Re: 2 errors in 2.6.12

[Andrew Morton]

Michal Semler <cijoml@xxxxxxxx> wrote:
>
>  I tested both - problem with SB Live! is fixed, but tuning problem in PV951 
>  still exist :(
> 
> 
>  This is what I gets into dmesg:
> 
> 
>  Linux video capture interface: v1.00
>  bttv: driver version 0.9.15 loaded
>  bttv: using 8 buffers with 2080k (520 pages) each for capture
>  bttv: Bt8xx card found (0).
>  ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 9 (level, low) -> 
>  IRQ 9
>  bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 9, latency: 32, mmio: 0xb69fe000
>  bttv0: using: ProVideo PV951 [card=42,insmod option]
>  bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
>  bttv0: using tuner=1
>  bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>  bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>  tvaudio: TV audio decoder + audio/video mux driver
>  tvaudio: known chips: 
>  tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 
>  (PV951),ta8874z
>  tvaudio: found pic16c54 (PV951) @ 0x96
>  bttv0: i2c: checking for TDA9887 @ 0x86... not found
>  tuner: Unknown parameter `type'
>  bttv0: registered device video0
>  bttv0: registered device vbi0
>  bttv0: registered device radio0
>  bttv0: PLL: 28636363 => 35468950 .. ok
>  ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>  PCI: setting IRQ 10 as level-triggered
>  ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> 
>  IRQ 10

(cc the v4l list)

The above is with 2.6.13-rc4.  2.6.11 was OK.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/