Re: later kernels vs ntpd

[Gene Heskett]

On Sunday 18 September 2005 10:59, Gene Heskett wrote:
>On Sunday 18 September 2005 10:46, Gene Heskett wrote:
>>Greetings;
>>
>>I'm observing that the last time ntpd logged that it was synchronized
>>with a time src, was:
>>
>>6 Aug 17:44:36 ntpd[1886]: synchronized to 140.221.8.88, stratum=1
>>
>>This was about a week before I left for month long trip, and I left it
>>running 2.6.13-rc6 which had been stable for several days prior to my
>>leaving.  In early September, I had to lead the missus thru a reboot
>>because the system time had jumped to some other time zone and the
>>heyu based lighting automation was afu.  That seemed to fix it till I
>>got back on the 14th.  At that time I noted that my watch appeared to
>> be off
>>by several minutes.  The next day I did a 'service ntpd restart',
>>which backed the system time up about 4 minutes, bringing my watch a
>>lot closer.
>>
>>Then I noticed that yesterday, before I built and installed 2.6.13.1,
>>that ntpd was apparently not synching.  A restart, which runs ntpdate
>>to crash set the clocks, does work, but ntpd is not.  I haven't
>>changed anything in the configs for ntpd in several months.
>>
>>Historicly, this box has lost track of what time zone its on on
>>several occasions, but I believe this is a seperate problem.
>>
>>Is anyone else having ntpd synch problems?  Take a look at
>>your /var/log/ntpd.log just for grins.  All I'm getting is the
>>restart messages, like these:
>>
>>18 Sep 10:41:44 ntpd[17787]: ntpd exiting on signal 15
>>18 Sep 10:37:07 ntpd[29714]: running as uid(38)/gid(38)
>>euid(38)/egid(38).
>>
>>>>From the restart I just did, note the time reset of over 4 minutes.
>>>
>>>>From the dates on my /boot/vmlinuz* files, it worked for 2.6.13-rc5,
>>
>>but not for rc6 & (apparently) later.
>>
>>Comments anybody?
>>
>>I'm going to reboot to an older kernel (2.6.13-rc5) as a check, if
>>ntpd starts working, I'll advise here.
>
>Ok, on rebooting to 2.6.13-rc5, time synch was achieved in
>approximately 5 minutes after the reboot.  So apparently -rc6 and
>13.1 are broken for ntpd.
>
>Sorry your coal mine canary was asleep on the job, to let this go on
>for over a month without a chirp.  But I've been out of state, trying
>to make a junkyard tv station work, in a market that cannot support a
>real tv station.
>
>Does anyone have a hint?

Someone suggested that I needed the ipv6 stuff, so I built a 2.6.13.1
with all that turned on, but an overnight run of it also failed to
synch, so I'm back on 2.6.13-rc5, which works well.

But this is preventing me from playing the coal mine canary.  Does
anyone else have a suggestion?

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.35% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/