Re: Gene's pcHDTV 3000 analog problem

[Perry Gilfillan]

Mauro Carvalho Chehab wrote:

> 	After checking the datasheets of Thompson tuner, and I have one guess:
>
> 	At board description, tda9887 is not there. This tuner needs to work
> properly.
>
> 	This small patch does enable it for your board.
>
> 	You should notice that you may need to use some parameters for tda0887
> to work properly, like using port1=0 port2=0 qss=0 as insmod options for
> this module. (these are some on/off bits at the chip, to enable some
> special functions - if 0/0/0 doesn't work you may need to test 0/0/1, ..
> 1/1/1).
>  
This has fixed it for me!!  I compiled todays cvs, with out this patch, 
to watch it fail, then added the line as noted, and reloaded the modules 
without rebooting, and it worked.  I did a cold start to see that it is 
repeatable, and it continues to work.  I used no extra parameters, so 
the defaults are working fine.

Cheers,

Perry

> Cheers, 
> Mauro.
>  
>
> ------------------------------------------------------------------------
>
> Index: linux/drivers/media/video/cx88/cx88-cards.c
> ===================================================================
> RCS file: /cvs/video4linux/v4l-dvb/linux/drivers/media/video/cx88/cx88-cards.c,v
> retrieving revision 1.108
> diff -u -p -r1.108 cx88-cards.c
> --- linux/drivers/media/video/cx88/cx88-cards.c	25 Nov 2005 10:24:13 -0000	1.108
> +++ linux/drivers/media/video/cx88/cx88-cards.c	1 Dec 2005 20:56:43 -0000
> @@ -569,6 +569,7 @@ struct cx88_board cx88_boards[] = {
> 		.radio_type     = UNSET,
> 		.tuner_addr	= ADDR_UNSET,
> 		.radio_addr	= ADDR_UNSET,
> +		.tda9887_conf   = TDA9887_PRESENT,
> 		.input          = {{
> 			.type   = CX88_VMUX_TELEVISION,
> 			.vmux   = 0,
>  

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/