Re: [RFC][PATCH 2.6.13] Marvell SATA support (PIO mode)

[Jiri Slaby]

Brett Russ napsal(a):

> This is the first public release of my libata compatible low level driver for
> the Marvell SATA family.  Currently it successfully runs in PIO mode on a 6081
> chip.  EDMA support is in the works and should be done shortly.  Review,
> testing (especially on other flavors of Marvell), comments welcome.
>  
[snip]

> +static struct pci_device_id mv_pci_tbl[] = {
> +	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x},
> +	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x},
> +	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_508x},
> +	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x},
> +
> +	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x},
> +	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
> +	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
> +	{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
> +	{}			/* terminate list */
> +};
> <http://localhost/lxr/ident?i=MODULE_DEVICE_TABLE>
MODULE_DEVICE_TABLE(pci, 
<http://localhost/lxr/ident?i=MODULE_DEVICE_TABLE>mv_pci_tbl);  here for 
hotplug

> +
> +static struct pci_driver mv_pci_driver = {
> +	.name			= DRV_NAME,
> +	.id_table		= mv_pci_tbl,
> +	.probe			= mv_init_one,
> +	.remove			= ata_pci_remove_one,
> +};
>  
[snip]

--
Jiri Slaby         www.fi.muni.cz/~xslaby
~\-/~      jirislaby@xxxxxxxxx      ~\-/~
241B347EC88228DE51EE A49C4A73A25004CB2A10

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/