[patch 02/22] USB Serial: rename ChangeLog.old

From: Greg Kroah-Hartman
Date: Thu Nov 17 2005 - 13:05:42 EST


From: Greg Kroah-Hartman <gregkh@xxxxxxx>

People are complaining about a .old file in the tree. So rename
drivers/usb/serial/ChangeLog.old to ChangeLog.history.

Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
drivers/usb/serial/ChangeLog.history | 730 +++++++++++++++++++++++++++++++++++
drivers/usb/serial/ChangeLog.old | 730 -----------------------------------
2 files changed, 730 insertions(+), 730 deletions(-)

--- /dev/null
+++ usb-2.6/drivers/usb/serial/ChangeLog.history
@@ -0,0 +1,730 @@
+This is the contents of some of the drivers/usb/serial/ files that had old
+changelog comments. They were quite old, and out of date, and we don't keep
+them anymore, so I've put them here, away from the source files, in case
+people still care to see them.
+
+- Greg Kroah-Hartman <greg@xxxxxxxxx> October 20, 2005
+
+-----------------------------------------------------------------------
+usb-serial.h Change Log comments:
+
+ (03/26/2002) gkh
+ removed the port->tty check from port_paranoia_check() due to serial
+ consoles not having a tty device assigned to them.
+
+ (12/03/2001) gkh
+ removed active from the port structure.
+ added documentation to the usb_serial_device_type structure
+
+ (10/10/2001) gkh
+ added vendor and product to serial structure. Needed to determine device
+ owner when the device is disconnected.
+
+ (05/30/2001) gkh
+ added sem to port structure and removed port_lock
+
+ (10/05/2000) gkh
+ Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
+ fix bug with urb->dev not being set properly, now that the usb core
+ needs it.
+
+ (09/11/2000) gkh
+ Added usb_serial_debug_data function to help get rid of #DEBUG in the
+ drivers.
+
+ (08/28/2000) gkh
+ Added port_lock to port structure.
+
+ (08/08/2000) gkh
+ Added open_count to port structure.
+
+ (07/23/2000) gkh
+ Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+ Modifications to allow usb-serial drivers to be modules.
+
+-----------------------------------------------------------------------
+usb-serial.c Change Log comments:
+
+ (12/10/2002) gkh
+ Split the ports off into their own struct device, and added a
+ usb-serial bus driver.
+
+ (11/19/2002) gkh
+ removed a few #ifdefs for the generic code and cleaned up the failure
+ logic in initialization.
+
+ (10/02/2002) gkh
+ moved the console code to console.c and out of this file.
+
+ (06/05/2002) gkh
+ moved location of startup() call in serial_probe() until after all
+ of the port information and endpoints are initialized. This makes
+ things easier for some drivers.
+
+ (04/10/2002) gkh
+ added serial_read_proc function which creates a
+ /proc/tty/driver/usb-serial file.
+
+ (03/27/2002) gkh
+ Got USB serial console code working properly and merged into the main
+ version of the tree. Thanks to Randy Dunlap for the initial version
+ of this code, and for pushing me to finish it up.
+ The USB serial console works with any usb serial driver device.
+
+ (03/21/2002) gkh
+ Moved all manipulation of port->open_count into the core. Now the
+ individual driver's open and close functions are called only when the
+ first open() and last close() is called. Making the drivers a bit
+ smaller and simpler.
+ Fixed a bug if a driver didn't have the owner field set.
+
+ (02/26/2002) gkh
+ Moved all locking into the main serial_* functions, instead of having
+ the individual drivers have to grab the port semaphore. This should
+ reduce races.
+ Reworked the MOD_INC logic a bit to always increment and decrement, even
+ if the generic driver is being used.
+
+ (10/10/2001) gkh
+ usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
+ help prevent child drivers from accessing the device since it is now
+ gone.
+
+ (09/13/2001) gkh
+ Moved generic driver initialize after we have registered with the USB
+ core. Thanks to Randy Dunlap for pointing this problem out.
+
+ (07/03/2001) gkh
+ Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
+ Fixed vendor and product getting defined through the MODULE_PARM macro
+ if the Generic driver wasn't compiled in.
+ Fixed problem with generic_shutdown() not being called for drivers that
+ don't have a shutdown() function.
+
+ (06/06/2001) gkh
+ added evil hack that is needed for the prolific pl2303 device due to the
+ crazy way its endpoints are set up.
+
+ (05/30/2001) gkh
+ switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (04/08/2001) gb
+ Identify version on module load.
+
+ 2001_02_05 gkh
+ Fixed buffer overflows bug with the generic serial driver. Thanks to
+ Todd Squires <squirest@xxxxxxx> for fixing this.
+
+ (01/10/2001) gkh
+ Fixed bug where the generic serial adaptor grabbed _any_ device that was
+ offered to it.
+
+ (12/12/2000) gkh
+ Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
+ moved them to the serial_open and serial_close functions.
+ Also fixed bug with there not being a MOD_DEC for the generic driver
+ (thanks to Gary Brubaker for finding this.)
+
+ (11/29/2000) gkh
+ Small NULL pointer initialization cleanup which saves a bit of disk image
+
+ (11/01/2000) Adam J. Richter
+ instead of using idVendor/idProduct pairs, usb serial drivers
+ now identify their hardware interest with usb_device_id tables,
+ which they usually have anyhow for use with MODULE_DEVICE_TABLE.
+
+ (10/05/2000) gkh
+ Fixed bug with urb->dev not being set properly, now that the usb
+ core needs it.
+
+ (09/11/2000) gkh
+ Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (08/28/2000) gkh
+ Added port_lock to port structure.
+ Added locks for SMP safeness to generic driver
+ Fixed the ability to open a generic device's port more than once.
+
+ (07/23/2000) gkh
+ Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+ Modifications to allow usb-serial drivers to be modules.
+
+ (07/03/2000) gkh
+ Added more debugging to serial_ioctl call
+
+ (06/25/2000) gkh
+ Changed generic_write_bulk_callback to not call wake_up_interruptible
+ directly, but to have port_softint do it at a safer time.
+
+ (06/23/2000) gkh
+ Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (05/22/2000) gkh
+ Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
+ removed from the individual device source files.
+
+ (05/03/2000) gkh
+ Added the Digi Acceleport driver from Al Borchers and Peter Berger.
+
+ (05/02/2000) gkh
+ Changed devfs and tty register code to work properly now. This was based on
+ the ACM driver changes by Vojtech Pavlik.
+
+ (04/27/2000) Ryan VanderBijl
+ Put calls to *_paranoia_checks into one function.
+
+ (04/23/2000) gkh
+ Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
+ Moved when the startup code printed out the devices that are supported.
+
+ (04/19/2000) gkh
+ Added driver for ZyXEL omni.net lcd plus ISDN TA
+ Made startup info message specify which drivers were compiled in.
+
+ (04/03/2000) gkh
+ Changed the probe process to remove the module unload races.
+ Changed where the tty layer gets initialized to have devfs work nicer.
+ Added initial devfs support.
+
+ (03/26/2000) gkh
+ Split driver up into device specific pieces.
+
+ (03/19/2000) gkh
+ Fixed oops that could happen when device was removed while a program
+ was talking to the device.
+ Removed the static urbs and now all urbs are created and destroyed
+ dynamically.
+ Reworked the internal interface. Now everything is based on the
+ usb_serial_port structure instead of the larger usb_serial structure.
+ This fixes the bug that a multiport device could not have more than
+ one port open at one time.
+
+ (03/17/2000) gkh
+ Added config option for debugging messages.
+ Added patch for keyspan pda from Brian Warner.
+
+ (03/06/2000) gkh
+ Added the keyspan pda code from Brian Warner <warner@xxxxxxxxxx>
+ Moved a bunch of the port specific stuff into its own structure. This
+ is in anticipation of the true multiport devices (there's a bug if you
+ try to access more than one port of any multiport device right now)
+
+ (02/21/2000) gkh
+ Made it so that any serial devices only have to specify which functions
+ they want to overload from the generic function calls (great,
+ inheritance in C, in a driver, just what I wanted...)
+ Added support for set_termios and ioctl function calls. No drivers take
+ advantage of this yet.
+ Removed the #ifdef MODULE, now there is no module specific code.
+ Cleaned up a few comments in usb-serial.h that were wrong (thanks again
+ to Miles Lott).
+ Small fix to get_free_serial.
+
+ (02/14/2000) gkh
+ Removed the Belkin and Peracom functionality from the driver due to
+ the lack of support from the vendor, and me not wanting people to
+ accidenatly buy the device, expecting it to work with Linux.
+ Added read_bulk_callback and write_bulk_callback to the type structure
+ for the needs of the FTDI and WhiteHEAT driver.
+ Changed all reverences to FTDI to FTDI_SIO at the request of Bill
+ Ryder.
+ Changed the output urb size back to the max endpoint size to make
+ the ftdi_sio driver have it easier, and due to the fact that it didn't
+ really increase the speed any.
+
+ (02/11/2000) gkh
+ Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
+ patch from Miles Lott (milos@xxxxxxxxxx).
+ Fixed bug with not restoring the minor range that a device grabs, if
+ the startup function fails (thanks Miles for finding this).
+
+ (02/05/2000) gkh
+ Added initial framework for the Keyspan PDA serial converter so that
+ Brian Warner has a place to put his code.
+ Made the ezusb specific functions generic enough that different
+ devices can use them (whiteheat and keyspan_pda both need them).
+ Split out a whole bunch of structure and other stuff to a separate
+ usb-serial.h file.
+ Made the Visor connection messages a little more understandable, now
+ that Miles Lott (milos@xxxxxxxxxx) has gotten the Generic channel to
+ work. Also made them always show up in the log file.
+
+ (01/25/2000) gkh
+ Added initial framework for FTDI serial converter so that Bill Ryder
+ has a place to put his code.
+ Added the vendor specific info from Handspring. Now we can print out
+ informational debug messages as well as understand what is happening.
+
+ (01/23/2000) gkh
+ Fixed problem of crash when trying to open a port that didn't have a
+ device assigned to it. Made the minor node finding a little smarter,
+ now it looks to find a continuous space for the new device.
+
+ (01/21/2000) gkh
+ Fixed bug in visor_startup with patch from Miles Lott (milos@xxxxxxxxxx)
+ Fixed get_serial_by_minor which was all messed up for multi port
+ devices. Fixed multi port problem for generic devices. Now the number
+ of ports is determined by the number of bulk out endpoints for the
+ generic device.
+
+ (01/19/2000) gkh
+ Removed lots of cruft that was around from the old (pre urb) driver
+ interface.
+ Made the serial_table dynamic. This should save lots of memory when
+ the number of minor nodes goes up to 256.
+ Added initial support for devices that have more than one port.
+ Added more debugging comments for the Visor, and added a needed
+ set_configuration call.
+
+ (01/17/2000) gkh
+ Fixed the WhiteHEAT firmware (my processing tool had a bug)
+ and added new debug loader firmware for it.
+ Removed the put_char function as it isn't really needed.
+ Added visor startup commands as found by the Win98 dump.
+
+ (01/13/2000) gkh
+ Fixed the vendor id for the generic driver to the one I meant it to be.
+
+ (01/12/2000) gkh
+ Forget the version numbering...that's pretty useless...
+ Made the driver able to be compiled so that the user can select which
+ converter they want to use. This allows people who only want the Visor
+ support to not pay the memory size price of the WhiteHEAT.
+ Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
+ grabbed the root hub. Not good.
+
+ version 0.4.0 (01/10/2000) gkh
+ Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
+ device. Added startup function to allow firmware to be downloaded to
+ a device if it needs to be.
+ Added firmware download logic to the WhiteHEAT device.
+ Started to add #defines to split up the different drivers for potential
+ configuration option.
+
+ version 0.3.1 (12/30/99) gkh
+ Fixed problems with urb for bulk out.
+ Added initial support for multiple sets of endpoints. This enables
+ the Handspring Visor to be attached successfully. Only the first
+ bulk in / bulk out endpoint pair is being used right now.
+
+ version 0.3.0 (12/27/99) gkh
+ Added initial support for the Handspring Visor based on a patch from
+ Miles Lott (milos@xxxxxxxxxxxxxxxxx)
+ Cleaned up the code a bunch and converted over to using urbs only.
+
+ version 0.2.3 (12/21/99) gkh
+ Added initial support for the Connect Tech WhiteHEAT converter.
+ Incremented the number of ports in expectation of getting the
+ WhiteHEAT to work properly (4 ports per connection).
+ Added notification on insertion and removal of what port the
+ device is/was connected to (and what kind of device it was).
+
+ version 0.2.2 (12/16/99) gkh
+ Changed major number to the new allocated number. We're legal now!
+
+ version 0.2.1 (12/14/99) gkh
+ Fixed bug that happens when device node is opened when there isn't a
+ device attached to it. Thanks to marek@xxxxxxxxxxxx for noticing this.
+
+ version 0.2.0 (11/10/99) gkh
+ Split up internals to make it easier to add different types of serial
+ converters to the code.
+ Added a "generic" driver that gets it's vendor and product id
+ from when the module is loaded. Thanks to David E. Nelson (dnelson@xxxxxxxx)
+ for the idea and sample code (from the usb scanner driver.)
+ Cleared up any licensing questions by releasing it under the GNU GPL.
+
+ version 0.1.2 (10/25/99) gkh
+ Fixed bug in detecting device.
+
+ version 0.1.1 (10/05/99) gkh
+ Changed the major number to not conflict with anything else.
+
+ version 0.1 (09/28/99) gkh
+ Can recognize the two different devices and start up a read from
+ device when asked to. Writes also work. No control signals yet, this
+ all is vendor specific data (i.e. no spec), also no control for
+ different baud rates or other bit settings.
+ Currently we are using the same devid as the acm driver. This needs
+ to change.
+
+-----------------------------------------------------------------------
+visor.c Change Log comments:
+
+ (06/03/2003) Judd Montgomery <judd at jpilot.org>
+ Added support for module parameter options for untested/unknown
+ devices.
+
+ (03/09/2003) gkh
+ Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
+ <brachtl@xxxxxxxxxx> for the information.
+
+ (03/05/2003) gkh
+ Think Treo support is now working.
+
+ (04/03/2002) gkh
+ Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
+ <hiro@xxxxxxxxx> for the information.
+
+ (03/27/2002) gkh
+ Removed assumptions that port->tty was always valid (is not true
+ for usb serial console devices.)
+
+ (03/23/2002) gkh
+ Added support for the Palm i705 device, thanks to Thomas Riemer
+ <tom@xxxxxxxxxxx> for the information.
+
+ (03/21/2002) gkh
+ Added support for the Palm m130 device, thanks to Udo Eisenbarth
+ <udo.eisenbarth@xxxxxx> for the information.
+
+ (02/27/2002) gkh
+ Reworked the urb handling logic. We have no more pool, but dynamically
+ allocate the urb and the transfer buffer on the fly. In testing this
+ does not incure any measurable overhead. This also relies on the fact
+ that we have proper reference counting logic for urbs.
+
+ (02/21/2002) SilaS
+ Added initial support for the Palm m515 devices.
+
+ (02/14/2002) gkh
+ Added support for the Clie S-360 device.
+
+ (12/18/2001) gkh
+ Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
+ for the patch.
+
+ (11/11/2001) gkh
+ Added support for the m125 devices, and added check to prevent oopses
+ for Clié devices that lie about the number of ports they have.
+
+ (08/30/2001) gkh
+ Added support for the Clie devices, both the 3.5 and 4.0 os versions.
+ Many thanks to Daniel Burke, and Bryan Payne for helping with this.
+
+ (08/23/2001) gkh
+ fixed a few potential bugs pointed out by Oliver Neukum.
+
+ (05/30/2001) gkh
+ switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (05/28/2000) gkh
+ Added initial support for the Palm m500 and Palm m505 devices.
+
+ (04/08/2001) gb
+ Identify version on module load.
+
+ (01/21/2000) gkh
+ Added write_room and chars_in_buffer, as they were previously using the
+ generic driver versions which is all wrong now that we are using an urb
+ pool. Thanks to Wolfgang Grandegger for pointing this out to me.
+ Removed count assignment in the write function, which was not needed anymore
+ either. Thanks to Al Borchers for pointing this out.
+
+ (12/12/2000) gkh
+ Moved MOD_DEC to end of visor_close to be nicer, as the final write
+ message can sleep.
+
+ (11/12/2000) gkh
+ Fixed bug with data being dropped on the floor by forcing tty->low_latency
+ to be on. Hopefully this fixes the OHCI issue!
+
+ (11/01/2000) Adam J. Richter
+ usb_device_id table support
+
+ (10/05/2000) gkh
+ Fixed bug with urb->dev not being set properly, now that the usb
+ core needs it.
+
+ (09/11/2000) gkh
+ Got rid of always calling kmalloc for every urb we wrote out to the
+ device.
+ Added visor_read_callback so we can keep track of bytes in and out for
+ those people who like to know the speed of their device.
+ Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (09/06/2000) gkh
+ Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
+ the host controller drivers set urb->dev = NULL when the urb is finished.
+
+ (08/28/2000) gkh
+ Added locks for SMP safeness.
+
+ (08/08/2000) gkh
+ Fixed endian problem in visor_startup.
+ Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
+ than once.
+
+ (07/23/2000) gkh
+ Added pool of write urbs to speed up transfers to the visor.
+
+ (07/19/2000) gkh
+ Added module_init and module_exit functions to handle the fact that this
+ driver is a loadable module now.
+
+ (07/03/2000) gkh
+ Added visor_set_ioctl and visor_set_termios functions (they don't do much
+ of anything, but are good for debugging.)
+
+ (06/25/2000) gkh
+ Fixed bug in visor_unthrottle that should help with the disconnect in PPP
+ bug that people have been reporting.
+
+ (06/23/2000) gkh
+ Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (04/27/2000) Ryan VanderBijl
+ Fixed memory leak in visor_close
+
+ (03/26/2000) gkh
+ Split driver up into device specific pieces.
+
+-----------------------------------------------------------------------
+pl2303.c Change Log comments:
+
+ 2002_Mar_26 gkh
+ allowed driver to work properly if there is no tty assigned to a port
+ (this happens for serial console devices.)
+
+ 2001_Oct_06 gkh
+ Added RTS and DTR line control. Thanks to joe@xxxxxxxx for parts of it.
+
+ 2001_Sep_19 gkh
+ Added break support.
+
+ 2001_Aug_30 gkh
+ fixed oops in write_bulk_callback.
+
+ 2001_Aug_28 gkh
+ reworked buffer logic to be like other usb-serial drivers. Hopefully
+ removing some reported problems.
+
+ 2001_Jun_06 gkh
+ finished porting to 2.4 format.
+
+
+-----------------------------------------------------------------------
+io_edgeport.c Change Log comments:
+
+ 2003_04_03 al borchers
+ - fixed a bug (that shows up with dosemu) where the tty struct is
+ used in a callback after it has been freed
+
+ 2.3 2002_03_08 greg kroah-hartman
+ - fixed bug when multiple devices were attached at the same time.
+
+ 2.2 2001_11_14 greg kroah-hartman
+ - fixed bug in edge_close that kept the port from being used more
+ than once.
+ - fixed memory leak on device removal.
+ - fixed potential double free of memory when command urb submitting
+ failed.
+ - other small cleanups when the device is removed
+
+ 2.1 2001_07_09 greg kroah-hartman
+ - added support for TIOCMBIS and TIOCMBIC.
+
+ (04/08/2001) gb
+ - Identify version on module load.
+
+ 2.0 2001_03_05 greg kroah-hartman
+ - reworked entire driver to fit properly in with the other usb-serial
+ drivers. Occasional oopses still happen, but it's a good start.
+
+ 1.2.3 (02/23/2001) greg kroah-hartman
+ - changed device table to work properly for 2.4.x final format.
+ - fixed problem with dropping data at high data rates.
+
+ 1.2.2 (11/27/2000) greg kroah-hartman
+ - cleaned up more NTisms.
+ - Added device table for 2.4.0-test11
+
+ 1.2.1 (11/08/2000) greg kroah-hartman
+ - Started to clean up NTisms.
+ - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
+
+ 1.2 (10/17/2000) David Iacovelli
+ Remove all EPIC code and GPL source
+ Fix RELEVANT_IFLAG macro to include flow control
+ changes port configuration changes.
+ Fix redefinition of SERIAL_MAGIC
+ Change all timeout values to 5 seconds
+ Tried to fix the UHCI multiple urb submission, but failed miserably.
+ it seems to work fine with OHCI.
+ ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
+ find a way to work arount this UHCI bug )
+
+ 1.1 (10/11/2000) David Iacovelli
+ Fix XON/XOFF flow control to support both IXON and IXOFF
+
+ 0.9.27 (06/30/2000) David Iacovelli
+ Added transmit queue and now allocate urb for command writes.
+
+ 0.9.26 (06/29/2000) David Iacovelli
+ Add support for 80251 based edgeport
+
+ 0.9.25 (06/27/2000) David Iacovelli
+ Do not close the port if it has multiple opens.
+
+ 0.9.24 (05/26/2000) David Iacovelli
+ Add IOCTLs to support RXTX and JAVA POS
+ and first cut at running BlackBox Demo
+
+ 0.9.23 (05/24/2000) David Iacovelli
+ Add IOCTLs to support RXTX and JAVA POS
+
+ 0.9.22 (05/23/2000) David Iacovelli
+ fixed bug in enumeration. If epconfig turns on mapping by
+ path after a device is already plugged in, we now update
+ the mapping correctly
+
+ 0.9.21 (05/16/2000) David Iacovelli
+ Added BlockUntilChaseResp() to also wait for txcredits
+ Updated the way we allocate and handle write URBs
+ Add debug code to dump buffers
+
+ 0.9.20 (05/01/2000) David Iacovelli
+ change driver to use usb/tts/
+
+ 0.9.19 (05/01/2000) David Iacovelli
+ Update code to compile if DEBUG is off
+
+ 0.9.18 (04/28/2000) David Iacovelli
+ cleanup and test tty_register with devfs
+
+ 0.9.17 (04/27/2000) greg kroah-hartman
+ changed tty_register around to be like the way it
+ was before, but now it works properly with devfs.
+
+ 0.9.16 (04/26/2000) david iacovelli
+ Fixed bug in GetProductInfo()
+
+ 0.9.15 (04/25/2000) david iacovelli
+ Updated enumeration
+
+ 0.9.14 (04/24/2000) david iacovelli
+ Removed all config/status IOCTLS and
+ converted to using /proc/edgeport
+ still playing with devfs
+
+ 0.9.13 (04/24/2000) david iacovelli
+ Removed configuration based on ttyUSB0
+ Added support for configuration using /prod/edgeport
+ first attempt at using devfs (not working yet!)
+ Added IOCTL to GetProductInfo()
+ Added support for custom baud rates
+ Add support for random port numbers
+
+ 0.9.12 (04/18/2000) david iacovelli
+ added additional configuration IOCTLs
+ use ttyUSB0 for configuration
+
+ 0.9.11 (04/17/2000) greg kroah-hartman
+ fixed module initialization race conditions.
+ made all urbs dynamically allocated.
+ made driver devfs compatible. now it only registers the tty device
+ when the device is actually plugged in.
+
+ 0.9.10 (04/13/2000) greg kroah-hartman
+ added proc interface framework.
+
+ 0.9.9 (04/13/2000) david iacovelli
+ added enumeration code and ioctls to configure the device
+
+ 0.9.8 (04/12/2000) david iacovelli
+ Change interrupt read start when device is plugged in
+ and stop when device is removed
+ process interrupt reads when all ports are closed
+ (keep value of rxBytesAvail consistent with the edgeport)
+ set the USB_BULK_QUEUE flag so that we can shove a bunch
+ of urbs at once down the pipe
+
+ 0.9.7 (04/10/2000) david iacovelli
+ start to add enumeration code.
+ generate serial number for epic devices
+ add support for kdb
+
+ 0.9.6 (03/30/2000) david iacovelli
+ add IOCTL to get string, manufacture, and boot descriptors
+
+ 0.9.5 (03/14/2000) greg kroah-hartman
+ more error checking added to SerialOpen to try to fix UHCI open problem
+
+ 0.9.4 (03/09/2000) greg kroah-hartman
+ added more error checking to handle oops when data is hanging
+ around and tty is abruptly closed.
+
+ 0.9.3 (03/09/2000) david iacovelli
+ Add epic support for xon/xoff chars
+ play with performance
+
+ 0.9.2 (03/08/2000) greg kroah-hartman
+ changed most "info" calls to "dbg"
+ implemented flow control properly in the termios call
+
+ 0.9.1 (03/08/2000) david iacovelli
+ added EPIC support
+ enabled bootloader update
+
+ 0.9 (03/08/2000) greg kroah-hartman
+ Release to IO networks.
+ Integrated changes that David made
+ made getting urbs for writing SMP safe
+
+ 0.8 (03/07/2000) greg kroah-hartman
+ Release to IO networks.
+ Fixed problems that were seen in code by David.
+ Now both Edgeport/4 and Edgeport/2 works properly.
+ Changed most of the functions to use port instead of serial.
+
+ 0.7 (02/27/2000) greg kroah-hartman
+ Milestone 3 release.
+ Release to IO Networks
+ ioctl for waiting on line change implemented.
+ ioctl for getting statistics implemented.
+ multiport support working.
+ lsr and msr registers are now handled properly.
+ change break now hooked up and working.
+ support for all known Edgeport devices.
+
+ 0.6 (02/22/2000) greg kroah-hartman
+ Release to IO networks.
+ CHASE is implemented correctly when port is closed.
+ SerialOpen now blocks correctly until port is fully opened.
+
+ 0.5 (02/20/2000) greg kroah-hartman
+ Release to IO networks.
+ Known problems:
+ modem status register changes are not sent on to the user
+ CHASE is not implemented when the port is closed.
+
+ 0.4 (02/16/2000) greg kroah-hartman
+ Second cut at the CeBit demo.
+ Doesn't leak memory on every write to the port
+ Still small leaks on startup.
+ Added support for Edgeport/2 and Edgeport/8
+
+ 0.3 (02/15/2000) greg kroah-hartman
+ CeBit demo release.
+ Force the line settings to 4800, 8, 1, e for the demo.
+ Warning! This version leaks memory like crazy!
+
+ 0.2 (01/30/2000) greg kroah-hartman
+ Milestone 1 release.
+ Device is found by USB subsystem, enumerated, fimware is downloaded
+ and the descriptors are printed to the debug log, config is set, and
+ green light starts to blink. Open port works, and data can be sent
+ and received at the default settings of the UART. Loopback connector
+ and debug log confirms this.
+
+ 0.1 (01/23/2000) greg kroah-hartman
+ Initial release to help IO Networks try to set up their test system.
+ Edgeport4 is recognized, firmware is downloaded, config is set so
+ device blinks green light every 3 sec. Port is bound, but opening,
+ closing, and sending data do not work properly.
+
+
--- usb-2.6.orig/drivers/usb/serial/ChangeLog.old
+++ /dev/null
@@ -1,730 +0,0 @@
-This is the contents of some of the drivers/usb/serial/ files that had old
-changelog comments. They were quite old, and out of date, and we don't keep
-them anymore, so I've put them here, away from the source files, in case
-people still care to see them.
-
-- Greg Kroah-Hartman <greg@xxxxxxxxx> October 20, 2005
-
------------------------------------------------------------------------
-usb-serial.h Change Log comments:
-
- (03/26/2002) gkh
- removed the port->tty check from port_paranoia_check() due to serial
- consoles not having a tty device assigned to them.
-
- (12/03/2001) gkh
- removed active from the port structure.
- added documentation to the usb_serial_device_type structure
-
- (10/10/2001) gkh
- added vendor and product to serial structure. Needed to determine device
- owner when the device is disconnected.
-
- (05/30/2001) gkh
- added sem to port structure and removed port_lock
-
- (10/05/2000) gkh
- Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
- fix bug with urb->dev not being set properly, now that the usb core
- needs it.
-
- (09/11/2000) gkh
- Added usb_serial_debug_data function to help get rid of #DEBUG in the
- drivers.
-
- (08/28/2000) gkh
- Added port_lock to port structure.
-
- (08/08/2000) gkh
- Added open_count to port structure.
-
- (07/23/2000) gkh
- Added bulk_out_endpointAddress to port structure.
-
- (07/19/2000) gkh, pberger, and borchers
- Modifications to allow usb-serial drivers to be modules.
-
------------------------------------------------------------------------
-usb-serial.c Change Log comments:
-
- (12/10/2002) gkh
- Split the ports off into their own struct device, and added a
- usb-serial bus driver.
-
- (11/19/2002) gkh
- removed a few #ifdefs for the generic code and cleaned up the failure
- logic in initialization.
-
- (10/02/2002) gkh
- moved the console code to console.c and out of this file.
-
- (06/05/2002) gkh
- moved location of startup() call in serial_probe() until after all
- of the port information and endpoints are initialized. This makes
- things easier for some drivers.
-
- (04/10/2002) gkh
- added serial_read_proc function which creates a
- /proc/tty/driver/usb-serial file.
-
- (03/27/2002) gkh
- Got USB serial console code working properly and merged into the main
- version of the tree. Thanks to Randy Dunlap for the initial version
- of this code, and for pushing me to finish it up.
- The USB serial console works with any usb serial driver device.
-
- (03/21/2002) gkh
- Moved all manipulation of port->open_count into the core. Now the
- individual driver's open and close functions are called only when the
- first open() and last close() is called. Making the drivers a bit
- smaller and simpler.
- Fixed a bug if a driver didn't have the owner field set.
-
- (02/26/2002) gkh
- Moved all locking into the main serial_* functions, instead of having
- the individual drivers have to grab the port semaphore. This should
- reduce races.
- Reworked the MOD_INC logic a bit to always increment and decrement, even
- if the generic driver is being used.
-
- (10/10/2001) gkh
- usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
- help prevent child drivers from accessing the device since it is now
- gone.
-
- (09/13/2001) gkh
- Moved generic driver initialize after we have registered with the USB
- core. Thanks to Randy Dunlap for pointing this problem out.
-
- (07/03/2001) gkh
- Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
- Fixed vendor and product getting defined through the MODULE_PARM macro
- if the Generic driver wasn't compiled in.
- Fixed problem with generic_shutdown() not being called for drivers that
- don't have a shutdown() function.
-
- (06/06/2001) gkh
- added evil hack that is needed for the prolific pl2303 device due to the
- crazy way its endpoints are set up.
-
- (05/30/2001) gkh
- switched from using spinlock to a semaphore, which fixes lots of problems.
-
- (04/08/2001) gb
- Identify version on module load.
-
- 2001_02_05 gkh
- Fixed buffer overflows bug with the generic serial driver. Thanks to
- Todd Squires <squirest@xxxxxxx> for fixing this.
-
- (01/10/2001) gkh
- Fixed bug where the generic serial adaptor grabbed _any_ device that was
- offered to it.
-
- (12/12/2000) gkh
- Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
- moved them to the serial_open and serial_close functions.
- Also fixed bug with there not being a MOD_DEC for the generic driver
- (thanks to Gary Brubaker for finding this.)
-
- (11/29/2000) gkh
- Small NULL pointer initialization cleanup which saves a bit of disk image
-
- (11/01/2000) Adam J. Richter
- instead of using idVendor/idProduct pairs, usb serial drivers
- now identify their hardware interest with usb_device_id tables,
- which they usually have anyhow for use with MODULE_DEVICE_TABLE.
-
- (10/05/2000) gkh
- Fixed bug with urb->dev not being set properly, now that the usb
- core needs it.
-
- (09/11/2000) gkh
- Removed DEBUG #ifdefs with call to usb_serial_debug_data
-
- (08/28/2000) gkh
- Added port_lock to port structure.
- Added locks for SMP safeness to generic driver
- Fixed the ability to open a generic device's port more than once.
-
- (07/23/2000) gkh
- Added bulk_out_endpointAddress to port structure.
-
- (07/19/2000) gkh, pberger, and borchers
- Modifications to allow usb-serial drivers to be modules.
-
- (07/03/2000) gkh
- Added more debugging to serial_ioctl call
-
- (06/25/2000) gkh
- Changed generic_write_bulk_callback to not call wake_up_interruptible
- directly, but to have port_softint do it at a safer time.
-
- (06/23/2000) gkh
- Cleaned up debugging statements in a quest to find UHCI timeout bug.
-
- (05/22/2000) gkh
- Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
- removed from the individual device source files.
-
- (05/03/2000) gkh
- Added the Digi Acceleport driver from Al Borchers and Peter Berger.
-
- (05/02/2000) gkh
- Changed devfs and tty register code to work properly now. This was based on
- the ACM driver changes by Vojtech Pavlik.
-
- (04/27/2000) Ryan VanderBijl
- Put calls to *_paranoia_checks into one function.
-
- (04/23/2000) gkh
- Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
- Moved when the startup code printed out the devices that are supported.
-
- (04/19/2000) gkh
- Added driver for ZyXEL omni.net lcd plus ISDN TA
- Made startup info message specify which drivers were compiled in.
-
- (04/03/2000) gkh
- Changed the probe process to remove the module unload races.
- Changed where the tty layer gets initialized to have devfs work nicer.
- Added initial devfs support.
-
- (03/26/2000) gkh
- Split driver up into device specific pieces.
-
- (03/19/2000) gkh
- Fixed oops that could happen when device was removed while a program
- was talking to the device.
- Removed the static urbs and now all urbs are created and destroyed
- dynamically.
- Reworked the internal interface. Now everything is based on the
- usb_serial_port structure instead of the larger usb_serial structure.
- This fixes the bug that a multiport device could not have more than
- one port open at one time.
-
- (03/17/2000) gkh
- Added config option for debugging messages.
- Added patch for keyspan pda from Brian Warner.
-
- (03/06/2000) gkh
- Added the keyspan pda code from Brian Warner <warner@xxxxxxxxxx>
- Moved a bunch of the port specific stuff into its own structure. This
- is in anticipation of the true multiport devices (there's a bug if you
- try to access more than one port of any multiport device right now)
-
- (02/21/2000) gkh
- Made it so that any serial devices only have to specify which functions
- they want to overload from the generic function calls (great,
- inheritance in C, in a driver, just what I wanted...)
- Added support for set_termios and ioctl function calls. No drivers take
- advantage of this yet.
- Removed the #ifdef MODULE, now there is no module specific code.
- Cleaned up a few comments in usb-serial.h that were wrong (thanks again
- to Miles Lott).
- Small fix to get_free_serial.
-
- (02/14/2000) gkh
- Removed the Belkin and Peracom functionality from the driver due to
- the lack of support from the vendor, and me not wanting people to
- accidenatly buy the device, expecting it to work with Linux.
- Added read_bulk_callback and write_bulk_callback to the type structure
- for the needs of the FTDI and WhiteHEAT driver.
- Changed all reverences to FTDI to FTDI_SIO at the request of Bill
- Ryder.
- Changed the output urb size back to the max endpoint size to make
- the ftdi_sio driver have it easier, and due to the fact that it didn't
- really increase the speed any.
-
- (02/11/2000) gkh
- Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
- patch from Miles Lott (milos@xxxxxxxxxx).
- Fixed bug with not restoring the minor range that a device grabs, if
- the startup function fails (thanks Miles for finding this).
-
- (02/05/2000) gkh
- Added initial framework for the Keyspan PDA serial converter so that
- Brian Warner has a place to put his code.
- Made the ezusb specific functions generic enough that different
- devices can use them (whiteheat and keyspan_pda both need them).
- Split out a whole bunch of structure and other stuff to a separate
- usb-serial.h file.
- Made the Visor connection messages a little more understandable, now
- that Miles Lott (milos@xxxxxxxxxx) has gotten the Generic channel to
- work. Also made them always show up in the log file.
-
- (01/25/2000) gkh
- Added initial framework for FTDI serial converter so that Bill Ryder
- has a place to put his code.
- Added the vendor specific info from Handspring. Now we can print out
- informational debug messages as well as understand what is happening.
-
- (01/23/2000) gkh
- Fixed problem of crash when trying to open a port that didn't have a
- device assigned to it. Made the minor node finding a little smarter,
- now it looks to find a continuous space for the new device.
-
- (01/21/2000) gkh
- Fixed bug in visor_startup with patch from Miles Lott (milos@xxxxxxxxxx)
- Fixed get_serial_by_minor which was all messed up for multi port
- devices. Fixed multi port problem for generic devices. Now the number
- of ports is determined by the number of bulk out endpoints for the
- generic device.
-
- (01/19/2000) gkh
- Removed lots of cruft that was around from the old (pre urb) driver
- interface.
- Made the serial_table dynamic. This should save lots of memory when
- the number of minor nodes goes up to 256.
- Added initial support for devices that have more than one port.
- Added more debugging comments for the Visor, and added a needed
- set_configuration call.
-
- (01/17/2000) gkh
- Fixed the WhiteHEAT firmware (my processing tool had a bug)
- and added new debug loader firmware for it.
- Removed the put_char function as it isn't really needed.
- Added visor startup commands as found by the Win98 dump.
-
- (01/13/2000) gkh
- Fixed the vendor id for the generic driver to the one I meant it to be.
-
- (01/12/2000) gkh
- Forget the version numbering...that's pretty useless...
- Made the driver able to be compiled so that the user can select which
- converter they want to use. This allows people who only want the Visor
- support to not pay the memory size price of the WhiteHEAT.
- Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
- grabbed the root hub. Not good.
-
- version 0.4.0 (01/10/2000) gkh
- Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
- device. Added startup function to allow firmware to be downloaded to
- a device if it needs to be.
- Added firmware download logic to the WhiteHEAT device.
- Started to add #defines to split up the different drivers for potential
- configuration option.
-
- version 0.3.1 (12/30/99) gkh
- Fixed problems with urb for bulk out.
- Added initial support for multiple sets of endpoints. This enables
- the Handspring Visor to be attached successfully. Only the first
- bulk in / bulk out endpoint pair is being used right now.
-
- version 0.3.0 (12/27/99) gkh
- Added initial support for the Handspring Visor based on a patch from
- Miles Lott (milos@xxxxxxxxxxxxxxxxx)
- Cleaned up the code a bunch and converted over to using urbs only.
-
- version 0.2.3 (12/21/99) gkh
- Added initial support for the Connect Tech WhiteHEAT converter.
- Incremented the number of ports in expectation of getting the
- WhiteHEAT to work properly (4 ports per connection).
- Added notification on insertion and removal of what port the
- device is/was connected to (and what kind of device it was).
-
- version 0.2.2 (12/16/99) gkh
- Changed major number to the new allocated number. We're legal now!
-
- version 0.2.1 (12/14/99) gkh
- Fixed bug that happens when device node is opened when there isn't a
- device attached to it. Thanks to marek@xxxxxxxxxxxx for noticing this.
-
- version 0.2.0 (11/10/99) gkh
- Split up internals to make it easier to add different types of serial
- converters to the code.
- Added a "generic" driver that gets it's vendor and product id
- from when the module is loaded. Thanks to David E. Nelson (dnelson@xxxxxxxx)
- for the idea and sample code (from the usb scanner driver.)
- Cleared up any licensing questions by releasing it under the GNU GPL.
-
- version 0.1.2 (10/25/99) gkh
- Fixed bug in detecting device.
-
- version 0.1.1 (10/05/99) gkh
- Changed the major number to not conflict with anything else.
-
- version 0.1 (09/28/99) gkh
- Can recognize the two different devices and start up a read from
- device when asked to. Writes also work. No control signals yet, this
- all is vendor specific data (i.e. no spec), also no control for
- different baud rates or other bit settings.
- Currently we are using the same devid as the acm driver. This needs
- to change.
-
------------------------------------------------------------------------
-visor.c Change Log comments:
-
- (06/03/2003) Judd Montgomery <judd at jpilot.org>
- Added support for module parameter options for untested/unknown
- devices.
-
- (03/09/2003) gkh
- Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
- <brachtl@xxxxxxxxxx> for the information.
-
- (03/05/2003) gkh
- Think Treo support is now working.
-
- (04/03/2002) gkh
- Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
- <hiro@xxxxxxxxx> for the information.
-
- (03/27/2002) gkh
- Removed assumptions that port->tty was always valid (is not true
- for usb serial console devices.)
-
- (03/23/2002) gkh
- Added support for the Palm i705 device, thanks to Thomas Riemer
- <tom@xxxxxxxxxxx> for the information.
-
- (03/21/2002) gkh
- Added support for the Palm m130 device, thanks to Udo Eisenbarth
- <udo.eisenbarth@xxxxxx> for the information.
-
- (02/27/2002) gkh
- Reworked the urb handling logic. We have no more pool, but dynamically
- allocate the urb and the transfer buffer on the fly. In testing this
- does not incure any measurable overhead. This also relies on the fact
- that we have proper reference counting logic for urbs.
-
- (02/21/2002) SilaS
- Added initial support for the Palm m515 devices.
-
- (02/14/2002) gkh
- Added support for the Clie S-360 device.
-
- (12/18/2001) gkh
- Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
- for the patch.
-
- (11/11/2001) gkh
- Added support for the m125 devices, and added check to prevent oopses
- for CliƩ devices that lie about the number of ports they have.
-
- (08/30/2001) gkh
- Added support for the Clie devices, both the 3.5 and 4.0 os versions.
- Many thanks to Daniel Burke, and Bryan Payne for helping with this.
-
- (08/23/2001) gkh
- fixed a few potential bugs pointed out by Oliver Neukum.
-
- (05/30/2001) gkh
- switched from using spinlock to a semaphore, which fixes lots of problems.
-
- (05/28/2000) gkh
- Added initial support for the Palm m500 and Palm m505 devices.
-
- (04/08/2001) gb
- Identify version on module load.
-
- (01/21/2000) gkh
- Added write_room and chars_in_buffer, as they were previously using the
- generic driver versions which is all wrong now that we are using an urb
- pool. Thanks to Wolfgang Grandegger for pointing this out to me.
- Removed count assignment in the write function, which was not needed anymore
- either. Thanks to Al Borchers for pointing this out.
-
- (12/12/2000) gkh
- Moved MOD_DEC to end of visor_close to be nicer, as the final write
- message can sleep.
-
- (11/12/2000) gkh
- Fixed bug with data being dropped on the floor by forcing tty->low_latency
- to be on. Hopefully this fixes the OHCI issue!
-
- (11/01/2000) Adam J. Richter
- usb_device_id table support
-
- (10/05/2000) gkh
- Fixed bug with urb->dev not being set properly, now that the usb
- core needs it.
-
- (09/11/2000) gkh
- Got rid of always calling kmalloc for every urb we wrote out to the
- device.
- Added visor_read_callback so we can keep track of bytes in and out for
- those people who like to know the speed of their device.
- Removed DEBUG #ifdefs with call to usb_serial_debug_data
-
- (09/06/2000) gkh
- Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
- the host controller drivers set urb->dev = NULL when the urb is finished.
-
- (08/28/2000) gkh
- Added locks for SMP safeness.
-
- (08/08/2000) gkh
- Fixed endian problem in visor_startup.
- Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- than once.
-
- (07/23/2000) gkh
- Added pool of write urbs to speed up transfers to the visor.
-
- (07/19/2000) gkh
- Added module_init and module_exit functions to handle the fact that this
- driver is a loadable module now.
-
- (07/03/2000) gkh
- Added visor_set_ioctl and visor_set_termios functions (they don't do much
- of anything, but are good for debugging.)
-
- (06/25/2000) gkh
- Fixed bug in visor_unthrottle that should help with the disconnect in PPP
- bug that people have been reporting.
-
- (06/23/2000) gkh
- Cleaned up debugging statements in a quest to find UHCI timeout bug.
-
- (04/27/2000) Ryan VanderBijl
- Fixed memory leak in visor_close
-
- (03/26/2000) gkh
- Split driver up into device specific pieces.
-
------------------------------------------------------------------------
-pl2303.c Change Log comments:
-
- 2002_Mar_26 gkh
- allowed driver to work properly if there is no tty assigned to a port
- (this happens for serial console devices.)
-
- 2001_Oct_06 gkh
- Added RTS and DTR line control. Thanks to joe@xxxxxxxx for parts of it.
-
- 2001_Sep_19 gkh
- Added break support.
-
- 2001_Aug_30 gkh
- fixed oops in write_bulk_callback.
-
- 2001_Aug_28 gkh
- reworked buffer logic to be like other usb-serial drivers. Hopefully
- removing some reported problems.
-
- 2001_Jun_06 gkh
- finished porting to 2.4 format.
-
-
------------------------------------------------------------------------
-io_edgeport.c Change Log comments:
-
- 2003_04_03 al borchers
- - fixed a bug (that shows up with dosemu) where the tty struct is
- used in a callback after it has been freed
-
- 2.3 2002_03_08 greg kroah-hartman
- - fixed bug when multiple devices were attached at the same time.
-
- 2.2 2001_11_14 greg kroah-hartman
- - fixed bug in edge_close that kept the port from being used more
- than once.
- - fixed memory leak on device removal.
- - fixed potential double free of memory when command urb submitting
- failed.
- - other small cleanups when the device is removed
-
- 2.1 2001_07_09 greg kroah-hartman
- - added support for TIOCMBIS and TIOCMBIC.
-
- (04/08/2001) gb
- - Identify version on module load.
-
- 2.0 2001_03_05 greg kroah-hartman
- - reworked entire driver to fit properly in with the other usb-serial
- drivers. Occasional oopses still happen, but it's a good start.
-
- 1.2.3 (02/23/2001) greg kroah-hartman
- - changed device table to work properly for 2.4.x final format.
- - fixed problem with dropping data at high data rates.
-
- 1.2.2 (11/27/2000) greg kroah-hartman
- - cleaned up more NTisms.
- - Added device table for 2.4.0-test11
-
- 1.2.1 (11/08/2000) greg kroah-hartman
- - Started to clean up NTisms.
- - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
-
- 1.2 (10/17/2000) David Iacovelli
- Remove all EPIC code and GPL source
- Fix RELEVANT_IFLAG macro to include flow control
- changes port configuration changes.
- Fix redefinition of SERIAL_MAGIC
- Change all timeout values to 5 seconds
- Tried to fix the UHCI multiple urb submission, but failed miserably.
- it seems to work fine with OHCI.
- ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
- find a way to work arount this UHCI bug )
-
- 1.1 (10/11/2000) David Iacovelli
- Fix XON/XOFF flow control to support both IXON and IXOFF
-
- 0.9.27 (06/30/2000) David Iacovelli
- Added transmit queue and now allocate urb for command writes.
-
- 0.9.26 (06/29/2000) David Iacovelli
- Add support for 80251 based edgeport
-
- 0.9.25 (06/27/2000) David Iacovelli
- Do not close the port if it has multiple opens.
-
- 0.9.24 (05/26/2000) David Iacovelli
- Add IOCTLs to support RXTX and JAVA POS
- and first cut at running BlackBox Demo
-
- 0.9.23 (05/24/2000) David Iacovelli
- Add IOCTLs to support RXTX and JAVA POS
-
- 0.9.22 (05/23/2000) David Iacovelli
- fixed bug in enumeration. If epconfig turns on mapping by
- path after a device is already plugged in, we now update
- the mapping correctly
-
- 0.9.21 (05/16/2000) David Iacovelli
- Added BlockUntilChaseResp() to also wait for txcredits
- Updated the way we allocate and handle write URBs
- Add debug code to dump buffers
-
- 0.9.20 (05/01/2000) David Iacovelli
- change driver to use usb/tts/
-
- 0.9.19 (05/01/2000) David Iacovelli
- Update code to compile if DEBUG is off
-
- 0.9.18 (04/28/2000) David Iacovelli
- cleanup and test tty_register with devfs
-
- 0.9.17 (04/27/2000) greg kroah-hartman
- changed tty_register around to be like the way it
- was before, but now it works properly with devfs.
-
- 0.9.16 (04/26/2000) david iacovelli
- Fixed bug in GetProductInfo()
-
- 0.9.15 (04/25/2000) david iacovelli
- Updated enumeration
-
- 0.9.14 (04/24/2000) david iacovelli
- Removed all config/status IOCTLS and
- converted to using /proc/edgeport
- still playing with devfs
-
- 0.9.13 (04/24/2000) david iacovelli
- Removed configuration based on ttyUSB0
- Added support for configuration using /prod/edgeport
- first attempt at using devfs (not working yet!)
- Added IOCTL to GetProductInfo()
- Added support for custom baud rates
- Add support for random port numbers
-
- 0.9.12 (04/18/2000) david iacovelli
- added additional configuration IOCTLs
- use ttyUSB0 for configuration
-
- 0.9.11 (04/17/2000) greg kroah-hartman
- fixed module initialization race conditions.
- made all urbs dynamically allocated.
- made driver devfs compatible. now it only registers the tty device
- when the device is actually plugged in.
-
- 0.9.10 (04/13/2000) greg kroah-hartman
- added proc interface framework.
-
- 0.9.9 (04/13/2000) david iacovelli
- added enumeration code and ioctls to configure the device
-
- 0.9.8 (04/12/2000) david iacovelli
- Change interrupt read start when device is plugged in
- and stop when device is removed
- process interrupt reads when all ports are closed
- (keep value of rxBytesAvail consistent with the edgeport)
- set the USB_BULK_QUEUE flag so that we can shove a bunch
- of urbs at once down the pipe
-
- 0.9.7 (04/10/2000) david iacovelli
- start to add enumeration code.
- generate serial number for epic devices
- add support for kdb
-
- 0.9.6 (03/30/2000) david iacovelli
- add IOCTL to get string, manufacture, and boot descriptors
-
- 0.9.5 (03/14/2000) greg kroah-hartman
- more error checking added to SerialOpen to try to fix UHCI open problem
-
- 0.9.4 (03/09/2000) greg kroah-hartman
- added more error checking to handle oops when data is hanging
- around and tty is abruptly closed.
-
- 0.9.3 (03/09/2000) david iacovelli
- Add epic support for xon/xoff chars
- play with performance
-
- 0.9.2 (03/08/2000) greg kroah-hartman
- changed most "info" calls to "dbg"
- implemented flow control properly in the termios call
-
- 0.9.1 (03/08/2000) david iacovelli
- added EPIC support
- enabled bootloader update
-
- 0.9 (03/08/2000) greg kroah-hartman
- Release to IO networks.
- Integrated changes that David made
- made getting urbs for writing SMP safe
-
- 0.8 (03/07/2000) greg kroah-hartman
- Release to IO networks.
- Fixed problems that were seen in code by David.
- Now both Edgeport/4 and Edgeport/2 works properly.
- Changed most of the functions to use port instead of serial.
-
- 0.7 (02/27/2000) greg kroah-hartman
- Milestone 3 release.
- Release to IO Networks
- ioctl for waiting on line change implemented.
- ioctl for getting statistics implemented.
- multiport support working.
- lsr and msr registers are now handled properly.
- change break now hooked up and working.
- support for all known Edgeport devices.
-
- 0.6 (02/22/2000) greg kroah-hartman
- Release to IO networks.
- CHASE is implemented correctly when port is closed.
- SerialOpen now blocks correctly until port is fully opened.
-
- 0.5 (02/20/2000) greg kroah-hartman
- Release to IO networks.
- Known problems:
- modem status register changes are not sent on to the user
- CHASE is not implemented when the port is closed.
-
- 0.4 (02/16/2000) greg kroah-hartman
- Second cut at the CeBit demo.
- Doesn't leak memory on every write to the port
- Still small leaks on startup.
- Added support for Edgeport/2 and Edgeport/8
-
- 0.3 (02/15/2000) greg kroah-hartman
- CeBit demo release.
- Force the line settings to 4800, 8, 1, e for the demo.
- Warning! This version leaks memory like crazy!
-
- 0.2 (01/30/2000) greg kroah-hartman
- Milestone 1 release.
- Device is found by USB subsystem, enumerated, fimware is downloaded
- and the descriptors are printed to the debug log, config is set, and
- green light starts to blink. Open port works, and data can be sent
- and received at the default settings of the UART. Loopback connector
- and debug log confirms this.
-
- 0.1 (01/23/2000) greg kroah-hartman
- Initial release to help IO Networks try to set up their test system.
- Edgeport4 is recognized, firmware is downloaded, config is set so
- device blinks green light every 3 sec. Port is bound, but opening,
- closing, and sending data do not work properly.
-
-

--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/