[git patches] 2.6.x net driver fixes

From: Jeff Garzik
Date: Fri Nov 18 2005 - 15:12:29 EST



Please pull from 'upstream-fixes' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git

to receive the following assorted fixes:

drivers/net/au1000_eth.c | 1
drivers/net/e100.c | 273 ++++++++++++++++++++++++++++++--
drivers/net/fec_8xx/Kconfig | 2
drivers/net/ioc3-eth.c | 2
drivers/net/r8169.c | 6
drivers/net/saa9730.h | 36 ++--
drivers/net/smc91x.c | 17 +
drivers/net/wan/hdlc_cisco.c | 6
drivers/net/wan/hdlc_fr.c | 4
drivers/net/wan/hdlc_generic.c | 6
drivers/net/wireless/hermes.c | 6
drivers/net/wireless/hermes.h | 6
drivers/net/wireless/i82593.h | 11 -
drivers/net/wireless/ipw2100.c | 29 ++-
drivers/net/wireless/ipw2100.h | 2
drivers/net/wireless/prism54/isl_38xx.c | 4
include/net/ieee80211.h | 2
17 files changed, 352 insertions(+), 61 deletions(-)

Andrew Morton:
git-netdev-all-ieee80211_get_payload-warning-fix

Francois Romieu:
r8169: fix printk_ratelimit in the interrupt handler
r8169: do not abort when the power management capabilities are disabled

Gabriel A. Devenyi:
drivers/net/wireless/hermes.c unsigned int comparision

James Ketrenos:
ipw2100: Fix 'Driver using old /proc/net/wireless...' message

Jeff Garzik:
[wireless hermes] build fix

Jesse Brandeburg:
e100: re-enable microcode with more useful defaults

John W. Linville:
i82593.h: make header comment GPL-compatible
fec_8xx: make CONFIG_FEC_8XX depend on CONFIG_8xx

Krzysztof Halasa:
Generic HDLC WAN drivers - disable netif_carrier_off()

Nicolas Pitre:
smc91x: fix one source of spurious interrupts

Ralf Baechle:
IOC3: Replace obsolete PCI API
au1000_eth: Include <linux/config.h>
SAA9730: Add missing header bits.

Roger While:
prism54 : Remove extraneous udelay/register read

Russell King:
smc91x: fix bank mismatch

diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 332e995..cd0b1dc 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -32,6 +32,7 @@
*
*/

+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 7a6aeae..22cd045 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -156,7 +156,7 @@

#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.4.14-k2"DRV_EXT
+#define DRV_VERSION "3.4.14-k4"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation"
#define PFX DRV_NAME ": "
@@ -903,8 +903,8 @@ static void mdio_write(struct net_device

static void e100_get_defaults(struct nic *nic)
{
- struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
- struct param_range cbs = { .min = 64, .max = 256, .count = 64 };
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };

pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
@@ -1007,25 +1007,264 @@ static void e100_configure(struct nic *n
c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
}

+/********************************************************/
+/* Micro code for 8086:1229 Rev 8 */
+/********************************************************/
+
+/* Parameter values for the D101M B-step */
+#define D101M_CPUSAVER_TIMER_DWORD 78
+#define D101M_CPUSAVER_BUNDLE_DWORD 65
+#define D101M_CPUSAVER_MIN_SIZE_DWORD 126
+
+#define D101M_B_RCVBUNDLE_UCODE \
+{\
+0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
+0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
+0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
+0x00380438, 0x00000000, 0x00140000, 0x00380555, \
+0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
+0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
+0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
+0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
+0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
+0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
+0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
+0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
+0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
+0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
+0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
+0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
+0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
+0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
+0x00380559, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
+0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
+0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+/********************************************************/
+/* Micro code for 8086:1229 Rev 9 */
+/********************************************************/
+
+/* Parameter values for the D101S */
+#define D101S_CPUSAVER_TIMER_DWORD 78
+#define D101S_CPUSAVER_BUNDLE_DWORD 67
+#define D101S_CPUSAVER_MIN_SIZE_DWORD 128
+
+#define D101S_RCVBUNDLE_UCODE \
+{\
+0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
+0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
+0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
+0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
+0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
+0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
+0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
+0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
+0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
+0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
+0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
+0x00101313, 0x00380700, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
+0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
+0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
+0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
+0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
+0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
+0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
+0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
+0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00130831, \
+0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
+0x00041000, 0x00010004, 0x00380700 \
+}
+
+/********************************************************/
+/* Micro code for the 8086:1229 Rev F/10 */
+/********************************************************/
+
+/* Parameter values for the D102 E-step */
+#define D102_E_CPUSAVER_TIMER_DWORD 42
+#define D102_E_CPUSAVER_BUNDLE_DWORD 54
+#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46
+
+#define D102_E_RCVBUNDLE_UCODE \
+{\
+0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
+0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
+0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
+0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
+0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
+0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
+0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+}
+
static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
{
- int i;
- static const u32 ucode[UCODE_SIZE] = {
- /* NFS packets are misinterpreted as TCO packets and
- * incorrectly routed to the BMC over SMBus. This
- * microcode patch checks the fragmented IP bit in the
- * NFS/UDP header to distinguish between NFS and TCO. */
- 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
- 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
- 0x00906EFD, 0x00900EFD, 0x00E00EF8,
- };
+/* *INDENT-OFF* */
+ static struct {
+ u32 ucode[UCODE_SIZE + 1];
+ u8 mac;
+ u8 timer_dword;
+ u8 bundle_dword;
+ u8 min_size_dword;
+ } ucode_opts[] = {
+ { D101M_B_RCVBUNDLE_UCODE,
+ mac_82559_D101M,
+ D101M_CPUSAVER_TIMER_DWORD,
+ D101M_CPUSAVER_BUNDLE_DWORD,
+ D101M_CPUSAVER_MIN_SIZE_DWORD },
+ { D101S_RCVBUNDLE_UCODE,
+ mac_82559_D101S,
+ D101S_CPUSAVER_TIMER_DWORD,
+ D101S_CPUSAVER_BUNDLE_DWORD,
+ D101S_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_F,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { D102_E_RCVBUNDLE_UCODE,
+ mac_82551_10,
+ D102_E_CPUSAVER_TIMER_DWORD,
+ D102_E_CPUSAVER_BUNDLE_DWORD,
+ D102_E_CPUSAVER_MIN_SIZE_DWORD },
+ { {0}, 0, 0, 0, 0}
+ }, *opts;
+/* *INDENT-ON* */
+
+/*************************************************************************
+* CPUSaver parameters
+*
+* All CPUSaver parameters are 16-bit literals that are part of a
+* "move immediate value" instruction. By changing the value of
+* the literal in the instruction before the code is loaded, the
+* driver can change the algorithm.
+*
+* INTDELAY - This loads the dead-man timer with its inital value.
+* When this timer expires the interrupt is asserted, and the
+* timer is reset each time a new packet is received. (see
+* BUNDLEMAX below to set the limit on number of chained packets)
+* The current default is 0x600 or 1536. Experiments show that
+* the value should probably stay within the 0x200 - 0x1000.
+*
+* BUNDLEMAX -
+* This sets the maximum number of frames that will be bundled. In
+* some situations, such as the TCP windowing algorithm, it may be
+* better to limit the growth of the bundle size than let it go as
+* high as it can, because that could cause too much added latency.
+* The default is six, because this is the number of packets in the
+* default TCP window size. A value of 1 would make CPUSaver indicate
+* an interrupt for every frame received. If you do not want to put
+* a limit on the bundle size, set this value to xFFFF.
+*
+* BUNDLESMALL -
+* This contains a bit-mask describing the minimum size frame that
+* will be bundled. The default masks the lower 7 bits, which means
+* that any frame less than 128 bytes in length will not be bundled,
+* but will instead immediately generate an interrupt. This does
+* not affect the current bundle in any way. Any frame that is 128
+* bytes or large will be bundled normally. This feature is meant
+* to provide immediate indication of ACK frames in a TCP environment.
+* Customers were seeing poor performance when a machine with CPUSaver
+* enabled was sending but not receiving. The delay introduced when
+* the ACKs were received was enough to reduce total throughput, because
+* the sender would sit idle until the ACK was finally seen.
+*
+* The current default is 0xFF80, which masks out the lower 7 bits.
+* This means that any frame which is x7F (127) bytes or smaller
+* will cause an immediate interrupt. Because this value must be a
+* bit mask, there are only a few valid values that can be used. To
+* turn this feature off, the driver can write the value xFFFF to the
+* lower word of this instruction (in the same way that the other
+* parameters are used). Likewise, a value of 0xF800 (2047) would
+* cause an interrupt to be generated for every frame, because all
+* standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+
+/* if you wish to disable the ucode functionality, while maintaining the
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ goto noloaducode;
+
+ /* Search for ucode match against h/w rev_id */
+ for (opts = ucode_opts; opts->mac; opts++) {
+ int i;
+ u32 *ucode = opts->ucode;
+ if (nic->mac != opts->mac)
+ continue;
+
+ /* Insert user-tunable settings */
+ ucode[opts->timer_dword] &= 0xFFFF0000;
+ ucode[opts->timer_dword] |= INTDELAY;
+ ucode[opts->bundle_dword] &= 0xFFFF0000;
+ ucode[opts->bundle_dword] |= BUNDLEMAX;
+ ucode[opts->min_size_dword] &= 0xFFFF0000;
+ ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;

- if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
- for(i = 0; i < UCODE_SIZE; i++)
+ for (i = 0; i < UCODE_SIZE; i++)
cb->u.ucode[i] = cpu_to_le32(ucode[i]);
cb->command = cpu_to_le16(cb_ucode);
- } else
- cb->command = cpu_to_le16(cb_nop);
+ return;
+ }
+
+noloaducode:
+ cb->command = cpu_to_le16(cb_nop);
}

static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
diff --git a/drivers/net/fec_8xx/Kconfig b/drivers/net/fec_8xx/Kconfig
index 94e7a9a..a84c232 100644
--- a/drivers/net/fec_8xx/Kconfig
+++ b/drivers/net/fec_8xx/Kconfig
@@ -1,6 +1,6 @@
config FEC_8XX
tristate "Motorola 8xx FEC driver"
- depends on NET_ETHERNET && FEC
+ depends on NET_ETHERNET && 8xx
select MII

config FEC_8XX_GENERIC_PHY
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 6a3129b..9b8295e 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1360,7 +1360,7 @@ static struct pci_driver ioc3_driver = {

static int __init ioc3_init_module(void)
{
- return pci_module_init(&ioc3_driver);
+ return pci_register_driver(&ioc3_driver);
}

static void __exit ioc3_cleanup_module(void)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 159b56a..14a76f7 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1346,10 +1346,8 @@ rtl8169_init_board(struct pci_dev *pdev,
} else {
if (netif_msg_probe(tp)) {
printk(KERN_ERR PFX
- "Cannot find PowerManagement capability. "
- "Aborting.\n");
+ "PowerManagement capability not found.\n");
}
- goto err_out_mwi;
}

/* make sure PCI base addr 1 is MMIO */
@@ -2516,7 +2514,7 @@ rtl8169_interrupt(int irq, void *dev_ins
} while (boguscnt > 0);

if (boguscnt <= 0) {
- if (net_ratelimit() && netif_msg_intr(tp)) {
+ if (netif_msg_intr(tp) && net_ratelimit() ) {
printk(KERN_WARNING
"%s: Too much work at interrupt!\n", dev->name);
}
diff --git a/drivers/net/saa9730.h b/drivers/net/saa9730.h
index 9e9da6b..a7e9d29 100644
--- a/drivers/net/saa9730.h
+++ b/drivers/net/saa9730.h
@@ -1,6 +1,7 @@
/*
- * Carsten Langgaard, carstenl@xxxxxxxx
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@xxxxxxxx>
+ * Maciej W. Rozycki <macro@xxxxxxxx>
*
* ########################################################################
*
@@ -265,6 +266,7 @@

/* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
#define SAA9730_LAN_REGS_ADDR 0x20400
+#define SAA9730_LAN_REGS_SIZE 0x00400

struct lan_saa9730_regmap {
volatile unsigned int TxBuffA; /* 0x20400 */
@@ -309,6 +311,7 @@ typedef volatile struct lan_saa9730_regm

/* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
#define SAA9730_EVM_REGS_ADDR 0x02000
+#define SAA9730_EVM_REGS_SIZE 0x00400

struct evm_saa9730_regmap {
volatile unsigned int InterruptStatus1; /* 0x2000 */
@@ -329,16 +332,32 @@ typedef volatile struct evm_saa9730_regm


struct lan_saa9730_private {
+ /*
+ * Rx/Tx packet buffers.
+ * The Rx and Tx packets must be PACKET_SIZE aligned.
+ */
+ void *buffer_start;
+ unsigned int buffer_size;
+
+ /*
+ * DMA address of beginning of this object, returned
+ * by pci_alloc_consistent().
+ */
+ dma_addr_t dma_addr;
+
+ /* Pointer to the associated pci device structure */
+ struct pci_dev *pci_dev;
+
/* Pointer for the SAA9730 LAN controller register set. */
t_lan_saa9730_regmap *lan_saa9730_regs;

/* Pointer to the SAA9730 EVM register. */
t_evm_saa9730_regmap *evm_saa9730_regs;

- /* TRUE if the next buffer to write is RxBuffA, FALSE if RxBuffB. */
- unsigned char NextRcvToUseIsA;
/* Rcv buffer Index. */
unsigned char NextRcvPacketIndex;
+ /* Next buffer index. */
+ unsigned char NextRcvBufferIndex;

/* Index of next packet to use in that buffer. */
unsigned char NextTxmPacketIndex;
@@ -353,13 +372,8 @@ struct lan_saa9730_private {
unsigned char DmaRcvPackets;
unsigned char DmaTxmPackets;

- unsigned char RcvAIndex; /* index into RcvBufferSpace[] for Blk A */
- unsigned char RcvBIndex; /* index into RcvBufferSpace[] for Blk B */
-
- unsigned int
- TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
- unsigned int
- RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
+ void *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
+ void *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];

unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index c91e2e8..28bf2e6 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -155,6 +155,12 @@ MODULE_LICENSE("GPL");
#define MEMORY_WAIT_TIME 16

/*
+ * The maximum number of processing loops allowed for each call to the
+ * IRQ handler.
+ */
+#define MAX_IRQ_LOOPS 8
+
+/*
* This selects whether TX packets are sent one by one to the SMC91x internal
* memory and throttled until transmission completes. This may prevent
* RX overruns a litle by keeping much of the memory free for RX packets
@@ -684,7 +690,6 @@ static void smc_hardware_send_pkt(unsign

/* queue the packet for TX */
SMC_SET_MMU_CMD(MC_ENQUEUE);
- SMC_ACK_INT(IM_TX_EMPTY_INT);
smc_special_unlock(&lp->lock);

dev->trans_start = jiffies;
@@ -1207,6 +1212,7 @@ static void smc_phy_configure(void *data
smc_phy_check_media(dev, 1);

smc_phy_configure_exit:
+ SMC_SELECT_BANK(2);
spin_unlock_irq(&lp->lock);
lp->work_pending = 0;
}
@@ -1305,7 +1311,7 @@ static irqreturn_t smc_interrupt(int irq
SMC_SET_INT_MASK(0);

/* set a timeout value, so I don't stay here forever */
- timeout = 8;
+ timeout = MAX_IRQ_LOOPS;

do {
status = SMC_GET_INT();
@@ -1372,10 +1378,13 @@ static irqreturn_t smc_interrupt(int irq
/* restore register states */
SMC_SET_PTR(saved_pointer);
SMC_SET_INT_MASK(mask);
-
spin_unlock(&lp->lock);

- DBG(3, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout);
+ if (timeout == MAX_IRQ_LOOPS)
+ PRINTK("%s: spurious interrupt (mask = 0x%02x)\n",
+ dev->name, mask);
+ DBG(3, "%s: Interrupt done (%d loops)\n",
+ dev->name, MAX_IRQ_LOOPS - timeout);

/*
* We return IRQ_HANDLED unconditionally here even if there was
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index a01efa6..1fd0466 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -192,7 +192,9 @@ static int cisco_rx(struct sk_buff *skb)
"uptime %ud%uh%um%us)\n",
dev->name, days, hrs,
min, sec);
+#if 0
netif_carrier_on(dev);
+#endif
hdlc->state.cisco.up = 1;
}
}
@@ -225,7 +227,9 @@ static void cisco_timer(unsigned long ar
hdlc->state.cisco.settings.timeout * HZ)) {
hdlc->state.cisco.up = 0;
printk(KERN_INFO "%s: Link down\n", dev->name);
+#if 0
netif_carrier_off(dev);
+#endif
}

cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
@@ -261,8 +265,10 @@ static void cisco_stop(struct net_device
{
hdlc_device *hdlc = dev_to_hdlc(dev);
del_timer_sync(&hdlc->state.cisco.timer);
+#if 0
if (netif_carrier_ok(dev))
netif_carrier_off(dev);
+#endif
hdlc->state.cisco.up = 0;
hdlc->state.cisco.request_sent = 0;
}
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index e1601d3..523afe1 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -545,8 +545,10 @@ static void fr_set_link_state(int reliab

hdlc->state.fr.reliable = reliable;
if (reliable) {
+#if 0
if (!netif_carrier_ok(dev))
netif_carrier_on(dev);
+#endif

hdlc->state.fr.n391cnt = 0; /* Request full status */
hdlc->state.fr.dce_changed = 1;
@@ -560,8 +562,10 @@ static void fr_set_link_state(int reliab
}
}
} else {
+#if 0
if (netif_carrier_ok(dev))
netif_carrier_off(dev);
+#endif

while (pvc) { /* Deactivate all PVCs */
pvc_carrier(0, pvc);
diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c
index cdd4c09..46cef8f 100644
--- a/drivers/net/wan/hdlc_generic.c
+++ b/drivers/net/wan/hdlc_generic.c
@@ -79,11 +79,13 @@ static void __hdlc_set_carrier_on(struct
hdlc_device *hdlc = dev_to_hdlc(dev);
if (hdlc->proto.start)
return hdlc->proto.start(dev);
+#if 0
#ifdef DEBUG_LINK
if (netif_carrier_ok(dev))
printk(KERN_ERR "hdlc_set_carrier_on(): already on\n");
#endif
netif_carrier_on(dev);
+#endif
}


@@ -94,11 +96,13 @@ static void __hdlc_set_carrier_off(struc
if (hdlc->proto.stop)
return hdlc->proto.stop(dev);

+#if 0
#ifdef DEBUG_LINK
if (!netif_carrier_ok(dev))
printk(KERN_ERR "hdlc_set_carrier_off(): already off\n");
#endif
netif_carrier_off(dev);
+#endif
}


@@ -294,8 +298,10 @@ int register_hdlc_device(struct net_devi
if (result != 0)
return -EIO;

+#if 0
if (netif_carrier_ok(dev))
netif_carrier_off(dev); /* no carrier until DCD goes up */
+#endif

return 0;
}
diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
index 579480d..346c6fe 100644
--- a/drivers/net/wireless/hermes.c
+++ b/drivers/net/wireless/hermes.c
@@ -398,7 +398,7 @@ static int hermes_bap_seek(hermes_t *hw,
*
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
*/
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -424,7 +424,7 @@ int hermes_bap_pread(hermes_t *hw, int b
*
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
*/
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -450,7 +450,7 @@ int hermes_bap_pwrite(hermes_t *hw, int
*
* Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
*/
-int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len,
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, int len,
u16 id, u16 offset)
{
int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h
index a6bd472..7644f72 100644
--- a/drivers/net/wireless/hermes.h
+++ b/drivers/net/wireless/hermes.h
@@ -372,12 +372,12 @@ int hermes_docmd_wait(hermes_t *hw, u16
struct hermes_response *resp);
int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);

-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
u16 id, u16 offset);
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
u16 id, u16 offset);
int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
- unsigned data_len, unsigned len, u16 id, u16 offset);
+ unsigned data_len, int len, u16 id, u16 offset);
int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
u16 *length, void *buf);
int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h
index 33acb8a..afac5c7 100644
--- a/drivers/net/wireless/i82593.h
+++ b/drivers/net/wireless/i82593.h
@@ -7,11 +7,16 @@
*
* Copyright 1994, Anders Klemets <klemets@xxxxxxxxx>
*
- * This software may be freely distributed for noncommercial purposes
- * as long as this notice is retained.
- *
* HISTORY
* i82593.h,v
+ * Revision 1.4 2005/11/4 09:15:00 baroniunas
+ * Modified copyright with permission of author as follows:
+ *
+ * "If I82539.H is the only file with my copyright statement
+ * that is included in the Source Forge project, then you have
+ * my approval to change the copyright statement to be a GPL
+ * license, in the way you proposed on October 10."
+ *
* Revision 1.1 1996/07/17 15:23:12 root
* Initial revision
*
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index a2e6214..77d2a21 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6344,7 +6344,8 @@ static struct net_device *ipw2100_alloc_
dev->ethtool_ops = &ipw2100_ethtool_ops;
dev->tx_timeout = ipw2100_tx_timeout;
dev->wireless_handlers = &ipw2100_wx_handler_def;
- dev->get_wireless_stats = ipw2100_wx_wireless_stats;
+ priv->wireless_data.ieee80211 = priv->ieee;
+ dev->wireless_data = &priv->wireless_data;
dev->set_mac_address = ipw2100_set_address;
dev->watchdog_timeo = 3 * HZ;
dev->irq = 0;
@@ -7178,6 +7179,11 @@ static int ipw2100_wx_get_range(struct n
}
range->num_frequency = val;

+ /* Event capability (kernel + driver) */
+ range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
+ IW_EVENT_CAPA_MASK(SIOCGIWAP));
+ range->event_capa[1] = IW_EVENT_CAPA_K_1;
+
IPW_DEBUG_WX("GET Range\n");

return 0;
@@ -8446,16 +8452,6 @@ static iw_handler ipw2100_private_handle
#endif /* CONFIG_IPW2100_MONITOR */
};

-static struct iw_handler_def ipw2100_wx_handler_def = {
- .standard = ipw2100_wx_handlers,
- .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
- .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
- .num_private_args = sizeof(ipw2100_private_args) /
- sizeof(struct iw_priv_args),
- .private = (iw_handler *) ipw2100_private_handler,
- .private_args = (struct iw_priv_args *)ipw2100_private_args,
-};
-
/*
* Get wireless statistics.
* Called by /proc/net/wireless
@@ -8597,6 +8593,17 @@ static struct iw_statistics *ipw2100_wx_
return (struct iw_statistics *)NULL;
}

+static struct iw_handler_def ipw2100_wx_handler_def = {
+ .standard = ipw2100_wx_handlers,
+ .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
+ .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
+ .num_private_args = sizeof(ipw2100_private_args) /
+ sizeof(struct iw_priv_args),
+ .private = (iw_handler *) ipw2100_private_handler,
+ .private_args = (struct iw_priv_args *)ipw2100_private_args,
+ .get_wireless_stats = ipw2100_wx_wireless_stats,
+};
+
static void ipw2100_wx_event_work(struct ipw2100_priv *priv)
{
union iwreq_data wrqu;
diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h
index 140fdf2..7c65b10 100644
--- a/drivers/net/wireless/ipw2100.h
+++ b/drivers/net/wireless/ipw2100.h
@@ -571,6 +571,8 @@ struct ipw2100_priv {
struct net_device *net_dev;
struct iw_statistics wstats;

+ struct iw_public_data wireless_data;
+
struct tasklet_struct irq_tasklet;

struct workqueue_struct *workqueue;
diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c
index 109a96d..23deee6 100644
--- a/drivers/net/wireless/prism54/isl_38xx.c
+++ b/drivers/net/wireless/prism54/isl_38xx.c
@@ -164,12 +164,12 @@ isl38xx_trigger_device(int asleep, void
/* assert the Wakeup interrupt in the Device Interrupt Register */
isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
ISL38XX_DEV_INT_REG);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
udelay(ISL38XX_WRITEIO_DELAY);

/* perform another read on the Device Status Register */
reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
do_gettimeofday(&current_time);
DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
current_time.tv_sec, (long)current_time.tv_usec, reg);
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index b93fd8c..cde2f4f 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -1042,7 +1042,7 @@ static inline u8 *ieee80211_get_payload(
case IEEE80211_4ADDR_LEN:
return ((struct ieee80211_hdr_4addr *)hdr)->payload;
}
-
+ return NULL;
}

static inline int ieee80211_is_ofdm_rate(u8 rate)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/