Re: IT8212/ITE RAID

[CaT]

On Sun, Aug 14, 2005 at 12:08:42PM +0100, Daniel Drake wrote:
> CaT wrote:
> >1. Alan Cox's IDE driver that was included in his ac patchset, which
> >   seems to have died at 2.6.11ac7.
> >2. A brief visit from a SCSI IDE driver in Andrew Mortons mm patchset.
> >   It lived a brief but noted life before being taken out without any
> >   reason (that I spotted) in 2.6.12-rc4-mm1
> 
> Alan's driver has been merged into 2.6.13. You can get the up-to-date 

Wooooooooooooooooooooooooooo!

> patches here:
> 
> http://dev.gentoo.org/~dsd/genpatches/trunk/2.6.12/2315_ide-no-lba.patch
> http://dev.gentoo.org/~dsd/genpatches/trunk/2.6.12/4345_it8212.patch

Didn't use these patches. Just went to 13-rc6 for now to test. All works
as before with the following errors on bootup:

[227523.229512] hda: max request size: 128KiB
[227523.229557] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, BUG
[227523.229631] hda: cache flushes not supported
[227523.229932]  hda:hda: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[227523.230905] hda: recal_intr: error=0x04 { DriveStatusError }
[227523.230952] ide: failed opcode was: unknown
[227524.379085]  hda1
[227524.379710] hdc: max request size: 128KiB
[227524.379752] hdc: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, BUG
[227524.379825] hdc: cache flushes not supported
[227524.379991]  hdc:hdc: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[227524.380702] hdc: recal_intr: error=0x04 { DriveStatusError }
[227524.380748] ide: failed opcode was: unknown
[227525.536757]  hdc1 hdc2


/dev/hda:

 Model=ST3200822A, FwRev=3.01, SerialNo=3LJ22Y8F
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
 CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455
 IORDY=on/off
 PIO modes:  pio0 pio1 pio2 
 DMA modes:  mdma0 mdma1 mdma2 
 AdvancedPM=no
 Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: 

 * signifies the current active mode


/dev/hdc:

 Model=IC35L060AVV207-0, FwRev=V22OA63A, SerialNo=VNVB01G2RAK8XH
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200
 IORDY=on/off
 PIO modes:  pio0 pio1 pio2 
 DMA modes:  mdma0 mdma1 mdma2 
 AdvancedPM=no
 Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a: 

 * signifies the current active mode

-- 
    "To the extent that we overreact, we proffer the terrorists the
    greatest tribute."
    	- High Court Judge Michael Kirby
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/