[Patch v2] Replacing 0xff.. with correct DMA_xBIT_MASK

From: M.Gehre
Date: Thu Jan 12 2006 - 15:17:20 EST


From: Matthias Gehre

Included is a patch to replace all occurences of 0xff..
in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask()
with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h.
This patch was made against 2.6.15-git8.

Signed-off-by: Matthias Gehre <M.Gehre@xxxxxx>

---
Task was found on janitor.kernelnewbies.org
This is a new version of an early submitted patch.
It's now against 2.6.15-git8 and includes some instances
that had been forgotten the last time.
Please CC answer to me.

diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/Documentation/DMA-mapping.txt linux-2.6.15-git8_patch/Documentation/DMA-mapping.txt
--- linux-2.6.15-git8/Documentation/DMA-mapping.txt 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/Documentation/DMA-mapping.txt 2006-01-12 20:50:27.000000000 +0100
@@ -199,6 +199,8 @@ address during PCI bus mastering you mig
"mydev: 24-bit DMA addressing not available.\n");
goto ignore_this_device;
}
+[Better use DMA_24BIT_MASK instead of 0x00ffffff.
+See linux/include/dma-mapping.h for reference.]

When pci_set_dma_mask() is successful, and returns zero, the PCI layer
saves away this mask you have provided. The PCI layer will use this
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/atm/lanai.c linux-2.6.15-git8_patch/drivers/atm/lanai.c
--- linux-2.6.15-git8/drivers/atm/lanai.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/atm/lanai.c 2006-01-12 21:15:40.000000000 +0100
@@ -1971,7 +1971,7 @@ static int __devinit lanai_pci_start(str
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
}
- if (pci_set_consistent_dma_mask(pci, 0xFFFFFFFF) != 0) {
+ if (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) != 0) {
printk(KERN_WARNING DEV_LABEL
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/block/umem.c linux-2.6.15-git8_patch/drivers/block/umem.c
--- linux-2.6.15-git8/drivers/block/umem.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/block/umem.c 2006-01-12 20:50:27.000000000 +0100
@@ -50,6 +50,7 @@
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/dma-mapping.h>

#include <linux/fcntl.h> /* O_ACCMODE */
#include <linux/hdreg.h> /* HDIO_GETGEO */
@@ -892,8 +893,8 @@ static int __devinit mm_pci_probe(struct
printk(KERN_INFO "Micro Memory(tm) controller #%d found at %02x:%02x (PCI Mem Module (Battery Backup))\n",
card->card_number, dev->bus->number, dev->devfn);

- if (pci_set_dma_mask(dev, 0xffffffffffffffffLL) &&
- !pci_set_dma_mask(dev, 0xffffffffLL)) {
+ if (pci_set_dma_mask(dev, DMA_64BIT_MASK) &&
+ !pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "MM%d: NO suitable DMA found\n",num_cards);
return -ENOMEM;
}
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/net/forcedeth.c linux-2.6.15-git8_patch/drivers/net/forcedeth.c
--- linux-2.6.15-git8/drivers/net/forcedeth.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/net/forcedeth.c 2006-01-12 20:50:27.000000000 +0100
@@ -124,6 +124,7 @@
#include <linux/random.h>
#include <linux/init.h>
#include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>

#include <asm/irq.h>
#include <asm/io.h>
@@ -2310,7 +2311,7 @@ static int __devinit nv_probe(struct pci
if (id->driver_data & DEV_HAS_HIGH_DMA) {
/* packet format 3: supports 40-bit addressing */
np->desc_ver = DESC_VER_3;
- if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+ if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) {
printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
pci_name(pci_dev));
}
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/net/ioc3-eth.c linux-2.6.15-git8_patch/drivers/net/ioc3-eth.c
--- linux-2.6.15-git8/drivers/net/ioc3-eth.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/net/ioc3-eth.c 2006-01-12 21:16:17.000000000 +0100
@@ -44,6 +44,7 @@
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
+#include <linux/dma-mapping.h>

#ifdef CONFIG_SERIAL_8250
#include <linux/serial.h>
@@ -1193,17 +1194,17 @@ static int ioc3_probe(struct pci_dev *pd
int err, pci_using_dac;

/* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
if (!err) {
pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
"for consistent allocations\n", pci_name(pdev));
goto out;
}
} else {
- err = pci_set_dma_mask(pdev, 0xffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR "%s: No usable DMA configuration, "
"aborting.\n", pci_name(pdev));
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/net/ns83820.c linux-2.6.15-git8_patch/drivers/net/ns83820.c
--- linux-2.6.15-git8/drivers/net/ns83820.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/net/ns83820.c 2006-01-12 20:50:27.000000000 +0100
@@ -1831,10 +1831,10 @@ static int __devinit ns83820_init_one(st
int using_dac = 0;

/* See if we can set the dma mask early on; failure is fatal. */
- if (sizeof(dma_addr_t) == 8 &&
- !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) {
+ if (sizeof(dma_addr_t) == 8 &&
+ !pci_set_dma_mask(pci_dev, DMA_64BIT_MASK)) {
using_dac = 1;
- } else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
+ } else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
using_dac = 0;
} else {
printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n");
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/net/tg3.c linux-2.6.15-git8_patch/drivers/net/tg3.c
--- linux-2.6.15-git8/drivers/net/tg3.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/net/tg3.c 2006-01-12 21:02:03.000000000 +0100
@@ -37,6 +37,7 @@
#include <linux/tcp.h>
#include <linux/workqueue.h>
#include <linux/prefetch.h>
+#include <linux/dma-mapping.h>

#include <net/checksum.h>

@@ -10492,17 +10493,17 @@ static int __devinit tg3_init_one(struct
}

/* Configure DMA attributes. */
- err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
if (!err) {
pci_using_dac = 1;
- err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR PFX "Unable to obtain 64 bit DMA "
"for consistent allocations\n");
goto err_out_free_res;
}
} else {
- err = pci_set_dma_mask(pdev, 0xffffffffULL);
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR PFX "No usable DMA configuration, "
"aborting.\n");
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/net/wan/wanxl.c linux-2.6.15-git8_patch/drivers/net/wan/wanxl.c
--- linux-2.6.15-git8/drivers/net/wan/wanxl.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/net/wan/wanxl.c 2006-01-12 20:50:27.000000000 +0100
@@ -577,8 +577,8 @@ static int __devinit wanxl_pci_init_one(
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
- if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) ||
- pci_set_dma_mask(pdev, 0x0FFFFFFF)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
+ pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/net/wireless/prism54/islpci_hotplug.c linux-2.6.15-git8_patch/drivers/net/wireless/prism54/islpci_hotplug.c
--- linux-2.6.15-git8/drivers/net/wireless/prism54/islpci_hotplug.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/net/wireless/prism54/islpci_hotplug.c 2006-01-12 20:50:27.000000000 +0100
@@ -23,6 +23,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/init.h> /* For __init, __exit */
+#include <linux/dma-mapping.h>

#include "prismcompat.h"
#include "islpci_dev.h"
@@ -125,7 +126,7 @@ prism54_probe(struct pci_dev *pdev, cons
}

/* enable PCI DMA */
- if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
goto do_pci_disable_device;
}
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/a100u2w.c linux-2.6.15-git8_patch/drivers/scsi/a100u2w.c
--- linux-2.6.15-git8/drivers/scsi/a100u2w.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/a100u2w.c 2006-01-12 20:50:27.000000000 +0100
@@ -89,6 +89,7 @@
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/slab.h>
+#include <linux/dma-mapping.h>

#include <asm/io.h>
#include <asm/irq.h>
@@ -1052,7 +1053,7 @@ static int __devinit inia100_probe_one(s

if (pci_enable_device(pdev))
goto out;
- if (pci_set_dma_mask(pdev, 0xffffffffULL)) {
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "Unable to set 32bit DMA "
"on inia100 adapter, ignoring.\n");
goto out_disable_device;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/aacraid/aachba.c linux-2.6.15-git8_patch/drivers/scsi/aacraid/aachba.c
--- linux-2.6.15-git8/drivers/scsi/aacraid/aachba.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/aacraid/aachba.c 2006-01-12 21:04:50.000000000 +0100
@@ -32,6 +32,7 @@
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>

@@ -822,12 +823,12 @@ int aac_get_adapter_info(struct aac_dev*
dev->dac_support = (dacmode!=0);
}
if(dev->dac_support != 0) {
- if (!pci_set_dma_mask(dev->pdev, 0xFFFFFFFFFFFFFFFFULL) &&
- !pci_set_consistent_dma_mask(dev->pdev, 0xFFFFFFFFFFFFFFFFULL)) {
+ if (!pci_set_dma_mask(dev->pdev, DMA_64BIT_MASK) &&
+ !pci_set_consistent_dma_mask(dev->pdev, DMA_64BIT_MASK)) {
printk(KERN_INFO"%s%d: 64 Bit DAC enabled\n",
dev->name, dev->id);
- } else if (!pci_set_dma_mask(dev->pdev, 0xFFFFFFFFULL) &&
- !pci_set_consistent_dma_mask(dev->pdev, 0xFFFFFFFFULL)) {
+ } else if (!pci_set_dma_mask(dev->pdev, DMA_32BIT_MASK) &&
+ !pci_set_consistent_dma_mask(dev->pdev, DMA_32BIT_MASK)) {
printk(KERN_INFO"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
dev->name, dev->id);
dev->dac_support = 0;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/aacraid/linit.c linux-2.6.15-git8_patch/drivers/scsi/aacraid/linit.c
--- linux-2.6.15-git8/drivers/scsi/aacraid/linit.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/aacraid/linit.c 2006-01-12 21:06:03.000000000 +0100
@@ -49,6 +49,7 @@
#include <linux/ioctl32.h>
#include <linux/delay.h>
#include <linux/smp_lock.h>
+#include <linux/dma-mapping.h>
#include <asm/semaphore.h>

#include <scsi/scsi.h>
@@ -752,16 +753,16 @@ static int __devinit aac_probe_one(struc
if (error)
goto out;

- if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL) ||
- pci_set_consistent_dma_mask(pdev, 0xFFFFFFFFULL))
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
+ pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))
goto out;
/*
* If the quirk31 bit is set, the adapter needs adapter
* to driver communication memory to be allocated below 2gig
*/
if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
- if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
- pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
+ if (pci_set_dma_mask(pdev, DMA_31BIT_MASK) ||
+ pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK))
goto out;

pci_set_master(pdev);
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/atp870u.c linux-2.6.15-git8_patch/drivers/scsi/atp870u.c
--- linux-2.6.15-git8/drivers/scsi/atp870u.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/atp870u.c 2006-01-12 20:50:28.000000000 +0100
@@ -28,6 +28,7 @@
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
#include <asm/system.h>
#include <asm/io.h>

@@ -2632,7 +2633,7 @@ static int atp870u_probe(struct pci_dev
if (pci_enable_device(pdev))
return -EIO;

- if (!pci_set_dma_mask(pdev, 0xFFFFFFFFUL)) {
+ if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
} else {
printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/BusLogic.c linux-2.6.15-git8_patch/drivers/scsi/BusLogic.c
--- linux-2.6.15-git8/drivers/scsi/BusLogic.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/BusLogic.c 2006-01-12 20:50:28.000000000 +0100
@@ -41,6 +41,7 @@
#include <linux/stat.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
#include <scsi/scsicam.h>

#include <asm/dma.h>
@@ -676,7 +677,7 @@ static int __init BusLogic_InitializeMul
if (pci_enable_device(PCI_Device))
continue;

- if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+ if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK ))
continue;

Bus = PCI_Device->bus->number;
@@ -831,7 +832,7 @@ static int __init BusLogic_InitializeMul
if (pci_enable_device(PCI_Device))
continue;

- if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+ if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
continue;

Bus = PCI_Device->bus->number;
@@ -885,7 +886,7 @@ static int __init BusLogic_InitializeFla
if (pci_enable_device(PCI_Device))
continue;

- if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+ if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
continue;

Bus = PCI_Device->bus->number;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/dpt_i2o.c linux-2.6.15-git8_patch/drivers/scsi/dpt_i2o.c
--- linux-2.6.15-git8/drivers/scsi/dpt_i2o.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/dpt_i2o.c 2006-01-12 20:50:28.000000000 +0100
@@ -57,6 +57,7 @@ MODULE_DESCRIPTION("Adaptec I2O RAID Dri
#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
+#include <linux/dma-mapping.h>

#include <linux/timer.h>
#include <linux/string.h>
@@ -883,8 +884,8 @@ static int adpt_install_hba(struct scsi_
return -EINVAL;
}
pci_set_master(pDev);
- if (pci_set_dma_mask(pDev, 0xffffffffffffffffULL) &&
- pci_set_dma_mask(pDev, 0xffffffffULL))
+ if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) &&
+ pci_set_dma_mask(pDev, DMA_32BIT_MASK))
return -EINVAL;

base_addr0_phys = pci_resource_start(pDev,0);
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/eata.c linux-2.6.15-git8_patch/drivers/scsi/eata.c
--- linux-2.6.15-git8/drivers/scsi/eata.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/eata.c 2006-01-12 20:50:28.000000000 +0100
@@ -490,6 +490,7 @@
#include <linux/init.h>
#include <linux/ctype.h>
#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
#include <asm/io.h>
@@ -1428,7 +1429,7 @@ static int port_detect(unsigned long por

if (ha->pdev) {
pci_set_master(ha->pdev);
- if (pci_set_dma_mask(ha->pdev, 0xffffffff))
+ if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK))
printk("%s: warning, pci_set_dma_mask failed.\n",
ha->board_name);
}
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/gdth.c linux-2.6.15-git8_patch/drivers/scsi/gdth.c
--- linux-2.6.15-git8/drivers/scsi/gdth.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/gdth.c 2006-01-12 20:50:28.000000000 +0100
@@ -388,6 +388,7 @@
#include <linux/proc_fs.h>
#include <linux/time.h>
#include <linux/timer.h>
+#include <linux/dma-mapping.h>
#ifdef GDTH_RTC
#include <linux/mc146818rtc.h>
#endif
@@ -4527,15 +4528,15 @@ static int __init gdth_detect(Scsi_Host_
if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||
/* 64-bit DMA only supported from FW >= x.43 */
(!ha->dma64_support)) {
- if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: Unable to set 32-bit DMA\n", hanum);
err = TRUE;
}
} else {
shp->max_cmd_len = 16;
- if (!pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffffffffffffULL)) {
+ if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) {
printk("GDT-PCI %d: 64-bit DMA enabled\n", hanum);
- } else if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+ } else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: Unable to set 64/32-bit DMA\n", hanum);
err = TRUE;
}
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/initio.c linux-2.6.15-git8_patch/drivers/scsi/initio.c
--- linux-2.6.15-git8/drivers/scsi/initio.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/initio.c 2006-01-12 20:50:28.000000000 +0100
@@ -127,6 +127,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>

#include <scsi/scsi.h>
@@ -2780,7 +2781,7 @@ static int tul_NewReturnNumberOfAdapters
if (((dRegValue & 0xFF00) >> 8) == 0xFF)
dRegValue = 0;
wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
- if (pci_set_dma_mask(pDev, 0xffffffff)) {
+ if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) {
printk(KERN_WARNING
"i91u: Could not set 32 bit DMA mask\n");
continue;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/ips.c linux-2.6.15-git8_patch/drivers/scsi/ips.c
--- linux-2.6.15-git8/drivers/scsi/ips.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/ips.c 2006-01-12 20:50:28.000000000 +0100
@@ -178,6 +178,7 @@

#include <linux/blkdev.h>
#include <linux/types.h>
+#include <linux/dma-mapping.h>

#include <scsi/sg.h>

@@ -7300,10 +7301,10 @@ ips_init_phase1(struct pci_dev *pci_dev,
* are guaranteed to be < 4G.
*/
if (IPS_ENABLE_DMA64 && IPS_HAS_ENH_SGLIST(ha) &&
- !pci_set_dma_mask(ha->pcidev, 0xffffffffffffffffULL)) {
+ !pci_set_dma_mask(ha->pcidev, DMA_64BIT_MASK)) {
(ha)->flags |= IPS_HA_ENH_SG;
} else {
- if (pci_set_dma_mask(ha->pcidev, 0xffffffffULL) != 0) {
+ if (pci_set_dma_mask(ha->pcidev, DMA_32BIT_MASK) != 0) {
printk(KERN_WARNING "Unable to set DMA Mask\n");
return ips_abort_init(ha, index);
}
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/megaraid.c linux-2.6.15-git8_patch/drivers/scsi/megaraid.c
--- linux-2.6.15-git8/drivers/scsi/megaraid.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/megaraid.c 2006-01-12 20:50:28.000000000 +0100
@@ -44,6 +44,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/dma-mapping.h>
#include <scsi/scsicam.h>

#include "scsi.h"
@@ -2090,7 +2091,7 @@ make_local_pdev(adapter_t *adapter, stru

memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));

- if( pci_set_dma_mask(*pdev, 0xffffffff) != 0 ) {
+ if( pci_set_dma_mask(*pdev, DMA_32BIT_MASK) != 0 ) {
kfree(*pdev);
return -1;
}
@@ -4865,10 +4866,10 @@ megaraid_probe_one(struct pci_dev *pdev,

/* Set the Mode of addressing to 64 bit if we can */
if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
- pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+ pci_set_dma_mask(pdev, DMA_64BIT_MASK);
adapter->has_64bit_addr = 1;
} else {
- pci_set_dma_mask(pdev, 0xffffffff);
+ pci_set_dma_mask(pdev, DMA_32BIT_MASK);
adapter->has_64bit_addr = 0;
}

diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/nsp32.c linux-2.6.15-git8_patch/drivers/scsi/nsp32.c
--- linux-2.6.15-git8/drivers/scsi/nsp32.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/nsp32.c 2006-01-12 20:50:28.000000000 +0100
@@ -38,6 +38,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ctype.h>
+#include <linux/dma-mapping.h>

#include <asm/dma.h>
#include <asm/system.h>
@@ -2776,7 +2777,7 @@ static int nsp32_detect(Scsi_Host_Templa
/*
* setup DMA
*/
- if (pci_set_dma_mask(PCIDEV, 0xffffffffUL) != 0) {
+ if (pci_set_dma_mask(PCIDEV, DMA_32BIT_MASK) != 0) {
nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
goto scsi_unregister;
}
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/qla1280.c linux-2.6.15-git8_patch/drivers/scsi/qla1280.c
--- linux-2.6.15-git8/drivers/scsi/qla1280.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/qla1280.c 2006-01-12 20:50:28.000000000 +0100
@@ -348,6 +348,7 @@
#include <linux/pci_ids.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/dma-mapping.h>

#include <asm/io.h>
#include <asm/irq.h>
@@ -4571,7 +4572,7 @@ qla1280_probe_one(struct pci_dev *pdev,

#ifdef QLA_64BIT_PTR
if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) {
- if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
@@ -4581,7 +4582,7 @@ qla1280_probe_one(struct pci_dev *pdev,
dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
ha->host_no);
#else
- if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+ if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/drivers/scsi/qlogicfc.c linux-2.6.15-git8_patch/drivers/scsi/qlogicfc.c
--- linux-2.6.15-git8/drivers/scsi/qlogicfc.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/drivers/scsi/qlogicfc.c 2006-01-12 20:50:28.000000000 +0100
@@ -61,6 +61,7 @@
#include <linux/unistd.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
#include "scsi.h"
@@ -737,8 +738,8 @@ static int isp2x00_detect(Scsi_Host_Temp
continue;

/* Try to configure DMA attributes. */
- if (pci_set_dma_mask(pdev, 0xffffffffffffffffULL) &&
- pci_set_dma_mask(pdev, 0xffffffffULL))
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+ pci_set_dma_mask(pdev, DMA_32BIT_MASK))
continue;

host = scsi_register(tmpt, sizeof(struct isp2x00_hostdata));
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/include/linux/dma-mapping.h linux-2.6.15-git8_patch/include/linux/dma-mapping.h
--- linux-2.6.15-git8/include/linux/dma-mapping.h 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/include/linux/dma-mapping.h 2006-01-12 21:01:25.000000000 +0100
@@ -20,6 +20,8 @@ enum dma_data_direction {
#define DMA_31BIT_MASK 0x000000007fffffffULL
#define DMA_30BIT_MASK 0x000000003fffffffULL
#define DMA_29BIT_MASK 0x000000001fffffffULL
+#define DMA_28BIT_MASK 0x000000000fffffffULL
+#define DMA_24BIT_MASK 0x0000000000ffffffULL

#include <asm/dma-mapping.h>

diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/oss/esssolo1.c linux-2.6.15-git8_patch/sound/oss/esssolo1.c
--- linux-2.6.15-git8/sound/oss/esssolo1.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/oss/esssolo1.c 2006-01-12 20:50:28.000000000 +0100
@@ -2346,7 +2346,7 @@ static int __devinit solo1_probe(struct
/* Recording requires 24-bit DMA, so attempt to set dma mask
* to 24 bits first, then 32 bits (playback only) if that fails.
*/
- if (pci_set_dma_mask(pcidev, 0x00ffffff) &&
+ if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK) &&
pci_set_dma_mask(pcidev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "solo1: architecture does not support 24bit or 32bit PCI busmaster DMA\n");
return -ENODEV;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/oss/sonicvibes.c linux-2.6.15-git8_patch/sound/oss/sonicvibes.c
--- linux-2.6.15-git8/sound/oss/sonicvibes.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/oss/sonicvibes.c 2006-01-12 20:50:28.000000000 +0100
@@ -116,6 +116,7 @@
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
#include <linux/gameport.h>
+#include <linux/dma-mapping.h>

#include <asm/io.h>
#include <asm/uaccess.h>
@@ -2551,7 +2552,7 @@ static int __devinit sv_probe(struct pci
return -ENODEV;
if (pcidev->irq == 0)
return -ENODEV;
- if (pci_set_dma_mask(pcidev, 0x00ffffff)) {
+ if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK)) {
printk(KERN_WARNING "sonicvibes: architecture does not support 24bit PCI busmaster DMA\n");
return -ENODEV;
}
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/ad1889.c linux-2.6.15-git8_patch/sound/pci/ad1889.c
--- linux-2.6.15-git8/sound/pci/ad1889.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/ad1889.c 2006-01-12 20:50:28.000000000 +0100
@@ -38,6 +38,7 @@
#include <linux/interrupt.h>
#include <linux/compiler.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>

#include <sound/driver.h>
#include <sound/core.h>
@@ -920,8 +921,8 @@ snd_ad1889_create(snd_card_t *card,
return err;

/* check PCI availability (32bit DMA) */
- if (pci_set_dma_mask(pci, 0xffffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0xffffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) < 0) {
printk(KERN_ERR PFX "error setting 32-bit DMA mask.\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/ali5451/ali5451.c linux-2.6.15-git8_patch/sound/pci/ali5451/ali5451.c
--- linux-2.6.15-git8/sound/pci/ali5451/ali5451.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/ali5451/ali5451.c 2006-01-12 21:12:09.000000000 +0100
@@ -33,6 +33,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/info.h>
@@ -2238,8 +2239,8 @@ static int __devinit snd_ali_create(snd_
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 31 bits */
- if (pci_set_dma_mask(pci, 0x7fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x7fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_31BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_31BIT_MASK) < 0) {
snd_printk("architecture does not support 31bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/als4000.c linux-2.6.15-git8_patch/sound/pci/als4000.c
--- linux-2.6.15-git8/sound/pci/als4000.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/als4000.c 2006-01-12 21:07:27.000000000 +0100
@@ -65,6 +65,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/rawmidi.h>
@@ -667,8 +668,8 @@ static int __devinit snd_card_als4000_pr
return err;
}
/* check, if we can restrict PCI DMA transfers to 24 bits */
- if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk("architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/azt3328.c linux-2.6.15-git8_patch/sound/pci/azt3328.c
--- linux-2.6.15-git8/sound/pci/azt3328.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/azt3328.c 2006-01-12 21:14:12.000000000 +0100
@@ -99,6 +99,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
@@ -1356,8 +1357,8 @@ static int __devinit snd_azf3328_create(
chip->irq = -1;

/* check if we can restrict PCI DMA transfers to 24 bits */
- if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk("architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/emu10k1/emu10k1x.c linux-2.6.15-git8_patch/sound/pci/emu10k1/emu10k1x.c
--- linux-2.6.15-git8/sound/pci/emu10k1/emu10k1x.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/emu10k1/emu10k1x.c 2006-01-12 20:50:28.000000000 +0100
@@ -35,6 +35,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
@@ -913,8 +914,8 @@ static int __devinit snd_emu10k1x_create

if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
snd_printk(KERN_ERR "error to set 28bit mask DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/es1938.c linux-2.6.15-git8_patch/sound/pci/es1938.c
--- linux-2.6.15-git8/sound/pci/es1938.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/es1938.c 2006-01-12 21:08:32.000000000 +0100
@@ -55,6 +55,7 @@
#include <linux/gameport.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
@@ -1487,8 +1488,8 @@ static int __devinit snd_es1938_create(s
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 24 bits */
- if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk("architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/es1968.c linux-2.6.15-git8_patch/sound/pci/es1968.c
--- linux-2.6.15-git8/sound/pci/es1968.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/es1968.c 2006-01-12 21:09:24.000000000 +0100
@@ -103,6 +103,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/mpu401.h>
@@ -2562,8 +2563,8 @@ static int __devinit snd_es1968_create(s
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
snd_printk("architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/ice1712/ice1712.c linux-2.6.15-git8_patch/sound/pci/ice1712/ice1712.c
--- linux-2.6.15-git8/sound/pci/ice1712/ice1712.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/ice1712/ice1712.c 2006-01-12 21:13:29.000000000 +0100
@@ -55,6 +55,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/cs8427.h>
#include <sound/info.h>
@@ -2522,8 +2523,8 @@ static int __devinit snd_ice1712_create(
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
snd_printk("architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/maestro3.c linux-2.6.15-git8_patch/sound/pci/maestro3.c
--- linux-2.6.15-git8/sound/pci/maestro3.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/maestro3.c 2006-01-12 21:11:09.000000000 +0100
@@ -40,6 +40,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
@@ -2653,8 +2654,8 @@ snd_m3_create(snd_card_t *card, struct p
return -EIO;

/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, 0x0fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x0fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
snd_printk("architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/mixart/mixart.c linux-2.6.15-git8_patch/sound/pci/mixart/mixart.c
--- linux-2.6.15-git8/sound/pci/mixart/mixart.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/mixart/mixart.c 2006-01-12 20:50:28.000000000 +0100
@@ -26,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/info.h>
@@ -1284,7 +1285,7 @@ static int __devinit snd_mixart_probe(st
pci_set_master(pci);

/* check if we can restrict PCI DMA transfers to 32 bits */
- if (pci_set_dma_mask(pci, 0xffffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 32bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/sonicvibes.c linux-2.6.15-git8_patch/sound/pci/sonicvibes.c
--- linux-2.6.15-git8/sound/pci/sonicvibes.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/sonicvibes.c 2006-01-12 21:12:46.000000000 +0100
@@ -30,6 +30,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>

#include <sound/core.h>
#include <sound/pcm.h>
@@ -1243,8 +1244,8 @@ static int __devinit snd_sonicvibes_crea
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 24 bits */
- if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk("architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff -uprN -X linux-2.6.15-git8/Documentation/dontdiff linux-2.6.15-git8/sound/pci/trident/trident_main.c linux-2.6.15-git8_patch/sound/pci/trident/trident_main.c
--- linux-2.6.15-git8/sound/pci/trident/trident_main.c 2005-11-24 23:10:21.000000000 +0100
+++ linux-2.6.15-git8_patch/sound/pci/trident/trident_main.c 2006-01-12 21:10:21.000000000 +0100
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/gameport.h>
+#include <linux/dma-mapping.h>

#include <sound/core.h>
#include <sound/info.h>
@@ -3539,8 +3540,8 @@ int __devinit snd_trident_create(snd_car
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 30 bits */
- if (pci_set_dma_mask(pci, 0x3fffffff) < 0 ||
- pci_set_consistent_dma_mask(pci, 0x3fffffff) < 0) {
+ if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_30BIT_MASK) < 0) {
snd_printk("architecture does not support 30bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
@@ -3949,8 +3950,8 @@ static int snd_trident_resume(snd_card_t
trident_t *trident = card->pm_private_data;

pci_enable_device(trident->pci);
- if (pci_set_dma_mask(trident->pci, 0x3fffffff) < 0 ||
- pci_set_consistent_dma_mask(trident->pci, 0x3fffffff) < 0)
+ if (pci_set_dma_mask(trident->pci, DMA_30BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(trident->pci, DMA_30BIT_MASK) < 0)
snd_printk(KERN_WARNING "trident: can't set the proper DMA mask\n");
pci_set_master(trident->pci); /* to be sure */

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/