ALSA - pnp OS bios option

From: Nick Warne
Date: Mon Jan 09 2006 - 15:22:04 EST


Hi all,

On New Years eve my CPU (Athlon 1200 ams3b) died. I managed to get a
replacement off e-bay. During my diagnosis of what happened, I reset BIOS,
so obviously when I got the replacement I had to set it all up again.


Info: 2.6.15, on base Slack 10 (updated a lot from source).

PCI:

00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev
22)
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 10)
00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
(rev 10)
00:07.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller]
(rev 10)
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
30)
00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev
78)
00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
00:0f.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev
07)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440]
(rev a3)



If I turn OFF PNP OS, when I boot, 'alsactl restore' (run from rc.local)
squinnies:

Set_Control:894 Name mismatch ... Control #47
896: Index mismatch (0/0) for Control #47
1008: Bad control.47.value

Then I messed with alsamixer/aslactl store~restore etc. and all appeared OK in
console - but sound is all messed as if no restore was done. And I get the
same error on boot again.

Turn ON PNP OS in BIOS, and all works again, alsactl restore works fine.

Now, after the issue I had with my CPU dying, I hate keep rebooting to test
this, but the tests I done appear as above.

So, is this something else? Or do I need to set PNP OS in BIOS for ALSA?

Nick
--
"Person who say it cannot be done should not interrupt person doing it."
-Chinese Proverb
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/