Re: [RFC] i2c: Combined ST m41txx i2c rtc chip driver (was: [PATCH 1/1] Added support of ST m41t85 rtc chip)
From: Mark A. Greer
Date: Mon Dec 19 2005 - 16:06:36 EST
On Mon, Dec 19, 2005 at 02:03:25PM -0700, Mark A. Greer wrote:
> [I will send a second patch that contains the changes I made to the ppc
> katana platform that has the m41t00 that I tested with.]
FYI, here are the code changes with an updated defconfig for the platform.
Mark
---
configs/katana_defconfig | 99 +++++++++++++++++++++++++++++++----------------
platforms/katana.c | 37 +++++++++++++++--
2 files changed, 99 insertions(+), 37 deletions(-)
---
diff -Nurp linux-2.6.15-rc5-mm3.orig/arch/ppc/configs/katana_defconfig linux-2.6.15-rc5-mm3-m41txx/arch/ppc/configs/katana_defconfig
--- linux-2.6.15-rc5-mm3.orig/arch/ppc/configs/katana_defconfig 2005-12-03 22:10:42.000000000 -0700
+++ linux-2.6.15-rc5-mm3-m41txx/arch/ppc/configs/katana_defconfig 2005-12-19 13:16:25.000000000 -0700
@@ -1,17 +1,17 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep 1 17:16:03 2005
+# Linux kernel version: 2.6.15-rc5-mm1
+# Fri Dec 16 16:12:10 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -27,20 +27,21 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
+CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -49,8 +50,11 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -64,6 +68,25 @@ CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Processor
#
CONFIG_6xx=y
@@ -84,11 +107,6 @@ CONFIG_PPC_STD_MMU=y
CONFIG_NOT_COHERENT_CACHE=y
#
-# Performance-monitoring counters support
-#
-# CONFIG_PERFCTR is not set
-
-#
# Platform options
#
# CONFIG_PPC_MULTIPLATFORM is not set
@@ -144,11 +162,13 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyMM0 ip=on"
# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -156,6 +176,8 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
@@ -241,14 +263,16 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -266,6 +290,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
@@ -283,6 +312,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -347,6 +377,11 @@ CONFIG_MTD_PHRAM=y
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -372,16 +407,7 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -418,6 +444,7 @@ CONFIG_IOSCHED_CFQ=y
#
# Macintosh device drivers
#
+# CONFIG_WINDFARM is not set
#
# Network device support
@@ -445,6 +472,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -599,7 +627,6 @@ CONFIG_SERIAL_MPSC=y
CONFIG_SERIAL_MPSC_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -631,6 +658,7 @@ CONFIG_GEN_RTC=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -682,14 +710,20 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_M41T00=y
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+CONFIG_RTC_M41TXX_I2C=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
+# SPI support
+#
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -728,6 +762,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
@@ -782,6 +817,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -801,6 +840,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
#
+# EDAC - error detection and reporting (RAS)
+#
+
+#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
@@ -816,10 +859,6 @@ CONFIG_EXT2_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
@@ -853,8 +892,8 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -917,10 +956,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
# CONFIG_PROFILING is not set
#
diff -Nurp linux-2.6.15-rc5-mm3.orig/arch/ppc/platforms/katana.c linux-2.6.15-rc5-mm3-m41txx/arch/ppc/platforms/katana.c
--- linux-2.6.15-rc5-mm3.orig/arch/ppc/platforms/katana.c 2005-12-03 22:10:42.000000000 -0700
+++ linux-2.6.15-rc5-mm3-m41txx/arch/ppc/platforms/katana.c 2005-12-19 13:16:25.000000000 -0700
@@ -30,6 +30,7 @@
#include <linux/mtd/physmap.h>
#include <linux/mv643xx.h>
#include <linux/platform_device.h>
+#include <linux/m41txx.h>
#ifdef CONFIG_BOOTIMG
#include <linux/bootimg.h>
#endif
@@ -845,17 +846,43 @@ katana_find_end_of_memory(void)
return bdp->bi_memsize;
}
-#if defined(CONFIG_I2C_MV64XXX) && defined(CONFIG_SENSORS_M41T00)
-extern ulong m41t00_get_rtc_time(void);
-extern int m41t00_set_rtc_time(ulong);
+#if defined(CONFIG_I2C_MV64XXX) && defined(CONFIG_RTC_M41TXX_I2C)
+static struct m41txx_platform_data katana_m41txx_pdata = {
+ .type = M41TXX_TYPE_M41T00,
+ .i2c_addr = M41TXX_I2C_ADDR,
+};
+
+static struct platform_device katana_m41txx_pdev = {
+ .name = M41TXX_DRV_NAME,
+ .id = 0,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &katana_m41txx_pdata,
+ },
+};
+
+static int __init
+katana_add_pdata(void)
+{
+ int rc;
+
+ if ((rc = platform_device_register(&katana_m41txx_pdev)))
+ platform_device_unregister(&katana_m41txx_pdev);
+
+ return rc;
+}
+arch_initcall(katana_add_pdata);
+
+extern ulong m41txx_get_rtc_time(void);
+extern int m41txx_set_rtc_time(ulong);
static int __init
katana_rtc_hookup(void)
{
struct timespec tv;
- ppc_md.get_rtc_time = m41t00_get_rtc_time;
- ppc_md.set_rtc_time = m41t00_set_rtc_time;
+ ppc_md.get_rtc_time = m41txx_get_rtc_time;
+ ppc_md.set_rtc_time = m41txx_set_rtc_time;
tv.tv_nsec = 0;
tv.tv_sec = (ppc_md.get_rtc_time)();
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/