Re: Second "CPU" of 1-core HyperThreading CPU not found in 2.6.13

[Philippe Elie]

On Mon, 29 Aug 2005 at 23:03 +0000, Chase Venters wrote:

> Greetings kind hackers...
> 	I recently switched to 2.6.13 on my desktop. I noticed that the second 
> "CPU" (is there a better term to use in this HyperThreading scenario?) that 
> used to be listed in /proc/cpuinfo is no longer present. Browsing over the 
> archives, it appears as if someone else had this problem... their solution 
> was to enable CONFIG_PM, but I already have CONFIG_PM enabled.
> 	I have to boot with 'noapic' because I have my CD-Writer hanging off an 
> aic7xxx, and that driver goes into a nice error loop if I boot without it. 
> 	I'll include some lspci output below in case it is useful. There's one more 
> thing I noticed in the transition to 2.6.13, but I'm really not sure where I 
> could start diagnosing it, and so any suggestions would be marvelous. 
> 	As I mentioned, this machine is my desktop. In the past, I've been able to 
> run compilers / other intensive tasks while listening to music in XMMS - the 
> playback is never disrupted (indeed, on this P4 3.2ghz XMMS takes virtually 
> none of the processor). Yet I've noticed enough momentary stops in sound 
> output now to begin to suspect I've got some kind of problem. 
> 	Last kernels that were functional in both regards were 2.6.12.4 and 2.6.11.7. 
> Please note that I have not compiled with the new default tick rate of 250Hz 
> - I'm running 1000Hz, and I have also enabled the Preemptible kernel and BKL 
> Preemption as I have in earlier kernels.

I needed CONFIG_PM=y and CONFIG_ACPI=y to get ht working on 2.6.13.

regards,
Philippe Elie

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/