Re: 2.6.12 breaks 8139cp [PATCH 1 of 2]

[Kylene Jo Hall]

On Tue, 2005-07-05 at 08:35 -0700, Chris Wright wrote:
> * Kylene Jo Hall (kjhall@xxxxxxxxxx) wrote:
> > On Wed, 2005-06-29 at 10:22 +0200, Pierre Ossman wrote:
> > > Kylene Jo Hall wrote:
> > > 
> > > >
> > > >Here is the patch that should fix the problem.  Pierre can you remove
> > > >the first patch I sent and test this one?
> > > >
> > > Apart from an improperly closed enum the patch worked fine. Great work!
> > > 
> > > Rgds
> > > Pierre
> > 
> > Please accept this patch.  The enum closing Pierre mentioned has been
> > fixed.  This patch fixes the 8309 networking problem.
> 
> Kylene, is there any way you can narrow this down to the core, critical
> fix?  Something on the order of 10's of lines rather than 100's?  Also,
> a better patch description would be great (what's broken, what fixes
> it).

The patch below is the smallest I can make this.
> 
> thanks!
> -chris
> 

A problem was reported that the tpm driver was interfereing with
networking on the 8139 chipset.  The tpm driver was using a hard coded
the memory address instead of the value the BIOS was putting the chip
at.  This was in the tpm_lpc_bus_init function.  That function can be
replaced with querying the value at Vendor specific locations.  This
patch replaces all calls to tpm_lpc_bus_init and the hardcoding of the
base address with a lookup of the address at the correct vendor
location.

Signed-off-by: Kylene Hall <kjhall@xxxxxxxxxx>
---
diff -puN drivers/char/tpm/tpm_atmel.c~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm_atmel.c
--- 25/drivers/char/tpm/tpm_atmel.c~tpm-replace-odd-LPC-init-function	2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm_atmel.c	2005-06-23 21:26:00.000000000 -0700
@@ -22,6 +22,9 @@
 #include "tpm.h"
 
 /* Atmel definitions */
-#define	TPM_ATML_BASE			0x400
+enum tpm_atmel_addr {
+	TPM_ATMEL_BASE_ADDR_LO = 0x08,
+	TPM_ATMEL_BASE_ADDR_HI = 0x09
+};
 
 /* write status bits */
@@ -148,5 +149,4 @@ static struct tpm_vendor_specific tpm_at
 	.req_complete_mask = ATML_STATUS_BUSY | ATML_STATUS_DATA_AVAIL,
 	.req_complete_val = ATML_STATUS_DATA_AVAIL,
-	.base = TPM_ATML_BASE,
 	.miscdev = { .fops = &atmel_ops, },
 };
@@ -158,14 +158,16 @@ static int __devinit tpm_atml_init(struc
 {
 	u8 version[4];
 	int rc = 0;
+	int lo, hi;
 
 	if (pci_enable_device(pci_dev))
 		return -EIO;
 
-	if (tpm_lpc_bus_init(pci_dev, TPM_ATML_BASE)) {
-		rc = -ENODEV;
-		goto out_err;
-	}
+	lo = tpm_read_index( TPM_ATMEL_BASE_ADDR_LO );
+	hi = tpm_read_index( TPM_ATMEL_BASE_ADDR_HI );
+
+	tpm_atmel.base = (hi<<8)|lo;
+	dev_dbg( &pci_dev->dev, "Operating with base: 0x%x\n", tpm_atmel.base);
 
 	/* verify that it is an Atmel part */
 	if (tpm_read_index(4) != 'A' || tpm_read_index(5) != 'T'
diff -puN drivers/char/tpm/tpm.c~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm.c
--- 25/drivers/char/tpm/tpm.c~tpm-replace-odd-LPC-init-function	2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm.c	2005-06-23 21:52:40.000000000 -0700
@@ -586,10 +500,6 @@ int tpm_pm_resume(struct pci_dev *pci_de
 	if (chip == NULL)
 		return -ENODEV;
 
-	spin_lock(&driver_lock);
-	tpm_lpc_bus_init(pci_dev, chip->vendor->base);
-	spin_unlock(&driver_lock);
-
 	return 0;
 }
 
diff -puN drivers/char/tpm/tpm_nsc.c~tpm-replace-odd-LPC-init-function drivers/char/tpm/tpm_nsc.c
--- 25/drivers/char/tpm/tpm_nsc.c~tpm-replace-odd-LPC-init-function	2005-06-23 21:26:00.000000000 -0700
+++ 25-akpm/drivers/char/tpm/tpm_nsc.c	2005-06-23 21:26:00.000000000 -0700
@@ -22,6 +22,10 @@
 /* National definitions */
 #define 	TPM_NSC_BASE			0x360
 #define	TPM_NSC_IRQ			0x07
+#define	TPM_NSC_BASE0_HI		0x60
+#define	TPM_NSC_BASE0_LO		0x61
+#define	TPM_NSC_BASE1_HI		0x62
+#define	TPM_NSC_BASE1_LO		0x63

 #define	NSC_LDN_INDEX			0x07
 #define	NSC_SID_INDEX			0x20
@@ -246,5 +250,4 @@ static struct tpm_vendor_specific tpm_ns
 	.req_complete_mask = NSC_STATUS_OBF,
 	.req_complete_val = NSC_STATUS_OBF,
-	.base = TPM_NSC_BASE,
 	.miscdev = { .fops = &nsc_ops, },
 };
@@ -255,15 +258,16 @@ static int __devinit tpm_nsc_init(struct
 				  const struct pci_device_id *pci_id)
 {
 	int rc = 0;
+	int lo, hi;
+
+	hi = tpm_read_index(TPM_NSC_BASE0_HI);
+	lo = tpm_read_index(TPM_NSC_BASE0_LO);
+
+	tpm_nsc.base = (hi<<8) | lo;
 
 	if (pci_enable_device(pci_dev))
 		return -EIO;
 
-	if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
-		rc = -ENODEV;
-		goto out_err;
-	}
-
 	/* verify that it is a National part (SID) */
 	if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
 		rc = -ENODEV;
_



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/