Re: BTTV broken on recent kernels

From: Bob Gill
Date: Sun Jan 15 2006 - 21:42:15 EST


Lee Revell wrote:

On Sun, 2006-01-15 at 19:05 -0700, Bob Gill wrote:


Hi. The last several kernel versions have led to broken bttv (up to 4 or 5 kernel versions ago, I could watch tv on either mplayer or xawtv), but lately bttv is broken. My card is an 'bt878 compatible built by ATI (ATI TV Wonder VE). I'm pretty certain it worked as late as 2.6.14-git7.



You need to do a git bisect (check the list archives) to isolate the
change that broke it.

Lee




OK. I will, but I will add a tiny bit of additional info first.
dmesg shows bttv loading up like this:
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ
5
bttv0: Bt878 (rev 2) at 0000:00:0b.0, irq: 5, latency: 32, mmio: 0xeb003000
bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003
bttv0: using: ATI TV-Wonder VE [card=64,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=19
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0060: All bytes are equal. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 0-0060: type set to 19 (Temic PAL* auto (4006 FN5))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
.....and when trying to tune audio comes in, but dmsg shows video giving:
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: SCERR @ 348ec014,bits: HSYNC OFLOW FBUS SCERR*
bttv0: SCERR @ 348ec000,bits: OFLOW FBUS SCERR*
.... I will do the git bisect and reply in a bit.
Thanks for your reply,
Bob
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/