Re: 2.6.14-rc4-rt7

[Fernando Lopez-Lezcano]

On Fri, 2005-10-21 at 10:05 +0200, Ingo Molnar wrote:
> * Fernando Lopez-Lezcano <nando@xxxxxxxxxxxxxxxxxx> wrote:
> 
> > Found this on the logs:
> > 
> > Oct 20 15:52:57 cmn3 kernel: BUG in hydrogen:4810, ktimer expired 
> > short without user signal!:
> 
> hm. This suggests that hydrogen executing schedule_ktimer() was waken up 
> 45 microseconds too early, and most likely it was not woken up by the 
> hres timer code (which should have done the wakeup 45 microseconds later 
> anyway).
> 
> I've added special hres-wakeup-debugging code to the scheduler in 
> -rc5-rt2 to catch this particular scenario, you might want to give it a 
> try. The new code is always enabled and it should pinpoint the precise 
> place that does the wrong wakeup. You should see a new type of warning 
> in your log:
> 
>  BUG: foo:1234 waking up bar:4321, expiring ktimer short without user signal!
> 
> in shortly before the usual "BUG: ktimer expired short" message. Both 
> messages will be triggered only once per bootup - but the condition 
> itself likely occurs much more often on your box.

Here's one with rc5-rt3:

Oct 21 15:01:46 cmn3 kernel: BUG: ktimer expired short without user
signal! (hald-addon-stor:4309)
Oct 21 15:01:46 cmn3 kernel: .. expires:   1012/751245500
Oct 21 15:01:46 cmn3 kernel: .. expired:   1012/750908115
Oct 21 15:01:46 cmn3 kernel: .. at line:   942
Oct 21 15:01:46 cmn3 kernel: .. interval:  0/0
Oct 21 15:01:46 cmn3 kernel: .. now:       1012/750908723
Oct 21 15:01:46 cmn3 kernel: .. rem:       0/337385
Oct 21 15:01:46 cmn3 kernel: .. overrun:   0
Oct 21 15:01:46 cmn3 kernel: .. getoffset: 00000000
Oct 21 15:01:46 cmn3 kernel:  [<c014205d>] check_ktimer_signal
+0x16d/0x190 (8)
Oct 21 15:01:46 cmn3 kernel:  [<c0142129>] __ktimer_nanosleep+0xa9/0xf0
(56)
Oct 21 15:01:46 cmn3 kernel:  [<c01421ab>] ktimer_nanosleep+0x3b/0x50
(56)
Oct 21 15:01:46 cmn3 kernel:  [<c0375d20>] nanosleep_restart_mono
+0x0/0x30 (8)
Oct 21 15:01:46 cmn3 kernel:  [<c0141ee0>] ktimer_wake_up+0x0/0x10 (64)
Oct 21 15:01:46 cmn3 kernel:  [<c014225c>] sys_nanosleep+0x4c/0x50 (32)
Oct 21 15:01:46 cmn3 kernel:  [<c0103481>] syscall_call+0x7/0xb (16)

And another (the same?) after a reboot:

Oct 21 16:06:11 cmn3 kernel: BUG: ktimer expired short without user
signal! (udev:317)
Oct 21 16:06:11 cmn3 kernel: .. expires:   9/24925742
Oct 21 16:06:11 cmn3 kernel: .. expired:   9/24924523
Oct 21 16:06:11 cmn3 kernel: .. at line:   942
Oct 21 16:06:11 cmn3 kernel: .. interval:  0/0
Oct 21 16:06:11 cmn3 kernel: .. now:       9/24925385
Oct 21 16:06:11 cmn3 kernel: .. rem:       0/1219
Oct 21 16:06:11 cmn3 kernel: .. overrun:   0
Oct 21 16:06:11 cmn3 kernel: .. getoffset: 00000000
Oct 21 16:06:11 cmn3 kernel:  [<c014205d>] check_ktimer_signal
+0x16d/0x190 (8)
Oct 21 16:06:11 cmn3 kernel:  [<c0142129>] __ktimer_nanosleep+0xa9/0xf0
(56)
Oct 21 16:06:11 cmn3 kernel:  [<c01421ab>] ktimer_nanosleep+0x3b/0x50
(56)
Oct 21 16:06:11 cmn3 kernel:  [<c0375d20>] nanosleep_restart_mono
+0x0/0x30 (8)
Oct 21 16:06:11 cmn3 kernel:  [<c0141ee0>] ktimer_wake_up+0x0/0x10 (64)
Oct 21 16:06:11 cmn3 kernel:  [<c014225c>] sys_nanosleep+0x4c/0x50 (32)
Oct 21 16:06:11 cmn3 kernel:  [<c0103481>] syscall_call+0x7/0xb (16)

In both cases the machine goes catatonic, I don't know if right after
this or not. It responds to the SysRQ key but that's pretty much it, I
should probably try to get a serial console going somehow. 

-- Fernando


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/