Re: [patch 2.6.13-rc3] pci: restore BAR values after D3hot->D0 for devices that need it

[Greg KH]

On Sun, Jul 31, 2005 at 08:36:53PM +0100, Ralf Baechle wrote:
> On Wed, Jul 27, 2005 at 10:19:44AM -0400, John W. Linville wrote:
> 
> > Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration
> > (including BARs) when transitioning from D3hot->D0.  This leaves such
> > a device in an inaccessible state.  The patch below causes the BARs
> > to be restored when enabling such a device, so that its driver will
> > be able to access it.
> > 
> > The patch also adds pci_restore_bars as a new global symbol, and adds a
> > correpsonding EXPORT_SYMBOL_GPL for that.
> > 
> > Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
> > ---
> > Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a
> > (re)boot.  Most drivers call pci_enable_device very early, so devices
> > left in D3hot that lose configuration during the D3hot->D0 transition
> > will be inaccessible to their drivers.
> 
> Tested with the 3com 3c556B Hurricane mini-PCI card in the IBM A21P.  Without
> this patch the 3c59x driver has not been able to read the MAC address of
> the card's EEPROM with ACPI enabled, now it works with and without ACPI
> support.  This patch should settle at least some of the issues in
> http://bugzilla.kernel.org/show_bug.cgi?id=1188.

Thanks for testing.  I'm still going to hold off sending this in for
2.6.13 and wait for 2.6.14, unless people really think it should go in
now.

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/