RE: [PATCH] add transport class symlink to device object

[James Bottomley]

On Mon, 2005-08-15 at 20:52 -0400, James.Smart@xxxxxxxxxx wrote:
> What is "0000:00:04:0" in this case ? The "device" is not a serial
> port, which is what the ttyXX back link would lead you to believe.
> Thus, it's a serial port multiplexer that supports up to N ports,
> right ? and wouldn't the more correct representation have been to
> enumerate a device for each serial port ? (e.g. 0000:00:04.0/line0,
> 0000:00:04.0/line1, or similar)

It's PCI segment 0, bus 0, slot 4, function 0, which is apparently a 3
port serial card (probably the GSP function of a pa8800?)

> Think if SCSI used this same style of representation. For example,
> if there was no scsi target device entity, but class entities did
> exist and they just pointed back to the scsi host device entry.

Yes, it's theoretically possible to have had SCSI do this.  We didn't do
it at the time because class_devices didn't exist when the SCSI tree was
first put together.  It would, however, have rather put the mockers on
doing transport classes since class devices can't point at other class
devices.

> My vote is to make the multiplexor instantiate each serial line
> as a separate device.

That's a choice that's up to the maintainer of the serial driver ...

James


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/