Re: Atyfb questions and issues

[James Simmons]

> > I have the following issue.  I am trying to get an ATI Rage XL chip
> > working on a MIPS-based processor, with a 2.6.11-based kernel from
> > linux-mips.org.  Now, I know that this was working with a 2.4.25-based
> > kernel previously.
> 
> Okay, the 2.4 driver is more intrusive, it programs the chip from start as
> much as possible, while the 2.6 driver tries to depend on Bios settings. I
> haven't checked out the 2.6 driver enough to see if it is still possible
> to program from scratch.

The code is there to program the chip from scratch. Just select 

"Rage XL No-BIOS Init support"

The last time I tried it it didn't work. If we could get it working that 
would be great.
 
> Yes, according to my register data sheet a 7 means the memory clock
> frequency is derived from DLLCLK. Unfortunately I don't know what this
> DLLCLK is. I think it means the chip isn't properly initialized yet and it
> clocks the memory from a safe clock source to allow the computer to start.
> 
> However, we most likely have no way to find out the speed of this DLLCLK.
> 
> The memory clock frequency is important for the driver to be able to set a
> display mode; it needs to program a memory reload frequency into the chip
> which depends on the memory frequency.

Their is code in xlint.c that should properly set this. Have to debug that 
code.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/