[PATCH 5/5] 2.6.13-rc5-mm1, driver for IBM Automatic Server Restart watchdog
From: Andrey Panin
Date: Wed Aug 10 2005 - 05:35:12 EST
This patch adds driver for IBM Automatic Server Restart watchdog hardware
found in some IBM eServer xSeries machines. This driver is based on the ugly
driver provided by IBM. Driver was tested on IBM eServer 226.
Signed-off-by: Andrey Panin <pazke@xxxxxxxxx>
drivers/char/watchdog/Kconfig | 10 +
drivers/char/watchdog/Makefile | 1
drivers/char/watchdog/ibmasr.c | 407 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 418 insertions(+)
diff -urdpN linux-2.6.13-rc5-mm1.vanilla/drivers/char/watchdog/ibmasr.c linux-2.6.13-rc5-mm1/drivers/char/watchdog/ibmasr.c
--- linux-2.6.13-rc5-mm1.vanilla/drivers/char/watchdog/ibmasr.c 1970-01-01 03:00:00.000000000 +0300
+++ linux-2.6.13-rc5-mm1/drivers/char/watchdog/ibmasr.c 2005-08-10 11:43:45.000000000 +0400
@@ -0,0 +1,407 @@
+/*
+ * IBM Automatic Server Restart driver.
+ *
+ * Copyright (c) 2005 Andrey Panin <pazke@xxxxxxxxx>
+ *
+ * Based on driver written by Pete Reynolds.
+ * Copyright (c) IBM Corporation, 1998-2004.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU Public License, incorporated herein by reference.
+ */
+
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/dmi.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+
+enum {
+ ASMTYPE_UNKNOWN,
+ ASMTYPE_TOPAZ,
+ ASMTYPE_JASPER,
+ ASMTYPE_PEARL,
+ ASMTYPE_JUNIPER,
+ ASMTYPE_SPRUCE,
+};
+
+#define PFX "ibmasr: "
+
+#define TOPAZ_ASR_REG_OFFSET 4
+#define TOPAZ_ASR_TOGGLE 0x40
+#define TOPAZ_ASR_DISABLE 0x80
+
+/* PEARL ASR S/W REGISTER SUPERIO PORT ADDRESSES */
+#define PEARL_BASE 0xe04
+#define PEARL_WRITE 0xe06
+#define PEARL_READ 0xe07
+
+#define PEARL_ASR_DISABLE_MASK 0x80 /* bit 7: disable = 1, enable = 0 */
+#define PEARL_ASR_TOGGLE_MASK 0x40 /* bit 6: 0, then 1, then 0 */
+
+/* JASPER OFFSET FROM SIO BASE ADDR TO ASR S/W REGISTERS. */
+#define JASPER_ASR_REG_OFFSET 0x38
+
+#define JASPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1, enable = 0 */
+#define JASPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */
+
+#define JUNIPER_BASE_ADDRESS 0x54b /* Base address of Juniper ASR */
+#define JUNIPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1 enable = 0 */
+#define JUNIPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */
+
+#define SPRUCE_BASE_ADDRESS 0x118e /* Base address of Spruce ASR */
+#define SPRUCE_ASR_DISABLE_MASK 0x01 /* bit 1: disable = 1 enable = 0 */
+#define SPRUCE_ASR_TOGGLE_MASK 0x02 /* bit 0: 0, then 1, then 0 */
+
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+static unsigned long asr_is_open;
+static char asr_expect_close;
+
+static unsigned int asr_type, asr_base, asr_length;
+static unsigned int asr_read_addr, asr_write_addr;
+static unsigned char asr_toggle_mask, asr_disable_mask;
+
+static void asr_toggle(void)
+{
+ unsigned char reg = inb(asr_read_addr);
+
+ outb(reg & ~asr_toggle_mask, asr_write_addr);
+ reg = inb(asr_read_addr);
+
+ outb(reg | asr_toggle_mask, asr_write_addr);
+ reg = inb(asr_read_addr);
+
+ outb(reg & ~asr_toggle_mask, asr_write_addr);
+ reg = inb(asr_read_addr);
+}
+
+static void asr_enable(void)
+{
+ unsigned char reg;
+
+ if (asr_type == ASMTYPE_TOPAZ) {
+ /* asr_write_addr == asr_read_addr */
+ reg = inb(asr_read_addr);
+ outb(reg & ~(TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE),
+ asr_read_addr);
+ } else {
+ /*
+ * First make sure the hardware timer is reset by toggling
+ * ASR hardware timer line.
+ */
+ asr_toggle();
+
+ reg = inb(asr_read_addr);
+ outb(reg & ~asr_disable_mask, asr_write_addr);
+ }
+ reg = inb(asr_read_addr);
+}
+
+static void asr_disable(void)
+{
+ unsigned char reg = inb(asr_read_addr);
+
+ if (asr_type == ASMTYPE_TOPAZ)
+ /* asr_write_addr == asr_read_addr */
+ outb(reg | TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE,
+ asr_read_addr);
+ else {
+ outb(reg | asr_toggle_mask, asr_write_addr);
+ reg = inb(asr_read_addr);
+
+ outb(reg | asr_disable_mask, asr_write_addr);
+ }
+ reg = inb(asr_read_addr);
+}
+
+static int __init asr_get_base_address(void)
+{
+ unsigned char low, high;
+ const char *type = "";
+
+ asr_length = 1;
+
+ switch (asr_type) {
+ case ASMTYPE_TOPAZ:
+ /* SELECT SuperIO CHIP FOR QUERYING (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
+ outb(0x07, 0x2e);
+ outb(0x07, 0x2f);
+
+ /* SELECT AND READ THE HIGH-NIBBLE OF THE GPIO BASE ADDRESS */
+ outb(0x60, 0x2e);
+ high = inb(0x2f);
+
+ /* SELECT AND READ THE LOW-NIBBLE OF THE GPIO BASE ADDRESS */
+ outb(0x61, 0x2e);
+ low = inb(0x2f);
+
+ asr_base = (high << 16) | low;
+ asr_read_addr = asr_write_addr =
+ asr_base + TOPAZ_ASR_REG_OFFSET;
+ asr_length = 5;
+
+ break;
+
+ case ASMTYPE_JASPER:
+ type = "Jaspers ";
+
+ /* FIXME: need to use pci_config_lock here, but it's not exported */
+
+/* spin_lock_irqsave(&pci_config_lock, flags);*/
+
+ /* Select the SuperIO chip in the PCI I/O port register */
+ outl(0x8000f858, 0xcf8);
+
+ /*
+ * Read the base address for the SuperIO chip.
+ * Only the lower 16 bits are valid, but the address is word
+ * aligned so the last bit must be masked off.
+ */
+ asr_base = inl(0xcfc) & 0xfffe;
+
+/* spin_unlock_irqrestore(&pci_config_lock, flags);*/
+
+ asr_read_addr = asr_write_addr =
+ asr_base + JASPER_ASR_REG_OFFSET;
+ asr_toggle_mask = JASPER_ASR_TOGGLE_MASK;
+ asr_disable_mask = JASPER_ASR_DISABLE_MASK;
+ asr_length = JASPER_ASR_REG_OFFSET + 1;
+
+ break;
+
+ case ASMTYPE_PEARL:
+ type = "Pearls ";
+ asr_base = PEARL_BASE;
+ asr_read_addr = PEARL_READ;
+ asr_write_addr = PEARL_WRITE;
+ asr_toggle_mask = PEARL_ASR_TOGGLE_MASK;
+ asr_disable_mask = PEARL_ASR_DISABLE_MASK;
+ asr_length = 4;
+ break;
+
+ case ASMTYPE_JUNIPER:
+ type = "Junipers ";
+ asr_base = JUNIPER_BASE_ADDRESS;
+ asr_read_addr = asr_write_addr = asr_base;
+ asr_toggle_mask = JUNIPER_ASR_TOGGLE_MASK;
+ asr_disable_mask = JUNIPER_ASR_DISABLE_MASK;
+ break;
+
+ case ASMTYPE_SPRUCE:
+ type = "Spruce's ";
+ asr_base = SPRUCE_BASE_ADDRESS;
+ asr_read_addr = asr_write_addr = asr_base;
+ asr_toggle_mask = SPRUCE_ASR_TOGGLE_MASK;
+ asr_disable_mask = SPRUCE_ASR_DISABLE_MASK;
+ break;
+ }
+
+ if (!request_region(asr_base, asr_length, "ibmasr")) {
+ printk(KERN_ERR PFX "address %#x already in use\n",
+ asr_base);
+ return -EBUSY;
+ }
+
+ printk(KERN_INFO PFX "found %sASR @ addr %#x\n", type, asr_base);
+
+ return 0;
+}
+
+
+static ssize_t asr_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ if (count) {
+ if (!nowayout) {
+ size_t i;
+
+ /* In case it was set long ago */
+ asr_expect_close = 0;
+
+ for (i = 0; i != count; i++) {
+ char c;
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ if (c == 'V')
+ asr_expect_close = 42;
+ }
+ }
+ asr_toggle();
+ }
+ return count;
+}
+
+static int asr_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ static const struct watchdog_info ident = {
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+ WDIOF_MAGICCLOSE,
+ .identity = "IBM ASR"
+ };
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int heartbeat;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ident, sizeof(ident)) ?
+ -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ asr_toggle();
+ return 0;
+
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(heartbeat, p))
+ return -EFAULT;
+ /* Fall */
+
+ case WDIOC_GETTIMEOUT:
+ heartbeat = 256;
+ return put_user(heartbeat, p);
+
+ case WDIOC_SETOPTIONS: {
+ int new_options, retval = -EINVAL;
+
+ if (get_user(new_options, p))
+ return -EFAULT;
+
+ if (new_options & WDIOS_DISABLECARD) {
+ asr_disable();
+ retval = 0;
+ }
+
+ if (new_options & WDIOS_ENABLECARD) {
+ asr_enable();
+ asr_toggle();
+ retval = 0;
+ }
+
+ return retval;
+ }
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static int asr_open(struct inode *inode, struct file *file)
+{
+ if(test_and_set_bit(0, &asr_is_open))
+ return -EBUSY;
+
+ asr_toggle();
+ asr_enable();
+
+ return nonseekable_open(inode, file);
+}
+
+static int asr_release(struct inode *inode, struct file *file)
+{
+ if (asr_expect_close == 42)
+ asr_disable();
+ else {
+ printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
+ asr_toggle();
+ }
+ clear_bit(0, &asr_is_open);
+ asr_expect_close = 0;
+ return 0;
+}
+
+static struct file_operations asr_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = asr_write,
+ .ioctl = asr_ioctl,
+ .open = asr_open,
+ .release = asr_release,
+};
+
+static struct miscdevice asr_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &asr_fops,
+};
+
+
+struct ibmasr_id {
+ const char *desc;
+ int type;
+};
+
+static struct ibmasr_id __initdata ibmasr_id_table[] = {
+ { "IBM Automatic Server Restart - eserver xSeries 220", ASMTYPE_TOPAZ },
+ { "IBM Automatic Server Restart - Machine Type 8673", ASMTYPE_PEARL },
+ { "IBM Automatic Server Restart - Machine Type 8480", ASMTYPE_JASPER },
+ { "IBM Automatic Server Restart - Machine Type 8482", ASMTYPE_JUNIPER },
+ { "IBM Automatic Server Restart - Machine Type 8648", ASMTYPE_SPRUCE },
+ { NULL }
+};
+
+static int __init ibmasr_init(void)
+{
+ struct ibmasr_id *id;
+ int rc;
+
+ for (id = ibmasr_id_table; id->desc; id++) {
+ if (dmi_find_device(DMI_DEV_TYPE_OTHER, id->desc, NULL)) {
+ asr_type = id->type;
+ break;
+ }
+ }
+
+ if (!asr_type)
+ return -ENODEV;
+
+ rc = misc_register(&asr_miscdev);
+ if (rc < 0) {
+ printk(KERN_ERR PFX "failed to register misc device\n");
+ return rc;
+ }
+
+ rc = asr_get_base_address();
+ if (rc) {
+ misc_deregister(&asr_miscdev);
+ return rc;
+ }
+
+ return 0;
+}
+
+static void __exit ibmasr_exit(void)
+{
+ if (!nowayout)
+ asr_disable();
+
+ misc_deregister(&asr_miscdev);
+
+ release_region(asr_base, asr_length);
+}
+
+module_init(ibmasr_init);
+module_exit(ibmasr_exit);
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+MODULE_DESCRIPTION("IBM Automatic Server Restart driver");
+MODULE_AUTHOR("Andrey Panin");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff -urdpN linux-2.6.13-rc5-mm1.vanilla/drivers/char/watchdog/Kconfig linux-2.6.13-rc5-mm1/drivers/char/watchdog/Kconfig
--- linux-2.6.13-rc5-mm1.vanilla/drivers/char/watchdog/Kconfig 2005-08-09 11:03:44.000000000 +0400
+++ linux-2.6.13-rc5-mm1/drivers/char/watchdog/Kconfig 2005-08-08 13:55:10.000000000 +0400
@@ -548,6 +548,16 @@ config WDT_501_PCI
can do this via the tachometer parameter. Only do this if you have a
fan tachometer actually set up.
+config IBMASR
+ tristate "IBM Automatic Server Restart"
+ depends on WATCHDOG && X86
+ help
+ This is the driver for the IBM Automatic Server Restart watchdog
+ timer builtin into some eServer xSeries machines.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmasr.
+
#
# USB-based Watchdog Cards
#
diff -urdpN linux-2.6.13-rc5-mm1.vanilla/drivers/char/watchdog/Makefile linux-2.6.13-rc5-mm1/drivers/char/watchdog/Makefile
--- linux-2.6.13-rc5-mm1.vanilla/drivers/char/watchdog/Makefile 2005-08-09 11:03:44.000000000 +0400
+++ linux-2.6.13-rc5-mm1/drivers/char/watchdog/Makefile 2005-08-08 13:55:10.000000000 +0400
@@ -48,6 +48,7 @@ obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
+obj-$(CONFIG_IBMASR) += ibmasr.o
# PowerPC Architecture
obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/