EDAC (was: Re: 2.6.14-rc5-mm1)

[Sander]

Alan Cox wrote (ao):
> On Maw, 2005-10-25 at 10:55 -0700, Avuton Olrich wrote:
> > After upgrading to 2.6.14-rc5-mm1 I have been greeted with:
> > 
> > PCI-Bridge- Detected Parity Error on 0000:00:08.0 0000:00:08.0
> 
> > ... I probably get a new one every minute or so. Is this new, perhaps
> > part of the new EDAC stuff? And what kind of adverse effect does this
> > have on my computer (the actual parity error)?
> 
> If the parity error is real then it would indicate a bad PCI transfer
> has occurred and data corrupted in the transfer. Unfortunately because
> some vendors don't use PCI parity checking much and some card vendors
> don't debug their products except on that OS there are some cards that
> generate spurious parity errors.
> 
> Can you send an lspci -vxx. That'll help the EDAC folk build up a view
> of what needs to be blacklisted.

Stupid question: should EDAC work on a Via Epia board? Because I see the
"Detected Parity Error" messages too (and a lot of them), but figured
that the option is just 'not an option' :-)

If it should work I'll be happy to send the error and lspci if that
helps.

-- 
Humilis IT Services and Solutions
http://www.humilis.net
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/