[PATCH] vga text console and stty cols/rows

From: Samuel Thibault
Date: Sat Sep 03 2005 - 08:34:59 EST


Hi,

Some people use 66-cells braille devices for reading the console, and
hence would like to reduce the width of the screen by using:

stty cols 66

However, the vga text console doesn't behave correctly: the 14 first
characters of the second line are put on the right of the first line and
so forth.

Here is a patch to correct that. It corrects the disp_end and offset
registers of the vga board on console resize and console switch.

On usual screens, you then correctly get a right and/or bottom blank
margin. On some laptop panels, the output is resized so that text
actually gets magnified, which can be great for some people (see
http://dept-info.labri.fr/~thibault/ls.jpg ).

Regards,
Samuel

Signed-off-by: Samuel Thibault <samuel.thibault@xxxxxxxxxxxx>

--- linux-2.6.13/drivers/video/console/vgacon.c 2005-09-02 18:18:38.000000000 +0200
+++ linux/drivers/video/console/vgacon.c 2005-09-03 01:18:05.000000000 +0200
@@ -497,6 +497,56 @@ static void vgacon_cursor(struct vc_data
}
}

+static int vgacon_doresize(struct vc_data *c,
+ unsigned int width, unsigned int height) {
+ unsigned long flags;
+ unsigned int scanlines = height * c->vc_font.height;
+ u8 scanlines_lo, r7, vsync_end, mode;
+
+ spin_lock_irqsave(&vga_lock, flags);
+
+ outb_p(VGA_CRTC_MODE, vga_video_port_reg);
+ mode = inb_p(vga_video_port_val);
+
+ if (mode & 0x04)
+ scanlines >>= 1;
+
+ scanlines -= 1;
+ scanlines_lo = scanlines & 0xff;
+
+ outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
+ r7 = inb_p(vga_video_port_val) & ~0x42;
+
+ if (scanlines & 0x100)
+ r7 |= 0x02;
+ if (scanlines & 0x200)
+ r7 |= 0x40;
+
+ /* deprotect registers */
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ vsync_end = inb_p(vga_video_port_val);
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ outb_p(vsync_end & ~0x80, vga_video_port_val);
+
+ outb_p(VGA_CRTC_H_DISP, vga_video_port_reg);
+ outb_p(width - 1, vga_video_port_val);
+ outb_p(VGA_CRTC_OFFSET, vga_video_port_reg);
+ outb_p(width >> 1, vga_video_port_val);
+
+ outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg);
+ outb_p(scanlines_lo, vga_video_port_val);
+ outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg);
+ outb_p(r7,vga_video_port_val);
+
+ /* reprotect registers */
+ outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg);
+ outb_p(vsync_end, vga_video_port_val);
+
+ spin_unlock_irqrestore(&vga_lock, flags);
+
+ return 0;
+}
+
static int vgacon_switch(struct vc_data *c)
{
/*
@@ -510,9 +560,12 @@ static int vgacon_switch(struct vc_data
/* We can only copy out the size of the video buffer here,
* otherwise we get into VGA BIOS */

- if (!vga_is_gfx)
+ if (!vga_is_gfx) {
scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf,
c->vc_screenbuf_size > vga_vram_size ? vga_vram_size : c->vc_screenbuf_size);
+ vgacon_doresize(c, c->vc_cols, c->vc_rows);
+ }
+
return 0; /* Redrawing not needed */
}

@@ -962,6 +1015,15 @@ static int vgacon_font_get(struct vc_dat

#endif

+static int vgacon_resize(struct vc_data *c, unsigned int width, unsigned int height) {
+ if (width % 2 || width > ORIG_VIDEO_COLS || height > ORIG_VIDEO_LINES)
+ return -EINVAL;
+
+ if (CON_IS_VISIBLE(c) && !vga_is_gfx) /* who knows */
+ vgacon_doresize(c, width, height);
+ return 0;
+}
+
static int vgacon_scrolldelta(struct vc_data *c, int lines)
{
if (!lines) /* Turn scrollback off */
@@ -1103,6 +1165,7 @@ const struct consw vga_con = {
.con_blank = vgacon_blank,
.con_font_set = vgacon_font_set,
.con_font_get = vgacon_font_get,
+ .con_resize = vgacon_resize,
.con_set_palette = vgacon_set_palette,
.con_scrolldelta = vgacon_scrolldelta,
.con_set_origin = vgacon_set_origin,
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/