << 4) // (MC) Area size 1KByte
+#define AT91C_MC_SIZE_2KB (0x1 << 4) // (MC) Area size 2KByte
+#define AT91C_MC_SIZE_4KB (0x2 << 4) // (MC) Area size 4KByte
+#define AT91C_MC_SIZE_8KB (0x3 << 4) // (MC) Area size 8KByte
+#define AT91C_MC_SIZE_16KB (0x4 << 4) // (MC) Area size 16KByte
+#define AT91C_MC_SIZE_32KB (0x5 << 4) // (MC) Area size 32KByte
+#define AT91C_MC_SIZE_64KB (0x6 << 4) // (MC) Area size 64KByte
+#define AT91C_MC_SIZE_128KB (0x7 << 4) // (MC) Area size 128KByte
+#define AT91C_MC_SIZE_256KB (0x8 << 4) // (MC) Area size 256KByte
+#define AT91C_MC_SIZE_512KB (0x9 << 4) // (MC) Area size 512KByte
+#define AT91C_MC_SIZE_1MB (0xA << 4) // (MC) Area size 1MByte
+#define AT91C_MC_SIZE_2MB (0xB << 4) // (MC) Area size 2MByte
+#define AT91C_MC_SIZE_4MB (0xC << 4) // (MC) Area size 4MByte
+#define AT91C_MC_SIZE_8MB (0xD << 4) // (MC) Area size 8MByte
+#define AT91C_MC_SIZE_16MB (0xE << 4) // (MC) Area size 16MByte
+#define AT91C_MC_SIZE_64MB (0xF << 4) // (MC) Area size 64MByte
+#define AT91C_MC_BA (0x3FFFF << 10) // (MC) Internal Area Base Address
+// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral --------
+// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area --------
+#define AT91C_MC_PUEB (0x1 << 0) // (MC) Protection Unit enable Bit
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface
+// *****************************************************************************
+// -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register --------
+#define AT91C_RTC_UPDTIM (0x1 << 0) // (RTC) Update Request Time Register
+#define AT91C_RTC_UPDCAL (0x1 << 1) // (RTC) Update Request Calendar Register
+#define AT91C_RTC_TIMEVSEL (0x3 << 8) // (RTC) Time Event Selection
+#define AT91C_RTC_TIMEVSEL_MINUTE (0x0 << 8) // (RTC) Minute change.
+#define AT91C_RTC_TIMEVSEL_HOUR (0x1 << 8) // (RTC) Hour change.
+#define AT91C_RTC_TIMEVSEL_DAY24 (0x2 << 8) // (RTC) Every day at midnight.
+#define AT91C_RTC_TIMEVSEL_DAY12 (0x3 << 8) // (RTC) Every day at noon.
+#define AT91C_RTC_CALEVSEL (0x3 << 16) // (RTC) Calendar Event Selection
+#define AT91C_RTC_CALEVSEL_WEEK (0x0 << 16) // (RTC) Week change (every Monday at time 00:00:00).
+#define AT91C_RTC_CALEVSEL_MONTH (0x1 << 16) // (RTC) Month change (every 01 of each month at time 00:00:00).
+#define AT91C_RTC_CALEVSEL_YEAR (0x2 << 16) // (RTC) Year change (every January 1 at time 00:00:00).
+// -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register --------
+#define AT91C_RTC_HRMOD (0x1 << 0) // (RTC) 12-24 hour Mode
+// -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register --------
+#define AT91C_RTC_SEC (0x7F << 0) // (RTC) Current Second
+#define AT91C_RTC_MIN (0x7F << 8) // (RTC) Current Minute
+#define AT91C_RTC_HOUR (0x3F << 16) // (RTC) Current Hour
+#define AT91C_RTC_AMPM (0x1 << 22) // (RTC) Ante Meridiem, Post Meridiem Indicator
+// -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register --------
+#define AT91C_RTC_CENT (0x3F << 0) // (RTC) Current Century
+#define AT91C_RTC_YEAR (0xFF << 8) // (RTC) Current Year
+#define AT91C_RTC_MONTH (0x1F << 16) // (RTC) Current Month
+#define AT91C_RTC_DAY (0x7 << 21) // (RTC) Current Day
+#define AT91C_RTC_DATE (0x3F << 24) // (RTC) Current Date
+// -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register --------
+#define AT91C_RTC_SECEN (0x1 << 7) // (RTC) Second Alarm Enable
+#define AT91C_RTC_MINEN (0x1 << 15) // (RTC) Minute Alarm
+#define AT91C_RTC_HOUREN (0x1 << 23) // (RTC) Current Hour
+// -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register --------
+#define AT91C_RTC_MONTHEN (0x1 << 23) // (RTC) Month Alarm Enable
+#define AT91C_RTC_DATEEN (0x1 << 31) // (RTC) Date Alarm Enable
+// -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register --------
+#define AT91C_RTC_ACKUPD (0x1 << 0) // (RTC) Acknowledge for Update
+#define AT91C_RTC_ALARM (0x1 << 1) // (RTC) Alarm Flag
+#define AT91C_RTC_SECEV (0x1 << 2) // (RTC) Second Event
+#define AT91C_RTC_TIMEV (0x1 << 3) // (RTC) Time Event
+#define AT91C_RTC_CALEV (0x1 << 4) // (RTC) Calendar event
+// -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register --------
+// -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register --------
+// -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register --------
+// -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register --------
+// -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register --------
+#define AT91C_RTC_NVTIM (0x1 << 0) // (RTC) Non valid Time
+#define AT91C_RTC_NVCAL (0x1 << 1) // (RTC) Non valid Calendar
+#define AT91C_RTC_NVTIMALR (0x1 << 2) // (RTC) Non valid time Alarm
+#define AT91C_RTC_NVCALALR (0x1 << 3) // (RTC) Nonvalid Calendar Alarm
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR System Timer Interface
+// *****************************************************************************
+// -------- ST_CR : (ST Offset: 0x0) System Timer Control Register --------
+#define AT91C_ST_WDRST (0x1 << 0) // (ST) Watchdog Timer Restart
+// -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register --------
+#define AT91C_ST_PIV (0xFFFF << 0) // (ST) Watchdog Timer Restart
+// -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register --------
+#define AT91C_ST_WDV (0xFFFF << 0) // (ST) Watchdog Timer Restart
+#define AT91C_ST_RSTEN (0x1 << 16) // (ST) Reset Enable
+#define AT91C_ST_EXTEN (0x1 << 17) // (ST) External Signal Assertion Enable
+// -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register --------
+#define AT91C_ST_RTPRES (0xFFFF << 0) // (ST) Real-time Timer Prescaler Value
+// -------- ST_SR : (ST Offset: 0x10) System Timer Status Register --------
+#define AT91C_ST_PITS (0x1 << 0) // (ST) Period Interval Timer Interrupt
+#define AT91C_ST_WDOVF (0x1 << 1) // (ST) Watchdog Overflow
+#define AT91C_ST_RTTINC (0x1 << 2) // (ST) Real-time Timer Increment
+#define AT91C_ST_ALMS (0x1 << 3) // (ST) Alarm Status
+// -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register --------
+// -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register --------
+// -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register --------
+// -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register --------
+#define AT91C_ST_ALMV (0xFFFFF << 0) // (ST) Alarm Value Value
+// -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register --------
+#define AT91C_ST_CRTV (0xFFFFF << 0) // (ST) Current Real-time Value
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Power Management Controler
+// *****************************************************************************
+// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register --------
+#define AT91C_PMC_PCK (0x1 << 0) // (PMC) Processor Clock
+#define AT91C_PMC_UDP (0x1 << 1) // (PMC) USB Device Port Clock
+#define AT91C_PMC_MCKUDP (0x1 << 2) // (PMC) USB Device Port Master Clock Automatic Disable on Suspend
+#define AT91C_PMC_UHP (0x1 << 4) // (PMC) USB Host Port Clock
+#define AT91C_PMC_PCK0 (0x1 << 8) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK1 (0x1 << 9) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK2 (0x1 << 10) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK3 (0x1 << 11) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK4 (0x1 << 12) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK5 (0x1 << 13) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK6 (0x1 << 14) // (PMC) Programmable Clock Output
+#define AT91C_PMC_PCK7 (0x1 << 15) // (PMC) Programmable Clock Output
+// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register --------
+// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register --------
+// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register --------
+#define AT91C_PMC_CSS (0x3 << 0) // (PMC) Programmable Clock Selection
+#define AT91C_PMC_CSS_SLOW_CLK (0x0) // (PMC) Slow Clock is selected
+#define AT91C_PMC_CSS_MAIN_CLK (0x1) // (PMC) Main Clock is selected
+#define AT91C_PMC_CSS_PLLA_CLK (0x2) // (PMC) Clock from PLL A is selected
+#define AT91C_PMC_CSS_PLLB_CLK (0x3) // (PMC) Clock from PLL B is selected
+#define AT91C_PMC_PRES (0x7 << 2) // (PMC) Programmable Clock Prescaler
+#define AT91C_PMC_PRES_CLK (0x0 << 2) // (PMC) Selected clock
+#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) // (PMC) Selected clock divided by 2
+#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) // (PMC) Selected clock divided by 4
+#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) // (PMC) Selected clock divided by 8
+#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) // (PMC) Selected clock divided by 16
+#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) // (PMC) Selected clock divided by 32
+#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) // (PMC) Selected clock divided by 64
+#define AT91C_PMC_MDIV (0x3 << 8) // (PMC) Master Clock Division
+#define AT91C_PMC_MDIV_1 (0x0 << 8) // (PMC) The master clock and the processor clock are the same
+#define AT91C_PMC_MDIV_2 (0x1 << 8) // (PMC) The processor clock is twice as fast as the master clock
+#define AT91C_PMC_MDIV_3 (0x2 << 8) // (PMC) The processor clock is three times faster than the master clock
+#define AT91C_PMC_MDIV_4 (0x3 << 8) // (PMC) The processor clock is four times faster than the master clock
+// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register --------
+// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register --------
+#define AT91C_PMC_MOSCS (0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask
+#define AT91C_PMC_LOCKA (0x1 << 1) // (PMC) PLL A Status/Enable/Disable/Mask
+#define AT91C_PMC_LOCKB (0x1 << 2) // (PMC) PLL B Status/Enable/Disable/Mask
+#define AT91C_PMC_MCKRDY (0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK0RDY (0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK1RDY (0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK2RDY (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK3RDY (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK4RDY (0x1 << 12) // (PMC) PCK4_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK5RDY (0x1 << 13) // (PMC) PCK5_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK6RDY (0x1 << 14) // (PMC) PCK6_RDY Status/Enable/Disable/Mask
+#define AT91C_PMC_PCK7RDY (0x1 << 15) // (PMC) PCK7_RDY Status/Enable/Disable/Mask
+// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register --------
+// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------
+// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Clock Generator Controler
+// *****************************************************************************
+// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register --------
+#define AT91C_CKGR_MOSCEN (0x1 << 0) // (CKGR) Main Oscillator Enable
+#define AT91C_CKGR_OSCTEST (0x1 << 1) // (CKGR) Oscillator Test
+#define AT91C_CKGR_OSCOUNT (0xFF << 8) // (CKGR) Main Oscillator Start-up Time
+// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register --------
+#define AT91C_CKGR_MAINF (0xFFFF << 0) // (CKGR) Main Clock Frequency
+#define AT91C_CKGR_MAINRDY (0x1 << 16) // (CKGR) Main Clock Ready
+// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register --------
+#define AT91C_CKGR_DIVA (0xFF << 0) // (CKGR) Divider Selected
+#define AT91C_CKGR_DIVA_0 (0x0) // (CKGR) Divider output is 0
+#define AT91C_CKGR_DIVA_BYPASS (0x1) // (CKGR) Divider is bypassed
+#define AT91C_CKGR_PLLACOUNT (0x3F << 8) // (CKGR) PLL A Counter
+#define AT91C_CKGR_OUTA (0x3 << 14) // (CKGR) PLL A Output Frequency Range
+#define AT91C_CKGR_OUTA_0 (0x0 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define AT91C_CKGR_OUTA_1 (0x1 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define AT91C_CKGR_OUTA_2 (0x2 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define AT91C_CKGR_OUTA_3 (0x3 << 14) // (CKGR) Please refer to the PLLA datasheet
+#define AT91C_CKGR_MULA (0x7FF << 16) // (CKGR) PLL A Multiplier
+#define AT91C_CKGR_SRCA (0x1 << 29) // (CKGR) PLL A Source
+// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register --------
+#define AT91C_CKGR_DIVB (0xFF << 0) // (CKGR) Divider Selected
+#define AT91C_CKGR_DIVB_0 (0x0) // (CKGR) Divider output is 0
+#define AT91C_CKGR_DIVB_BYPASS (0x1) // (CKGR) Divider is bypassed
+#define AT91C_CKGR_PLLBCOUNT (0x3F << 8) // (CKGR) PLL B Counter
+#define AT91C_CKGR_OUTB (0x3 << 14) // (CKGR) PLL B Output Frequency Range
+#define AT91C_CKGR_OUTB_0 (0x0 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define AT91C_CKGR_OUTB_1 (0x1 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define AT91C_CKGR_OUTB_2 (0x2 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define AT91C_CKGR_OUTB_3 (0x3 << 14) // (CKGR) Please refer to the PLLB datasheet
+#define AT91C_CKGR_MULB (0x7FF << 16) // (CKGR) PLL B Multiplier
+#define AT91C_CKGR_USB_96M (0x1 << 28) // (CKGR) Divider for USB Ports
+#define AT91C_CKGR_USB_PLL (0x1 << 29) // (CKGR) PLL Use
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Debug Unit
+// *****************************************************************************
+// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register --------
+// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register --------
+// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register --------
+#define AT91C_DBGU_TXRDY (0x1 << 1) // (DBGU) TXRDY Interrupt
+#define AT91C_DBGU_TXEMPTY (0x1 << 9) // (DBGU) TXEMPTY Interrupt
+// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register --------
+// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register --------
+// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register --------
+// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register --------
+#define AT91C_DBGU_FORCE_NTRST (0x1 << 0) // (DBGU) Force NTRST in JTAG
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Peripheral Data Controller
+// *****************************************************************************
+// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register --------
+#define AT91C_PDC_RXTEN (0x1 << 0) // (PDC) Receiver Transfer Enable
+#define AT91C_PDC_RXTDIS (0x1 << 1) // (PDC) Receiver Transfer Disable
+#define AT91C_PDC_TXTEN (0x1 << 8) // (PDC) Transmitter Transfer Enable
+#define AT91C_PDC_TXTDIS (0x1 << 9) // (PDC) Transmitter Transfer Disable
+// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register --------
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller
+// *****************************************************************************
+// -------- AIC_SMR : (AIC Offset: 0x0) Control Register --------
+#define AT91C_AIC_PRIOR (0x7 << 0) // (AIC) Priority Level
+#define AT91C_AIC_PRIOR_LOWEST (0x0) // (AIC) Lowest priority level
+#define AT91C_AIC_PRIOR_HIGHEST (0x7) // (AIC) Highest priority level
+#define AT91C_AIC_SRCTYPE (0x3 << 5) // (AIC) Interrupt Source Type
+#define AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE (0x0 << 5) // (AIC) Internal Sources Code Label Level Sensitive
+#define AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED (0x1 << 5) // (AIC) Internal Sources Code Label Edge triggered
+#define AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL (0x2 << 5) // (AIC) External Sources Code Label High-level Sensitive
+#define AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE (0x3 << 5) // (AIC) External Sources Code Label Positive Edge triggered
+// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register --------
+#define AT91C_AIC_NFIQ (0x1 << 0) // (AIC) NFIQ Status
+#define AT91C_AIC_NIRQ (0x1 << 1) // (AIC) NIRQ Status
+// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) --------
+#define AT91C_AIC_DCR_PROT (0x1 << 0) // (AIC) Protection Mode
+#define AT91C_AIC_DCR_GMSK (0x1 << 1) // (AIC) General Mask
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR External Bus Interface
+// *****************************************************************************
+// -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register --------
+#define AT91C_EBI_CS0A (0x1 << 0) // (EBI) Chip Select 0 Assignment
+#define AT91C_EBI_CS0A_SMC (0x0) // (EBI) Chip Select 0 is assigned to the Static Memory Controller.
+#define AT91C_EBI_CS0A_BFC (0x1) // (EBI) Chip Select 0 is assigned to the Burst Flash Controller.
+#define AT91C_EBI_CS1A (0x1 << 1) // (EBI) Chip Select 1 Assignment
+#define AT91C_EBI_CS1A_SMC (0x0 << 1) // (EBI) Chip Select 1 is assigned to the Static Memory Controller.
+#define AT91C_EBI_CS1A_SDRAMC (0x1 << 1) // (EBI) Chip Select 1 is assigned to the SDRAM Controller.
+#define AT91C_EBI_CS3A (0x1 << 3) // (EBI) Chip Select 3 Assignment
+#define AT91C_EBI_CS3A_SMC (0x0 << 3) // (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2.
+#define AT91C_EBI_CS3A_SMC_SmartMedia (0x1 << 3) // (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated.
+#define AT91C_EBI_CS4A (0x1 << 4) // (EBI) Chip Select 4 Assignment
+#define AT91C_EBI_CS4A_SMC (0x0 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2.
+#define AT91C_EBI_CS4A_SMC_CompactFlash (0x1 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated.
+// -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register --------
+#define AT91C_EBI_DBPUC (0x1 << 0) // (EBI) Data Bus Pull-Up Configuration
+#define AT91C_EBI_EBSEN (0x1 << 1) // (EBI) Bus Sharing Enable
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface
+// *****************************************************************************
+
+// -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register --------
+#define AT91C_SMC2_NWS (0x7F << 0) // (SMC2) Number of Wait States
+#define AT91C_SMC2_WSEN (0x1 << 7) // (SMC2) Wait State Enable
+#define AT91C_SMC2_TDF (0xF << 8) // (SMC2) Data Float Time
+#define AT91C_SMC2_BAT (0x1 << 12) // (SMC2) Byte Access Type
+#define AT91C_SMC2_DBW (0x1 << 13) // (SMC2) Data Bus Width
+#define AT91C_SMC2_DBW_16 (0x1 << 13) // (SMC2) 16-bit.
+#define AT91C_SMC2_DBW_8 (0x2 << 13) // (SMC2) 8-bit.
+#define AT91C_SMC2_DRP (0x1 << 15) // (SMC2) Data Read Protocol
+#define AT91C_SMC2_ACSS (0x3 << 16) // (SMC2) Address to Chip Select Setup
+#define AT91C_SMC2_ACSS_STANDARD (0x0 << 16) // (SMC2) Standard, asserted at the beginning of the access and deasserted at the end.
+#define AT91C_SMC2_ACSS_1_CYCLE (0x1 << 16) // (SMC2) One cycle less at the beginning and the end of the access.
+#define AT91C_SMC2_ACSS_2_CYCLES (0x2 << 16) // (SMC2) Two cycles less at the beginning and the end of the access.
+#define AT91C_SMC2_ACSS_3_CYCLES (0x3 << 16) // (SMC2) Three cycles less at the beginning and the end of the access.
+#define AT91C_SMC2_RWSETUP (0x7 << 24) // (SMC2) Read and Write Signal Setup Time
+#define AT91C_SMC2_RWHOLD (0x7 << 28) // (SMC2) Read and Write Signal Hold Time
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR SDRAM Controller Interface
+// *****************************************************************************
+// -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register --------
+#define AT91C_SDRC_MODE (0xF << 0) // (SDRC) Mode
+#define AT91C_SDRC_MODE_NORMAL_CMD (0x0) // (SDRC) Normal Mode
+#define AT91C_SDRC_MODE_NOP_CMD (0x1) // (SDRC) NOP Command
+#define AT91C_SDRC_MODE_PRCGALL_CMD (0x2) // (SDRC) All Banks Precharge Command
+#define AT91C_SDRC_MODE_LMR_CMD (0x3) // (SDRC) Load Mode Register Command
+#define AT91C_SDRC_MODE_RFSH_CMD (0x4) // (SDRC) Refresh Command
+#define AT91C_SDRC_DBW (0x1 << 4) // (SDRC) Data Bus Width
+#define AT91C_SDRC_DBW_32_BITS (0x0 << 4) // (SDRC) 32 Bits datas bus
+#define AT91C_SDRC_DBW_16_BITS (0x1 << 4) // (SDRC) 16 Bits datas bus
+// -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register --------
+#define AT91C_SDRC_COUNT (0xFFF << 0) // (SDRC) Refresh Counter
+// -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register --------
+#define AT91C_SDRC_NC (0x3 << 0) // (SDRC) Number of Column Bits
+#define AT91C_SDRC_NC_8 (0x0) // (SDRC) 8 Bits
+#define AT91C_SDRC_NC_9 (0x1) // (SDRC) 9 Bits
+#define AT91C_SDRC_NC_10 (0x2) // (SDRC) 10 Bits
+#define AT91C_SDRC_NC_11 (0x3) // (SDRC) 11 Bits
+#define AT91C_SDRC_NR (0x3 << 2) // (SDRC) Number of Row Bits
+#define AT91C_SDRC_NR_11 (0x0 << 2) // (SDRC) 11 Bits
+#define AT91C_SDRC_NR_12 (0x1 << 2) // (SDRC) 12 Bits
+#define AT91C_SDRC_NR_13 (0x2 << 2) // (SDRC) 13 Bits
+#define AT91C_SDRC_NB (0x1 << 4) // (SDRC) Number of Banks
+#define AT91C_SDRC_NB_2_BANKS (0x0 << 4) // (SDRC) 2 banks
+#define AT91C_SDRC_NB_4_BANKS (0x1 << 4) // (SDRC) 4 banks
+#define AT91C_SDRC_CAS (0x3 << 5) // (SDRC) CAS Latency
+#define AT91C_SDRC_CAS_2 (0x2 << 5) // (SDRC) 2 cycles
+#define AT91C_SDRC_TWR (0xF << 7) // (SDRC) Number of Write Recovery Time Cycles
+#define AT91C_SDRC_TRC (0xF << 11) // (SDRC) Number of RAS Cycle Time Cycles
+#define AT91C_SDRC_TRP (0xF << 15) // (SDRC) Number of RAS Precharge Time Cycles
+#define AT91C_SDRC_TRCD (0xF << 19) // (SDRC) Number of RAS to CAS Delay Cycles
+#define AT91C_SDRC_TRAS (0xF << 23) // (SDRC) Number of RAS Active Time Cycles
+#define AT91C_SDRC_TXSR (0xF << 27) // (SDRC) Number of Command Recovery Time Cycles
+// -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register --------
+#define AT91C_SDRC_SRCB (0x1 << 0) // (SDRC) Self-refresh Command Bit
+// -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register --------
+#define AT91C_SDRC_LPCB (0x1 << 0) // (SDRC) Low-power Command Bit
+// -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register --------
+#define AT91C_SDRC_RES (0x1 << 0) // (SDRC) Refresh Error Status
+// -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register --------
+// -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register --------
+// -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register --------
+
+
+// *****************************************************************************
+// SOFTWARE API DEFINITION FOR Burst Flash Controller Interface
+// *****************************************************************************
+// -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register --------
+#define AT91C_BFC_BFCOM (0x3 << 0) // (BFC) Burst Flash Controller Operating Mode
+#define AT91C_BFC_BFCOM_DISABLED (0x0) // (BFC) NPCS0 is driven by the SMC or remains high.
+#define AT91C_BFC_BFCOM_ASYNC (0x1) // (BFC) Asynchronous
+#define AT91C_BFC_BFCOM_BURST_READ (0x2) // (BFC) Burst Read
+#define AT91C_BFC_BFCC (0x3 << 2) // (BFC) Burst Flash Controller Operating Mode
+#define AT91C_BFC_BFCC_MCK (0x1 << 2) // (BFC) Master Clock.
+#define AT91C_BFC_BFCC_MCK_DIV_2 (0x2 << 2) // (BFC) Master Clock divided by 2.
+#define AT91C_BFC_BFCC_MCK_DIV_4 (0x3 << 2) // (BFC) Master Clock divided by 4.
+#define AT91C_BFC_AVL (0xF << 4) // (BFC) Address Valid Latency
+#define AT91C_BFC_PAGES (0x7 << 8) // (BFC) Page Size
+#define AT91C_BFC_PAGES_NO_PAGE (0x0 << 8) // (BFC) No page handling.
+#define AT91C_BFC_PAGES_16 (0x1 << 8) // (BFC) 16 bytes page size.
+#define AT91C_BFC_PAGES_32 (0x2 << 8) // (BFC) 32 bytes page size.
+#define AT91C_BFC_PAGES_64 (0x3 << 8) // (BFC) 64 bytes page size.
+#define AT91C_BFC_PAGES_128 (0x4 << 8) // (BFC) 128 bytes page size.
+#define AT91C_BFC_PAGES_256 (0x5 << 8) // (BFC) 256 bytes page size.
+#define AT91C_BFC_PAGES_512 (0x6 << 8) // (BFC) 512 bytes page size.
+#define AT91C_BFC_PAGES_1024 (0x7 << 8) // (BFC) 1024 bytes page size.
+#define AT91C_BFC_OEL (0x3 << 12) // (BFC) Output Enable Latency
+#define AT91C_BFC_BAAEN (0x1 << 16) // (BFC) Burst Address Advance Enable
+#define AT91C_BFC_BFOEH (0x1 << 17) // (BFC) Burst Flash Output Enable Handling
+#define AT91C_BFC_MUXEN (0x1 << 18) // (BFC) Multiplexed Bus Enable
+#define AT91C_BFC_RDYEN (0x1 << 19) // (BFC) Ready Enable Mode
+
+#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/