Re: 2.6.13: Crash in Yenta initialization

From: Andreas Koch
Date: Fri Sep 02 2005 - 19:46:38 EST


As a follow-up to my previous mail, I collected a boot log of the working
kernel 2.6.12-rc6 with Ivan's bridge initialization patches below. The
crucial part seem to be the different bridge initialization sections:

2.6.12-rc6 + Ivan's patches:

PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: c8100000-c81fffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:05.0
IO window: 00003000-00003fff
IO window: 00004000-00004fff
PREFETCH window: 80000000-81ffffff
MEM window: 88000000-89ffffff
PCI: Bridge: 0000:02:00.0
IO window: 3000-5fff
MEM window: 88000000-8affffff
PREFETCH window: 80000000-81ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 3000-5fff
MEM window: 88000000-8affffff
PREFETCH window: 80000000-81ffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
IO window: 00006000-00006fff
IO window: 00007000-00007fff
PREFETCH window: 82000000-83ffffff
MEM window: 8c000000-8dffffff
PCI: Bus 11, cardbus bridge: 0000:06:09.1
IO window: 00008000-00008fff
IO window: 00009000-00009fff
PREFETCH window: 84000000-85ffffff
MEM window: 8e000000-8fffffff
PCI: Bus 15, cardbus bridge: 0000:06:09.3
IO window: 0000a000-0000afff
IO window: 0000b000-0000bfff
PREFETCH window: 86000000-87ffffff
MEM window: 90000000-91ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 6000-bfff
MEM window: c8400000-c84fffff
PREFETCH window: 82000000-87ffffff

... Versus the much shorter output from 2.6.13

PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: c8100000-c81fffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:05.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 80000000-81ffffff
MEM window: 84000000-85ffffff
PCI: Bridge: 0000:02:00.0
IO window: 3000-3fff
MEM window: 84000000-86ffffff
PREFETCH window: 80000000-81ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 3000-3fff
MEM window: 84000000-86ffffff
PREFETCH window: 80000000-81ffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
IO window: 00004000-000040ff
IO window: 00004400-000044ff
PREFETCH window: 82000000-83ffffff
MEM window: 88000000-89ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: c8400000-c84fffff
PREFETCH window: 82000000-83ffffff

Below the full boot log for the working 2.6.12-rc6+IvanPatches

I hope this additional info helps to bring this part of 2.6.13 up to the
earlier capability.

Andreas Koch

Linux version 2.6.12-rc6 (root@meneldor) (gcc version 3.3.5-20050130 (Gentoo
Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #11 Sat Sep 3
01:09:47 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
BIOS-e820: 000000007fe80000 - 000000007fe89000 (ACPI data)
BIOS-e820: 000000007fe89000 - 000000007ff00000 (ACPI NVS)
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 523904
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 294528 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f68d0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x7fe80e14
ACPI: FADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x7fe88e8a
ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x7fe88efe
ACPI: HPET (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x7fe88f64
ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x7fe88f9c
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7fe88fd8
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x7fe81249
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x7fe81071
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x7fe80e58
ACPI: DSDT (v001 INTEL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec20000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0x0
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 lvm2root=/dev/vg0/root
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec20000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1995.318 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2069132k/2095616k available (3516k kernel code, 25232k reserved, 1584k
data, 220k init, 1178112k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3923.96 BogoMIPS (lpj=1961984)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000
00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180
00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 2107k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI-0352: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
search_node dfdc6160 start_node dfdc6160 return_node 00000000
ACPI-0352: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
search_node dfdc6da0 start_node dfdc6da0 return_node 00000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 29)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 7 of bridge 0000:02:00.0
PCI: Cannot allocate resource region 8 of bridge 0000:02:00.0
PCI: Cannot allocate resource region 4 of device 0000:03:02.0
PCI: Cannot allocate resource region 4 of device 0000:03:02.1
PCI: Cannot allocate resource region 0 of device 0000:03:02.2
PCI: Cannot allocate resource region 4 of device 0000:03:03.0
PCI: Cannot allocate resource region 4 of device 0000:03:03.1
PCI: Cannot allocate resource region 0 of device 0000:03:03.2
PCI: Cannot allocate resource region 0 of device 0000:03:04.0
PCI: Cannot allocate resource region 1 of device 0000:03:04.0
PCI: Cannot allocate resource region 0 of device 0000:03:05.0
PCI: Cannot allocate resource region 0 of device 0000:03:06.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: c8100000-c81fffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:05.0
IO window: 00003000-00003fff
IO window: 00004000-00004fff
PREFETCH window: 80000000-81ffffff
MEM window: 88000000-89ffffff
PCI: Bridge: 0000:02:00.0
IO window: 3000-5fff
MEM window: 88000000-8affffff
PREFETCH window: 80000000-81ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 3000-5fff
MEM window: 88000000-8affffff
PREFETCH window: 80000000-81ffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
IO window: 00006000-00006fff
IO window: 00007000-00007fff
PREFETCH window: 82000000-83ffffff
MEM window: 8c000000-8dffffff
PCI: Bus 11, cardbus bridge: 0000:06:09.1
IO window: 00008000-00008fff
IO window: 00009000-00009fff
PREFETCH window: 84000000-85ffffff
MEM window: 8e000000-8fffffff
PCI: Bus 15, cardbus bridge: 0000:06:09.3
IO window: 0000a000-0000afff
IO window: 0000b000-0000bfff
PREFETCH window: 86000000-87ffffff
MEM window: 90000000-91ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 6000-bfff
MEM window: c8400000-c84fffff
PREFETCH window: 82000000-87ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Device 0000:00:1c.0 not available because of resource collisions
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Device 0000:00:1c.1 not available because of resource collisions
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1c.2 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 31
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Enabling device 0000:06:09.3 (0080 -> 0083)
ACPI: PCI Interrupt 0000:06:09.3[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:06:09.3 to 64
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1125709926.697:0): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NTFS driver 2.1.22 [Flags: R/O].
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
PCI: Device 0000:00:1c.0 not available because of resource collisions
PCI: Device 0000:00:1c.1 not available because of resource collisions
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (55 C)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 32 (level, low) -> IRQ 32
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@xxxxxxx) and petero2@xxxxxxxxx
tg3.c:v3.29 (May 23, 2005)
ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit)
10/100/1000BaseT Ethernet 00:c0:9f:75:57:33
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6M: IDE controller at PCI slot 0000:00:1f.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ICH6M: chipset revision 4
ICH6M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK1032GAX, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GMA-4080N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 195371568 sectors (100030 MB), CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@xxxxxxxxxx>
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 30 (level, low) -> IRQ 30
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[30] MMIO=[8a005000-8a0057ff]
Max Packet=[2048]
ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[c8415000-c84157ff]
Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@xxxxxxxxxx>
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 31
Yenta: CardBus bridge found at 0000:03:05.0 [104c:ac50]
yenta 0000:03:05.0: Preassigned resource 0 busy, reconfiguring...
yenta 0000:03:05.0: no resource of type 1200 available, trying to continue...
yenta 0000:03:05.0: Preassigned resource 1 busy, reconfiguring...
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:03:05.0, mfunc 0x00521d22, devctl 0x66
Yenta: ISA IRQ mask 0x0000, PCI irq 31
Socket status: 30000006
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 18
Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070]
yenta 0000:06:09.0: Preassigned resource 0 busy, reconfiguring...
yenta 0000:06:09.0: no resource of type 1200 available, trying to continue...
yenta 0000:06:09.0: Preassigned resource 1 busy, reconfiguring...
Yenta O2: res at 0x94/0xD4: ea/00
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0438, PCI irq 18
Socket status: 30000006
ACPI: PCI Interrupt 0000:06:09.1[A] -> GSI 18 (level, low) -> IRQ 18
Yenta: CardBus bridge found at 0000:06:09.1 [1025:0070]
yenta 0000:06:09.1: Preassigned resource 1 busy, reconfiguring...
Yenta: ISA IRQ mask 0x0438, PCI irq 18
Socket status: 30000006
ACPI: PCI Interrupt 0000:06:09.3[A] -> GSI 18 (level, low) -> IRQ 18
Yenta: CardBus bridge found at 0000:06:09.3 [1025:0070]
yenta 0000:06:09.3: Preassigned resource 1 busy, reconfiguring...
Yenta: ISA IRQ mask 0x0438, PCI irq 18
Socket status: 30000410
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f0000507951]
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc8004000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ieee1394: Host added: ID:BUS[1-00:1023] GUID[00c09f000038d11c]
ACPI: PCI Interrupt 0000:03:02.2[C] -> GSI 26 (level, low) -> IRQ 26
ehci_hcd 0000:03:02.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:03:02.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:03:02.2: irq 26, io mem 0x8a005800
ehci_hcd 0000:03:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:03:03.2[C] -> GSI 29 (level, low) -> IRQ 29
ehci_hcd 0000:03:03.2: VIA Technologies, Inc. USB 2.0 (#2)
ehci_hcd 0000:03:03.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:03:03.2: irq 29, io mem 0x8a005900
ehci_hcd 0000:03:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3
usb 2-3: new high speed USB device using ehci_hcd and address 2
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 24 (level, low) -> IRQ 24
uhci_hcd 0000:03:02.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
uhci_hcd 0000:03:02.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:03:02.0: irq 24, io base 0x00005040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:02.1[B] -> GSI 25 (level, low) -> IRQ 25
uhci_hcd 0000:03:02.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#2)
uhci_hcd 0000:03:02.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:03:02.1: irq 25, io base 0x00005060
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 27 (level, low) -> IRQ 27
uhci_hcd 0000:03:03.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#3)
uhci_hcd 0000:03:03.0: new USB bus registered, assigned bus number 10
uhci_hcd 0000:03:03.0: irq 27, io base 0x00005080
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 28 (level, low) -> IRQ 28
uhci_hcd 0000:03:03.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#4)
uhci_hcd 0000:03:03.1: new USB bus registered, assigned bus number 11
uhci_hcd 0000:03:03.1: irq 28, io base 0x000050a0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usbcore: registered new driver auerswald
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@xxxxxxxxxxx>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
AZAL RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
usb 2-3.1: new high speed USB device using ehci_hcd and address 4
input: AT Translated Set 2 keyboard on isa0060/serio0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 220k freed
hub 2-3.1:1.0: USB hub found
hub 2-3.1:1.0: 4 ports detected
usb 2-3.2: new high speed USB device using ehci_hcd and address 5
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
usb 9-2: new low speed USB device using uhci_hcd and address 2
input: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:03:02.1-2
usb 10-2: new full speed USB device using uhci_hcd and address 2
input: USB HID v1.00 Device [USB Audio] on usb-0000:03:03.0-2
Vendor: SMSC Model: 223 U HS-CF Rev: 3.60
Type: Direct-Access ANSI SCSI revision: 00
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
Adding 2097144k swap on /dev/vg0/swap. Priority:-1 extents:1
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
NTFS volume version 3.1.
ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
ReiserFS: dm-3: using ordered data mode
ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-3: checking transaction log (dm-3)
ReiserFS: dm-3: Using r5 hash to sort names
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.0.3
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno@xxxxxxxxxxxxxxx>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 17 (level, low) -> IRQ 17
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ipw2200: Radio Frequency Kill Switch is On:
Kill switch must be turned off for wireless networking to work.
usbcore: registered new driver snd-usb-audio
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.

Attachment: pgp00000.pgp
Description: PGP signature