[GIT PATCH 01/18] NSLU2 beeper driver

From: Dmitry Torokhov
Date: Wed Feb 01 2006 - 00:10:44 EST


From: Alessandro Zummo <alessandro.zummo@xxxxxxxxxxxx>

Input: add ixp4xx beeper driver

This is a driver for beeper found in LinkSys NSLU2 boxes. It should work
on any ixp4xx based platform.

Signed-off-by: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---

drivers/input/misc/Kconfig | 12 ++
drivers/input/misc/Makefile | 1
drivers/input/misc/ixp4xx-beeper.c | 183 +++++++++++++++++++++++++++++++++++++
3 files changed, 196 insertions(+)

Index: work/drivers/input/misc/Kconfig
===================================================================
--- work.orig/drivers/input/misc/Kconfig
+++ work/drivers/input/misc/Kconfig
@@ -50,6 +50,18 @@ config INPUT_WISTRON_BTNS
To compile this driver as a module, choose M here: the module will
be called wistron_btns.

+config INPUT_IXP4XX_BEEPER
+ tristate "IXP4XX Beeper support"
+ depends on ARCH_IXP4XX
+ help
+ If you say yes here, you can connect a beeper to the
+ ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ixp4xx-beeper.
+
config INPUT_UINPUT
tristate "User level driver support"
help
Index: work/drivers/input/misc/Makefile
===================================================================
--- work.orig/drivers/input/misc/Makefile
+++ work/drivers/input/misc/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
+obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
Index: work/drivers/input/misc/ixp4xx-beeper.c
===================================================================
--- /dev/null
+++ work/drivers/input/misc/ixp4xx-beeper.c
@@ -0,0 +1,183 @@
+/*
+ * Generic IXP4xx beeper driver
+ *
+ * Copyright (C) 2005 Tower Technologies
+ *
+ * based on nslu2-io.c
+ * Copyright (C) 2004 Karen Spearel
+ *
+ * Author: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("ixp4xx beeper driver");
+MODULE_LICENSE("GPL");
+
+static DEFINE_SPINLOCK(beep_lock);
+
+static void ixp4xx_spkr_control(unsigned int pin, unsigned int count)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&beep_lock, flags);
+
+ if (count) {
+ gpio_line_config(pin, IXP4XX_GPIO_OUT);
+ gpio_line_set(pin, IXP4XX_GPIO_LOW);
+
+ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
+ } else {
+ gpio_line_config(pin, IXP4XX_GPIO_IN);
+ gpio_line_set(pin, IXP4XX_GPIO_HIGH);
+
+ *IXP4XX_OSRT2 = 0;
+ }
+
+ spin_unlock_irqrestore(&beep_lock, flags);
+}
+
+static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+ unsigned int pin = (unsigned int) dev->private;
+ unsigned int count = 0;
+
+ if (type != EV_SND)
+ return -1;
+
+ switch (code) {
+ case SND_BELL:
+ if (value)
+ value = 1000;
+ case SND_TONE:
+ break;
+ default:
+ return -1;
+ }
+
+ if (value > 20 && value < 32767)
+#ifndef FREQ
+ count = (ixp4xx_get_board_tick_rate() / (value * 4)) - 1;
+#else
+ count = (FREQ / (value * 4)) - 1;
+#endif
+
+ ixp4xx_spkr_control(pin, count);
+
+ return 0;
+}
+
+static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* clear interrupt */
+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
+
+ /* flip the beeper output */
+ *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit ixp4xx_spkr_probe(struct platform_device *dev)
+{
+ struct input_dev *input_dev;
+ int err;
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ input_dev->private = (void *) dev->id;
+ input_dev->name = "ixp4xx beeper",
+ input_dev->phys = "ixp4xx/gpio";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x001f;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &dev->dev;
+
+ input_dev->evbit[0] = BIT(EV_SND);
+ input_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ input_dev->event = ixp4xx_spkr_event;
+
+ err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
+ SA_INTERRUPT | SA_TIMER, "ixp4xx-beeper", (void *) dev->id);
+ if (err)
+ goto err_free_device;
+
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_free_irq;
+
+ platform_set_drvdata(dev, input_dev);
+
+ return 0;
+
+ err_free_irq:
+ free_irq(IRQ_IXP4XX_TIMER2, dev);
+ err_free_device:
+ input_free_device(input_dev);
+
+ return err;
+}
+
+static int __devexit ixp4xx_spkr_remove(struct platform_device *dev)
+{
+ struct input_dev *input_dev = platform_get_drvdata(dev);
+ unsigned int pin = (unsigned int) input_dev->private;
+
+ input_unregister_device(input_dev);
+ platform_set_drvdata(dev, NULL);
+
+ /* turn the speaker off */
+ disable_irq(IRQ_IXP4XX_TIMER2);
+ ixp4xx_spkr_control(pin, 0);
+
+ free_irq(IRQ_IXP4XX_TIMER2, dev);
+
+ return 0;
+}
+
+static void ixp4xx_spkr_shutdown(struct platform_device *dev)
+{
+ struct input_dev *input_dev = platform_get_drvdata(dev);
+ unsigned int pin = (unsigned int) input_dev->private;
+
+ /* turn off the speaker */
+ disable_irq(IRQ_IXP4XX_TIMER2);
+ ixp4xx_spkr_control(pin, 0);
+}
+
+static struct platform_driver ixp4xx_spkr_platform_driver = {
+ .driver = {
+ .name = "ixp4xx-beeper",
+ .owner = THIS_MODULE,
+ },
+ .probe = ixp4xx_spkr_probe,
+ .remove = __devexit_p(ixp4xx_spkr_remove),
+ .shutdown = ixp4xx_spkr_shutdown,
+};
+
+static int __init ixp4xx_spkr_init(void)
+{
+ return platform_driver_register(&ixp4xx_spkr_platform_driver);
+}
+
+static void __exit ixp4xx_spkr_exit(void)
+{
+ platform_driver_unregister(&ixp4xx_spkr_platform_driver);
+}
+
+module_init(ixp4xx_spkr_init);
+module_exit(ixp4xx_spkr_exit);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/