crash upon rmmod aic7xxx (pcmcia)

From: Kasper Peeters
Date: Sun Sep 11 2005 - 07:49:29 EST


Hi,

Since the early 2.6.x kernels, removing the aic7xxx module (either by
doing a 'rmmod' by hand or by ejecting the pcmcia aic7xxx card) locks
the system hard after about 2 seconds, leaving no trace in syslog.
Just checked with kernel 2.6.13 (and pcmcia-tools 3.2.8).

Upon insertion of the pcmcia card, this appears in syslog:

Sep 11 14:36:05 whiteroom2 kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
Sep 11 14:36:05 whiteroom2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low
) -> IRQ 11
Sep 11 14:36:05 whiteroom2 kernel: aic7xxx: PCI Device 3:0:0 failed memory mapped test. Using PIO.
Sep 11 14:36:05 whiteroom2 kernel: ahc_pci:3:0:0: Host Adapter Bios disabled. Using default SCSI device pa
rameters
Sep 11 14:36:05 whiteroom2 kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
Sep 11 14:36:05 whiteroom2 kernel: <Adaptec 1480A Ultra SCSI adapter>
Sep 11 14:36:05 whiteroom2 kernel: aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
Sep 11 14:36:05 whiteroom2 kernel:
Sep 11 14:36:12 whiteroom2 kernel: scsi0: PCI error Interrupt at seqaddr = 0x8
Sep 11 14:36:12 whiteroom2 kernel: scsi0: Signaled a Target Abort
Sep 11 14:36:21 whiteroom2 kernel: Vendor: HP Model: CD-Writer+ 9200 Rev: 1.0c
Sep 11 14:36:21 whiteroom2 kernel: Type: CD-ROM ANSI SCSI revision: 04
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: asynchronous.
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: Beginning Domain Validation
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: Domain Validation skipping write tests
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
Sep 11 14:36:21 whiteroom2 kernel: target0:0:4: Ending Domain Validation
Sep 11 14:36:21 whiteroom2 kernel: sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Sep 11 14:36:21 whiteroom2 kernel: Attached scsi generic sg0 at scsi0, channel 0, id 4, lun 0, type 5
Sep 11 14:36:22 whiteroom2 scsi.agent[3014]: cdrom at /devices/pci0000:00/0000:00:1e.0/0000:02:0a.0/0000:03
:00.0/host0/target0:0:4/0:0:4:0


Can someone give me a hand pinning down this bug?

(Please CC replies to me directly).

Kasper

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/