Re: 2.6.14-rc2-mm1

[Andrew Morton]

Reuben Farrelly <reuben-lkml@xxxxxxxx> wrote:
>
> Hi,
> 
> On 22/09/2005 5:28 p.m., Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.14-rc2/2.6.14-rc2-mm1/
> > 
> > - Added git tree `git-sas.patch': Luben Tuikov's SAS driver and its support.
> > 
> > - Various random other things - nothing major.
> 
> Overall boots up and looks fine, but still seeing this oops which comes up on 
> warm reboot intermittently:

Nasty.

> ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
> ahci(0000:00:1f.2) flags: 64bit ncq led slum part
> ata1: SATA max UDMA/133 cmd 0xF8802D00 ctl 0x0 bmdma 0x0 irq 193
> ata2: SATA max UDMA/133 cmd 0xF8802D80 ctl 0x0 bmdma 0x0 irq 193
> ata3: SATA max UDMA/133 cmd 0xF8802E00 ctl 0x0 bmdma 0x0 irq 193
> ata4: SATA max UDMA/133 cmd 0xF8802E80 ctl 0x0 bmdma 0x0 irq 193
> ata1: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
> ata1: dev 0 configured for UDMA/133
> scsi0 : ahci
> ata2: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
> ata2: dev 0 configured for UDMA/133
> scsi1 : ahci
> ata3: no device found (phy stat 00000000)
> scsi2 : ahci
> ata4: no device found (phy stat 00000000)
> scsi3 : ahci
>    Vendor: ATA       Model: ST380817AS        Rev: 3.42
>    Type:   Direct-Access                      ANSI SCSI revision: 05
>    Vendor: ATA       Model: ST380817AS        Rev: 3.42
>    Type:   Direct-Access                      ANSI SCSI revision: 05
> scheduling while atomic: ksoftirqd/0/0x00000100/3
>   [<c0103ad0>] dump_stack+0x17/0x19
>   [<c031483a>] schedule+0x8ba/0xccb
>   [<c0315d17>] __down+0xe5/0x126
>   [<c0313f1a>] __down_failed+0xa/0x10
>   [<c0233f3d>] .text.lock.main+0x2b/0x3e
>   [<c022f90c>] device_del+0x35/0x5d
>   [<c025d71e>] scsi_target_reap+0x89/0xa3
>   [<c025ed5a>] scsi_device_dev_release+0x114/0x18b
>   [<c022f504>] device_release+0x1a/0x5a
>   [<c01e15c2>] kobject_cleanup+0x43/0x6b
>   [<c01e15f5>] kobject_release+0xb/0xd
>   [<c01e1e3c>] kref_put+0x2e/0x92
>   [<c01e160b>] kobject_put+0x14/0x16
>   [<c022f8d5>] put_device+0x11/0x13
>   [<c0256fd8>] scsi_put_command+0x7c/0x9e
>   [<c025b918>] scsi_next_command+0xf/0x19
>   [<c025b9db>] scsi_end_request+0x93/0xc5
>   [<c025bdd4>] scsi_io_completion+0x281/0x46a
>   [<c025c1c8>] scsi_generic_done+0x2d/0x3a
>   [<c0257746>] scsi_finish_command+0x7f/0x93
>   [<c025762b>] scsi_softirq+0xab/0x11c
>   [<c0121952>] __do_softirq+0x72/0xdc
>   [<c01219f3>] do_softirq+0x37/0x39
>   [<c0121eeb>] ksoftirqd+0x9f/0xf4
>   [<c012ff37>] kthread+0x99/0x9d
>   [<c01010b5>] kernel_thread_helper+0x5/0xb

There's a whole bunch of reasons why we cannot call scsi_target_reap() from
softirq context.  klist_del() locking and whatever semaphore that's taking
are amongst them...

> Unable to handle kernel paging request<5>SCSI device sda: 156301488 512-byte 
> hdwr sectors (80026 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
> SCSI device sda: drive cache: write back
>   sda: at virtual address 6b6b6b6b
>   printing eip:
> c025b81f
> *pde = 00000000
> Oops: 0000 [#1]
> SMP
> last sysfs file:
> Modules linked in:
> CPU:    0
> EIP:    0060:[<c025b81f>]    Not tainted VLI
> EFLAGS: 00010292   (2.6.14-rc2-mm1)
> EIP is at scsi_run_queue+0x12/0xb8
> eax: 6b6b6b6b   ebx: f7c36b70   ecx: 00000000   edx: 00000001
> esi: f7c4eb6c   edi: 00000246   ebp: c1911eac   esp: c1911e98
> ds: 007b   es: 007b   ss: 0068
> Process ksoftirqd/0 (pid: 3, threadinfo=c1910000 task=c1942a90)
> Stack: c1baf5f8 f7c36b70 f7c36b70 f7c4eb6c 00000246 c1911eb8 c025b91f f7c386e8
>         c1911ed0 c025b9db f7c36b70 f7c4eb6c 00000000 00000000 c1911f28 c025bdd4
>         00000001 00004f80 00000100 00000001 c1807ac0 00000000 00000000 00040000
> Call Trace:
>   [<c0103a83>] show_stack+0x94/0xca
>   [<c0103c2c>] show_registers+0x15a/0x1ea
>   [<c0103e4a>] die+0x108/0x183
>   [<c03166cd>] do_page_fault+0x1ed/0x63d
>   [<c0103753>] error_code+0x4f/0x54
>   [<c025b91f>] scsi_next_command+0x16/0x19
>   [<c025b9db>] scsi_end_request+0x93/0xc5
>   [<c025bdd4>] scsi_io_completion+0x281/0x46a
>   [<c025c1c8>] scsi_generic_done+0x2d/0x3a
>   [<c0257746>] scsi_finish_command+0x7f/0x93
>   [<c025762b>] scsi_softirq+0xab/0x11c
>   [<c0121952>] __do_softirq+0x72/0xdc
>   [<c01219f3>] do_softirq+0x37/0x39
>   [<c0121eeb>] ksoftirqd+0x9f/0xf4
>   [<c012ff37>] kthread+0x99/0x9d
>   [<c01010b5>] kernel_thread_helper+0x5/0xb
> Code: fd ff 8b 4d ec 8b 41 44 e8 e4 a6 0b 00 89 45 f0 89 d8 e8 34 c1 ff ff eb 
> b2 55 89 e5 57 56 53 83 ec 08 89 45 f0 8b 80 10 01 00 00 <8b> 38 80 b8 85 01 
> 00 00 00 0f 88 8b 00 00 00 8b 47 44 e8 af a6
>   <0>Kernel panic - not syncing: Fatal exception in interrupt
>   <0>Rebooting in 60 seconds..
> 

It oopsed as well.   That might be a second bug.

> 
> This is not new to this -mm release (I had a screen dump of it 2 weeks ago but 
> I suspect it is actually a bit older than that even).
> 

Thanks.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/